Jump to content
SAU Community

Recommended Posts

I'll be be keen on seeing results for the td06sl2 int gate billet wheel as Im intrested in one but the kando ones have boost creep issues cause the wastegate hole is too small so hopefully this one outperforms it

Will you have them in t2 aswell ?

T518 style T28 internally gated patterned turbine castings are available. re-make another wastegate port and disc isn't much of a problem. How ever those turbos don't perform an where near to what they do externally gated mainly due to its turbine wheel and housing design.

I think there would be some money to be made if you could make a decent rb bolt on td turbine housing. Seems everything out there is pretty crap

Our current ATR28xx and ATR43xx Rb25det and SR20det internally gated bolton options are pretty mature, they would out perform most of TDxx turbochargers internally gated (and some externally gated). No point going over what ever already done. Do check them out for a bolton internally gated option.

Our Billet TDxx series will be engineered for externally gated purposes.

All turbochargers will be made to order in strict time bases, great support and customer services as always, and we won't be blocking any one on ebay.

Haha thems fighting words. Good work Stao!!

Stao, the nipple that goes in the top of Ss2 cartridge, do you just use a bit of thread sealant on it? The nipple looks like its supposed to have an o-ring on it but the chra is threaded right to the top with no recess for an o-ring. After a drive the top of the chra is damp with oil. Must be loosing 2-3mL each drive.

Putting loctite thread sealant on it now and will test drive again after lunch

Cool that's what I ended up doing earlier on. Just finishing oil pressure sender fault then I'll degrease it and go for a drive.

3 sleeps til it's tuned

Gahh im so impatient!!

How long did it take for people in perth to recieve there kit from over east ?

Its only been 8 Business days but it feels like a eternity!!!!

Looking forward to what it can do with my 34gtt :)

7-9 consecutive days. Mine has been over n back n over

My SS2 goes on dyno in the morning. Unfortunately the exhaust isn't as free flowing as I would like with a cheap Catco Cat on it. Will change it when I get back from Japan next month

7-9 consecutive days. Mine has been over n back n over

My SS2 goes on dyno in the morning. Unfortunately the exhaust isn't as free flowing as I would like with a cheap Catco Cat on it. Will change it when I get back from Japan next month

What mods? Int or ext gate? 98 or 85?

I've already bought my ss2 int gate but won't be putting it on till next month

So a little eager to see someone elses result!

What mods? Int or ext gate? 98 or 85?

I've already bought my ss2 int gate but won't be putting it on till next month

So a little eager to see someone elses result!

In gate, standard manifold port matched n opened up. 98ron. Poncams, port n polish, head chambers decompressed, power FC with nismo 740's,z32,3inch scotty intake,bell mouth dump to cheap cat to single muffler. Hypertwin. Freshly rebuilt engine

Edited by t_revz

Maybe just for the tune get a straight through?

You dont want to have factor in there that will limit your max output

Unless your tuner will do a touchup for cheap when the new one arrives?

Lol @ smash cat.

do it once do it right Trev, don't pay for 2 tunes coz you couldn't afford a real cat. You will need to retune if this one is a restriction and you change it later.

and yeah, you can YOLO it and smash it out. Mines permasmashed lol

I would have if it wasn't already so noisy. The plan is to smash it later and put a Varex mid muffler and retain oval rear muffler I have on it

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Also had a look at the Nissan JP website looks like the 400r has a slightly shorter ratio than than the regular V37 3.133 VS 2.937 which from a guy who has driven both 3.69 vs 4.11 ratios in the S15 is bugger all. Seems that the AUTO Z runs the same ratio as the 400R but can't find any info as to if its an open or LSD? More often than not the auto LSD is open
    • Do not replace the power steering lines with this stuff. If it's anything like the Chase Bays stuff it will leak and be worse than stock. The reason why the reservoir is on the LH/passenger side of the car is because that's just where the reservoir was most convenient to fit. Don't overthink this stuff. The intake/cold side of the engine is pretty busy on these cars. And again, the hardpipe is designed to be a janky power steering cooler. In theory you can replace it with a real power steering cooler but that's really only for track use where boiling the fluid is a distinct possibility. Start with the low pressure lines feeding the pump from the reservoir. Make sure there isn't a bunch of junk in the reservoir filter. Be careful to not get ATF all over the engine bay. I hate dealing with ATF spills, you can clean it up and the slightest crevice will still release more oil that can still drip over time. You also want to inspect for leaks before you make a mess and can't tell what happened. Most likely you have a leak somewhere that is allowing fluid out and air in. Failing that it's allowing air in but not fluid out. Only place I can really see that happening is on the low pressure side because the pump will pull a slight vacuum to draw fluid in. Everything after the pump is high pressure or lower pressure, approaching atmospheric by the time it returns to the reservoir.
    • I did a skidpan night at SMSP this week, it was much cheaper than $350. But yeah, you need to slap an LSD in that thing.  I put an OS Giken in the 370Z and it's f**king MARVELOUS even compared to Nissan's viscous LSD. So you're saying it's free now that it's a housing estate? 😂
    • Nah, the car seems to run exactly as it did prior, in saying this it does "seem" to be better down low, like more eager to rev, but that may be 100% placebo effect from intake noise But, I'm not worried about it at all, in the end it is a fairly low compression NA engine that has a well shrouded intake,  if it is getting hotter IAT I cannot notice anything negative performance wise from the seat of my pants thrashing it about on the street or sitting in traffic, so meh, car now now makes induction noise so I'm happy
    • Do you have an IAT sensor? It's worth checking it to see. You may be suprised how little gap you actually need to flood your engine with hot air. (I tape up my airbox for a reason) :p
×
×
  • Create New...