Jump to content
SAU Community

Recommended Posts

^ just rips some skids, if the car doesn't kick like a mad man when you're going sideways you know it's not a VLSD.. and before anyone goes "just shim it" man a real diff vs. a shimmed diff are light years apart :)

I've done the shimmed business, locked weldy crap, to a 1way and now a 2way.... a proper diff goes a long way!

So what are then lengths of the 1/2 injectors do they fit under the intake or still need to cut stuff, are they shorter then the xpurt 40mm ones?

Edited by boostn0199

So what are then lengths of the 1/2 injectors do they fit under the intake or still need to cut stuff, are they shorter then the xpurt 40mm ones?

The 1/2 length ones are the ones ARTZ used to do his top feed upgrade, from his photos he had loads of room without needing to grind down the plenum like the US kits I've seen which use full height top feeds.

I've emailed the site and waiting for a reply. I'm a little pissed off at the Five O Motorsport injectors, they've pissed me off since I've used them on my car whereas on a mate's car o had pretty good control over them.

I have never seen the Siemens copy EV14's. Good prices too, although the rail won't support the 3/4 length injectors like the Proflow/Aeroflow rails do. They look to be the same length as the 40mm Xspurts, (1/2 length.)

I would still recommend the ethanol rated injectors for anyone running e85.

...
Also note, don't ever buy used high flows.. I made that mistake, ended up with 1x dud and bought 2 brand new ones.... can't really blame the seller either, but hope he didn't sell me known dodgy ones because I would loose my shit if he did.

Or at least get them flow tested ;) Cheap insurance.

Or at least get them flow tested ;) Cheap insurance.

I did haha, backyard styles

Also swapped to my old rail, does have that rubber hose on the return.

post-22311-14045449815517_thumb.jpg

post-22311-14045450006042_thumb.jpg

Finish off my head install and turbo the atr28ss2 comes on fullboost about 4000rpm but has that large gtx turbo howl and mad slow vl echo dose

Book in for a tune this Thursday

My brothers s13 drives a lot nicer down low and more responsive maybe due to s15 motor and VCt but top end power is amazing

I did haha, backyard styles

Also swapped to my old rail, does have that rubber hose on the return.

What is the spray pattern on these like? like a hose I'm guessing?

What is the spray pattern on these like? like a hose I'm guessing?

Looks like a $2 reject shop water pistol LOL, at least they're "matched" hahaha

If anyone wants a rolling review/discussion(s) about Five O Motorsport 1000cc and 1200cc Side Feed Injectors go here:

http://nissansilvia.com/forums/index.php?showtopic=2441472

Talks about 98RON and E85, SR20DET and RB25DET usage and both 1000cc and 1200cc formats.

front.jpg

New Result sent in. This is from our TD06 SL20.5. Final result of 358rwkws @ 19psi. On an R33 Skyline unopened engine, 40mm external gate, fuel and ecu mods, E85 Fuel.

The same car had an Kando's TD06 SL2 20G before turbo change. This is an direct comparison between the two.

power.jpg

boost.jpg

Can you confirm there are no other changes between those two runs? And was the lower boost on the 20G due to not being able to flow it? It's quite a different power curve shape, good power etc however :)

Far as I know it was old turbo off, new turbo on. And every thing bolted back in place.

The 20G started to run out of puff around 5000RPMs as the boost curve started to decline. This is the latest version of of the SL20.5 also, with SS2 compressor wheel, It should crack 380rwkws towards 24psi.

Some updates. This is in reference to our CT15B 1JZ VVti high flow.

Quoted from: Eyebeclubin from JZX World:

Vehicle: JZX100 Chaser

Transmission: Manual - r154

Turbo: Hypergear CT15b High-Flow 3076r spec

Fuel: BP Ultimate 98ron

Supporting Mods:

- Power FC

- Denso 850cc Injectors

- Walbro 450lph pump e85 compatible

- HPI Dump pipe

- Tomei cams - intake 250deg, exhaust 260deg

- HKS EVC 5 Gold Edition

- Pod filter

Power & Torque Curves

Sad motor with Tomei M8280 Vs Hypergear High-Flow With happy Motor + Tomei Cams & BC Springs

Thin curve Tomei arms m8280

Thick curve Hypergear + Tomei Cams

Low Boost @ 15psi 250rhkw @ 6620rpm, 437Nm @ 3360rpm

High Boost @ 20psi 278rhkw @ 6463rpm, 510Nm @ 3495rpm

Tomeim8280VsHypergearhi-flow_zps114b65ba

BoostCurve_zps1fa27d91.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • If you are fine with China turbos, Maxpeedingrods makes a bolt on turbo. Ive had mine for two summers now and it seems to be holding up ok. 
    • Howdy all Im in a little predicament and wondering what everyone’s thoughts are? I’ve had my long block rebuilt and am in the market for a turbo due to my old one having metal shavings from crank bearings (cause of rebuild) go throughout the turbos oil lines and there wheel has a little play. I’m not really aiming for any power, just trying to keep it as oem as possible, but I can’t find a turbo that’s built for the stock ecu or find something that would be a standard replacement. Anyone have any ideas or suggestions 
    • How's everyone going? Just a shout-out introducing myself. I'm James, I live on the north side of Brisbane. I bought an R33 that had been left to rot in someone's front yard for 14 years. Apparently, it has immobiliser/fuel issues. Long story short, it's suffering from a seized engine, plus whatever else turns up once it runs. The car is pretty good considering it sat for so long. It pretty much died after being imported. It has a bunch of Jap parts and a full Top Secret body kit. It's painted Fiat Turchese Festival, or aqua blue if you're not French. Another project to throw money at!
    • So the clockspring is responsible for the indicators cancelling on their own? I thought that was the function of that white thing in the center (any idea what it's called?)
    • Can you log IAT? Whilst WTA coolers have their place, doing any sort of sustained run is not one of them There are fixes that slow down the heat soak, like ice boxes, which don't last that long, and interchillers, which are fairly expensive, up grades to the WTA cooling radiator, which may require a bigger pump, and upgrades to the reservoir size,  and upgrades to the cooling fans, but, it all still heat soaks, and takes ages to come down in hot weather  For a turbo, that isn't locked into WTA like my PD blower is, can you not possibly swap to a nice air to air intercooler????, it would be better for sustained runs then, and have alot less things that could go wrong in my opinion 
×
×
  • Create New...