Hypergear Turbochargers and High flow Services Development thread

[Manuel Kasko]

But the SS1PU would be more snappy and responsive wouldn't it?

[kingtube69]

Hi Guys,

Is it better to run vacuum off the compressor housing to the boost controller or block that off and run it from the stock location in R33s (intercooler pipe?)

My ATR45SAT has it on the compressor housing and a friend with a similar turbo just blocked off his compressor housing one and ran as per above.

Thanks!

[Manuel Kasko]

I don't think it really matters, both are a pressure source and both are very close to each other.

[kingtube69]

Thanks Dan, I read something similar just wanted to double check.

Another question - Does anyone know what size the studs are on the Hypergear ATR45 turbo dump side - I understand that most are actually bolts but there are two studs also.

[Manuel Kasko]

Should be m8 x 1.25

But someone else will have to confirm I'm correct.

Part numbers are:

Dump->turbo studs: 14414-17F00

Dump->turbo nuts: 14432-0B700

[kingtube69]

What a champion thanks again - I'll wait for someone else to confirm also

[DJBarnstar]

Can you make a kit for the SS1PU that will fit an RB26?

Asking as I will be running E85 and 350 - 390 is plenty for me.

Thanks.

[89CAL]

I'm interested in how much to upgrade SS2 will cost, The new one sounds unreal and mine is due for a retune with E85 and new injectors when I can get all the parts together and on the car so the thought of upgrading turbo sounds good to me

[Dose Pipe Sutututu]

I'm interested in how much to upgrade SS2 will cost, The new one sounds unreal and mine is due for a retune with E85 and new injectors when I can get all the parts together and on the car so the thought of upgrading turbo sounds good to me

the power bug, clearly we both have more than enough power but noooooo let's make more LOL

[Manuel Kasko]

Hey Stao, when you get back just so you don't miss my question but will the SS1PU be more snappy and responsive than the SS2?
Plus more responsive than say the OP6?

[89CAL]

the power bug, clearly we both have more than enough power but noooooo let's make more LOL

Haha.

Honestly, mine is probably about perfect for driving around town, which is pretty much all it does.

But now that we have E85 on pump, i know im going to make more power so may as well make a bit more on top of that

[Dose Pipe Sutututu]

Haha.

Honestly, mine is probably about perfect for driving around town, which is pretty much all it does.

But now that we have E85 on pump, i know im going to make more power so may as well make a bit more on top of that

I just want a little less lag as I track the car quite a bit at Wakefield (which is what I mainly use it for, does see the odd trip to the gym).

I find with the SS2 I need to drop it down to 2nd around certain bends, then bam I have too much torque/power and it's dori & smoke LOL.

However it's tits on the straight at Wakefield, I over take cars like no tomorrow haha.. here's a good clip of just that:

[hypergear]

Hey Stao, when you get back just so you don't miss my question but will the SS1PU be more snappy and responsive than the SS2?

Plus more responsive than say the OP6?

yes that should be, and more responsive then a op6 high flow. but will be maxing towards 270rwkws mark.

[AngryRB]

I just want a little less lag as I track the car quite a bit at Wakefield (which is what I mainly use it for, does see the odd trip to the gym).

I find with the SS2 I need to drop it down to 2nd around certain bends, then bam I have too much torque/power and it's dori & smoke LOL.

However it's tits on the straight at Wakefield, I over take cars like no tomorrow haha.. here's a good clip of just that:

looked like that 34 was slowing for the pits... lol

[Manuel Kasko]

yes that should be, and more responsive then a op6 high flow. but will be maxing towards 270rwkws mark.

270 on pump though yeah?

around 300 on E85?

[hypergear]

Yes have seen 300rwkws on E85.

[chiksluvit]

So response wise

Ss1>old ss2>op6 high flow?

Or ss1> op6 high flow> ss2?

Watching Johnnys video it looks like the op6 picks up earlier?

[Dose Pipe Sutututu]

my SS2 is lags, it's nothing nothing nothing then ALL IN like a rocket ship LOL

these days I drop it back into 2nd on that last turn to keep the revs above 4k

[chiksluvit]

Hrm with the op6 high flow you'll also need to keep the rev above 3.5-4K to make it go like a rocketship

[Dose Pipe Sutututu]

If only I had a Z33 gearbox in my car, that would solve all issues LOL