Jump to content
SAU Community

Recommended Posts

only got 1 run in as i blew an intercooler hose mid 2nd run and i didnt bring any tools to the track :(

from memory it was 13.515 @ 112mph or similar - i am sure i posted my time previously.

i felt like it had a shit load more in it, launch was poor 60" was 2.2 / 2.3 reaction time of .600 i have only been to the drags once prior ever, usually hit barbs :)

Ah pity, I had some tools there you could have borrowed! Was that you that parked in front of me and my mates near the scrutineering shed? I was in the white 34, mates had the maroon 32 and the white Type-R?

Again though, 112mph with 366rwhp... It's a shame you only got one run in. How'd you go at Racewars?

only got 1 run in as i blew an intercooler hose mid 2nd run and i didnt bring any tools to the track :(

from memory it was 13.515 @ 112mph or similar - i am sure i posted my time previously.

i felt like it had a shit load more in it, launch was poor 60" was 2.2 / 2.3 reaction time of .600 i have only been to the drags once prior ever, usually hit barbs :)

Reaction time isn't going to affect your time. Interesting enough your time seems VERY similar to my first ever outing on my GT3076R with a soft tune in it - 14-15psi, 270kw @ hubs (equate to around 245ishrwkw on a DD?) did a similar time and trap speed on street tyres. What boost, and type of dyno was that on?

Here's a link for the dyno plot and time slip from back then: http://www.dragtimes.com/Nissan-Skyline-Timeslip-13888.html

Reaction time isn't going to affect your time. Interesting enough your time seems VERY similar to my first ever outing on my GT3076R with a soft tune in it - 14-15psi, 270kw @ hubs (equate to around 245ishrwkw on a DD?) did a similar time and trap speed on street tyres. What boost, and type of dyno was that on?

Here's a link for the dyno plot and time slip from back then: http://www.dragtimes.com/Nissan-Skyline-Timeslip-13888.html

Its as if you are online waiting for something!! :whistling:

. How'd you go at Racewars?

lol racewars got half a day of racing in for the roll on 400m's then something gave way, goes to Galvsport monday to work out what happened.

Right, not getting too excited just yet as it may be nothing, but I MAY have found a problem that could have been holding me back.

I decided to raise the suspension back up to a driveable height today, and had to take the front bar off to get my jack under. While it wasoff, I noticed the 90 degree silicon joiner on my cold side cooler piping was being crushed against the body where it went through the hole to almost half its diameter :/ Not sure how it happened as no matter what I did it just didn't want to sit elsewhere, so in the end I cut some length off the joiner so that it would sit higher up, as well as using a die grinder to open up the hole a bit more.

It is now fine and back to its full dimensions, so should flow a lot better. Also quite lucky that the joiner isn't damaged at all, I imagine it wouldn't have liked being crushed like that. Anyway, I will take the car for a drive tomorrow and see if it makes any difference to performance.

Any differences after the silicon hose is replaced?

Releasing a cheap bolton turbo that is capable of doing 280rwkws internally gated. The ATR43 3.5. I've done a fair bit of sculpturing in to the imported china turbine housing. This turbo is capable of making 350rwkws on E85, external gate.

I will mark this price on $1100 including the oil line and high pressure actuator.

comp.JPG

turbine.JPG

Result of this turbocharger is page 366

Note since the turbine end is largely over sized. Make sure the factory dump pipe gasket and dump pipe flange is all touched up as its not in the way of flow.

I will sculpt another turbine housing for it that supports both external or internal waste gating like the SS2 .82.

As explained before the savings comes from the turbine housing (cost by KGs), that requires less parts or machinery work.

Compare to the ATR43xx series, because they were built in matched housings, they do picks up more mid range, and better response. So they are still the better bolton / Ext gate turbos.

But like I said it is a cheaper alternative, and will perform better then standard high flows. And I guess the biggest advantage is that a donor turbocharger is not required, which saves lot of time and shipping fees.

I will see if there are room to dropping pricing on our current standard high flowing service. and will pass that to our customers.

2nlr2j5.jpg

Did a little bit on car this weekend, nearly finished, just had Matt from Nistune do computer and picked it up tonight, might

turn the key next weekend, just have to fab up external wastegate pipe., have all the pieces just have to cut and weld them

during the week

cheers

darren

Had Tao's car out at heathcote today and on slippery as hell tyres (255 RSR's) we managed consistent 124-126mph runs @ 19-20psi. (330-350rwkw)

60ft times were 2.4 to 2.6 seconds and ET was 13.02 - 13.3.

Time for some decent tyres and we will revisit heathcote. Axle tramp pretty much all the way to 4th and 3/4 track.

383127_10151321877396813_1603945276_n.jp

528274_10151321697551813_2088743261_n.jp

^^^

haha we submitted the post on the same time.

Just came back from Drags today. I can still taste rubber in my mouth.

This is the very first time my car's on the drag strip. It was some how of a test run. Trent was my driver for the day as he would know whats going on incase if any issues. It was a factory weighted R33, We did not do any weight deduction work to the car.

We've got 6 runs though out the day. Because observation of the car's performance is mostly on dyno, so we did run in to couple of issues. And the Federal RSR tyres are horribly bad for drag strips, no grip WOT in first, 2nd and 3rd.

The problem runs:

First run was 17.9sec with cooler piping popped.

I guess thats a NA R33's drag time. @ 75m/h

2nd run was 14.94 Hitting boost cuts. 78.1 m/H .

I install and trail 2~5 different combinations of turbos every week, but did not record the EBC settings for individual turbos.

3rd run was 13.92 @ 116.7 m/H.

This car came with a quick shifter, how ever it doesn't go into gears in high RPMs, this problem carried on to all runs done today.

4th Run was 13.66 @ 122.28 m/H.

Car had fuel surging issue

5th Run was 13.55 @ 118.17 m/H.

Car continuing to have fuel surging issues. It wants to stalling or bogs down after gear shift. After more fuel added (3/4 of tank full) this problem was finally solved.

The last two runs were mechanically trouble free apart from unable getting into gear and no tyre grip till 4th gear.

6th Run was 13.26 @ 125.63 m/H , 60ft 2.3 sec, @ 23psi of boost. (Add: After check data log it was 20psi instead of 23)

Because of the car had no traction, we finished the day with a lower boost setting and surprisingly it run faster with less m/h.

7th Run was 13.06 @ 121.42 m/H, 60ft 2.5 sec, @ 20psi of boost. (edit: After check data log it was 18psi instead of 20)

dragstrip.jpg

The turbocharger run today was a externally gated ATR43G3 in .82 turbine.

We should be hitting the strip again on 12th May. I will replace the gear shifter and Will be getting some proper MT tyres. Hopefully be hitting into the Mid 12sec with around 130m/h speed.

Decent mph to HP converter the guys linked me too today at the drags. They were using it on their 8 and 9 sec cars

http://www.wallaceracing.com/et-hp-mph.php

average r33 weighs 3060lbs

actual wet weights for GTR

R32 Skyline GT-R Specifications
GT-R GT-R Vspec
Weight 3262 lbs 3306 lbs


R33 Skyline GT-R Specifications
GT-R GT-R Vspec
Weight 3373 lbs 3395 lbs

R34 Skyline GT-R Specifications
GT-R GT-R Vspec
Weight 3388 lb 3432 lb

yeah should add all shifts were done 1 neutral 2nd then neutral then 3rd as shifter would not allow single action changes. so prob another few mph as each better change seemed to net a few more mph and better time. An honest 128mph run should be achievable on this little turbo.

tao i checked to log too at the end and all runs were closer to 20psi not 23 too. Last run was @ 18psi.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Nah, if I need to fit people in a car I'll just use the Mrs car, the MX5 is perfect for what I need as a fun little sports car for fun on the street As for getting in and out of the MX5, I have no issues as I am a short arse who does lots of mobility training 🥷 If anything, I have been looking at Daihatsu Hi-Jets for a work hack, I helped one of my mates move some stuff with one recently that he picked up from Just Jap, it was a little ripper and plenty big enough for what we needed, it would also be super handy for me as I do alot of gardening, and plan on having some veggie patches and native gardens in the place I buy next year when I retire I did alot landscape gardening and growing veggies prior to my current job, and loved it, and that is a hobby that can keep me sane in my retirement, and as such, the little 300kg load capacity would be more than enough for what I need it to move around I have been looking at utes for just this purpose for a while now, and a near new 2024 Hi-Jet can be had for under $30k And I would rather look at a quirky little Hi-Jet than pretty much any other little ute, well, apart from a Brumby, I love the little Brumby, and weirdly have never owned one yet I was going to buy a heap of raffle tickets to try and win the Brumby that MCM built for Subaru Australia, but sadly I totally missed the raffle, I even filled in some form to be told when the raffle started so I could buy tickets, but to my dismay I was never contacted and found out I missed it when I was randomly googling Brumbys last year... #conspiracy  Maybe I should just buy a Brumby for a little "work hack".....LOL I use to be indecisive, but now I'm not sure
    • Well.... it's not just "de-oxygenating". If you do that you just have, most likely, ethane. So you still need to do a synthesis step to combine a number of ethanes/ethanols to make circa-8-chain hydrocarbons. And of course you don't want straight chain HCs, because n-octane actually has a negative octane rating (ie, it's worse even than the n-heptane which sets the zero on the octane scale!), so you have to do some tricky catalytic chemistry to synthesise branched HCs. That's all doable - but it doesn't come for free. And.... it starts with ethanol, which is an agricultural product, and there will almost certainly never be enough of that as a base stock to replace the liquid fuels that are in use. You really wouldn't want to be planning to be using any more ethanol for fuels than is currently already used (in E10, E85s, etc). And ideally you'd be looking to reduce such usage, as it is largely wasteful, particularly in the stupid-ole'US-of-A where the corn lobby has organised it so that it's actually primary production corn that is used to make a lot of the ethanol, not by-products and waste, like it is (mostly) elsewhere. So, what I said about needing free-ish energy probably still applies. True synth fuels would be made from H2 and CO2, in a near reversal of the combustion process. In fact, given that the H2 would be split from water first, it actually is a complete reversal of the combustion process. But...energy intensive. The human race burns something like 1 cubic MILE of crude oil, after it has been made into various fuels. Every year. That's a simply stupendous amount of energy. Just assume that the density is 900 kg/m3, and that the calorific value is 45 MJ/kg, then that is 165.9 x10^12 MJ of energy. Or more than 10^19 Joules. You get a maximum of 1 kJ/s per square meter solar radiation falling on the planet's surface, and so if you halve that for daylight, and halve it again for average weather (highly optimistic) and then take ~25% for the very best efficiency of solar panels, then you need about 85.7 billion square metres of solar panels to generate enough electricity to replace that liquid fuel energy consumption. Each panel is about 1m2. That's a rather large number of panels. We also burn about a cubic mile of coal. We also use hydroelectric power. We also use nuclear. We also use a number of other sources, both "renewable" and not. You can kind of ignore the renewable ones (except for hydro, because it will all end up getting subsumed into pumped hydro for storing other renewables, and so it won't be the standalone renewable that it originally was), so we end up needing a multiple of the ground area number that I just arrived at.
    • Corvette thread then? Don't say I didn't predict the future again. "I love the little MX5, I do, but I just want something a little easier to get in/out of, a little more cushy and some power would be nice - I miss the V8 Rumble... I found this clean red C5 for sale recently and..." I'll do you a great deal on the next step, which is one of those but you can fit people in it, too.
    • What about renewable diesel and/or gasoline? I see some projects spinning up like de-oxygenating ethanol to make drop-in compatible bio-gasoline especially in CA. I still think the future is EVs and we should've all gone full throttle on nuclear power after the 1973 oil crisis like France. Despite 15 years of work in CA to reduce the CO2 intensity of generation with renewables our electric grid is still far worse than even "low carbon" nuclear power. ICE is pretty cool when you aren't depending on the stupid thing to be practical and reliable and cheap as possible to get you to work every day. It's kind of like mechanical watches or vacuum tube amps.
    • I just rolled over "my" first 10k km in the MX5 Every time I go anywhere it always ends up in a adventure to look at houses and find some random country roads I've been on leave since early November but unfortunately need to go back to work on 19 January Luckily though I still have a fair chunk of leave left to burn until.... Not that I'm counting 😁
×
×
  • Create New...