Jump to content
SAU Community

Recommended Posts

Yes that would be the anti surge slots that are plug able if you don't like the sound or lag. usually be seeing 300RPM of differences in lag.

Congratulations to John Rico taking 1st in Sprint class of WTAC Rear wheel drive. Fastest lap of 1.41.44

19692309.jpg

19691583.jpg

310rwkws on Standard 21U high flow with high pressure actuator on E85 fuel 19psi.

12311648.jpg

19765146.jpg

  • Like 3

also keen to see how an ss2 made to sound like a t51r coming onto boost goes.. could consider getting it done to mine i could deal with the extra lag... man that things just pure ear porn!

you guys realize that a T51R sounds the way it does because....

well its a T51R and not an ss2

maybe tao can build you an exact replica and you can have gay as rainbow noises

  On 21/10/2014 at 7:35 PM, zebra said:

you guys realize that a T51R sounds the way it does because....

well its a T51R and not an ss2

maybe tao can build you an exact replica and you can have gay as rainbow noises

If you actually read my initial post my question was why does it sound the way it does. I asked as I thought that stao would know seeing as he builds turbos for a living.

Also it's beyond me how anyone can not love that sound haha. If I can use my SS2 (which I love) and also get it to sound more aggressive then what's the issue? As stao said I'm running an RB30 bottom end with what most people would consider and undersized turbo, and I don't really give a f**k about extra lag (within reason)

Please understand that different people enjoy different things and not everyone has to share your viewpoint

"that sound' is always going to sound bigger and better on a bigger and better turbo for sure.

The HKS 3037 Pro also makes that sound but in a less powerful way than the T51R because, well, it is a less powerful turbo.

If you get the surge slots in your turbo it will probably be like this. Decent and what you are after, but it is never going to have that 'end of days' sound like a T51R spooling up.

eg this vs this

3037 https://www.youtube.com/watch?v=PzN5uolGKII (0:24)

T51R https://www.youtube.com/watch?v=sU5YT2jqcmA (1:18)

  • Like 1

ct15bfronts.jpg


1000 CC Injectors
450 LPH E85 Fuel Pump
Hypergear CT15B high flowed turbocharger internally gated
Tuned on E85
Standard Automatic

309rwkws on 20psi
jzxauto300rwkw.jpg

Read more: http://www.jzx100.com/forum/topic/15403-about-high-flowed-ct15b-turbochargers-293rwkws-20psi-p98/page-12#ixzz3HjLIog9K

I'll try and find a video of my HKS GT2835KAI, it had a surge slotted front cover and whistled like crazy without ever going terribly fast. Would even whistle going around car parks. Sounded pretty cool, just a shame it never lived up to the old Pro S

The KAI had a removable 'snout' with the surge slots, I ended up getting another one made without the surge slots to see if it improved anything, think it may have improved torque slightly, noise was still there because the bolt holes for the snout were still in the front of the snout, had just lost the surge slots between them. Odd little turbo that one. They should have stuck with the Pro S

  • 2 weeks later...

Some photos of a pair of our high flowed Greedy T517Z in 10cm Rear for a GTR. Now fitted with our SL20.5 CHRAs and enlarged 36mm internal wastegate. They should be now good enough to reach 500rwkws+. Will update results once tuned.

2front.jpg

gate.jpg

rear.jpg

  • Like 1

SS15 is in 68mm. For those high flows, one of them would be good enough for 380rwkws on a Rb25det externally gated E85. They would be similar to having two TD06L2-20Gs with alot more power.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
    • Onto the android unit. You need to remove the top screen because there is a daughterboard to put inside the case. Each side vent pops out from clips; start at the bottom and carefully remove upwards (use a trim remover tool to avoid breaking anything). Then the lower screen and controls come out, 4 screws, a couple of clips (including 3 flimsy ones at the top) and 3 plugs on the rear. Then the upper screen, 4 screws and a bunch of plugs and she is out. From there, remove the mounting brackets (2 screws each), 4 screws on the rear, 2 screws top and bottom and 3 screws holding in the small plates on each side. When you remove the back cover (tight fit), watch out for the power cable for the fan, I removed it so I could put the back aside. The mainboard is held in by 1 screw in the middle, 1 aerial at the top and 3 ribbon cables. If you've ever done any laptop stuff the ribbon cables are OK to work with, just pop up the retainer and they slide out. If you are not familiar just grab a 12 year old from an iphone factory, they will know how it works The case should now look like this:
    • Switching the console was tricky. First there were 6 screws to remove, and also the little adapter loom and its screws had to come out. Also don't forget to remove the 2 screws holding the central locking receiver. Then there are 4 clips on either side....these were very tight in this case and needed careful persuading with a long flat screw driver....some force required but not enough to break them...this was probably the fiddliest part of the whole job. In my case I needed both the wiring loom and the central locking receiver module to swap across to the new one. That was it for the console, so "assembly is the reverse of disassembly"
    • But first....while I was there, I also swapped across the centre console box for the other style where the AV inputs don't intrude into the (very limited !) space.  Part# was 96926-4GA0A, 284H3-4GA0B, 284H3-4GA0A. (I've already swapped the top 12v socket for a USB bulkhead in this pic, it fit the hole without modification:) Comparison of the 2: Basically to do the console you need to remove the DS and PS side console trim (they slide up and back, held in by clips only) Then remove the back half of the console top trim with the cupholders, pops up, all clips again but be careful at the front as it is pretty flimsy. Then slide the shifter boot down, remove the spring clip, loose it forever somewhere in the car the pull the shift knob off. Remove the tiny plastic piece on DS near "P" and use something thin and long (most screwdrivers won't fit) to push down the interlock and put the shifter down in D for space. There is one screw at the front, then the shifter surround and ashtray lift up. There are 3 or 4 plugs underneath and it is off. Next is the rear cover of the centre console; you need to open the console lid, pop off the trim covering the lid hinge and undo the 2rd screw from the driver's side (the rest all need to come out later so you can do them all now and remove the lid) Then the rear cover unclips (6 clips), start at the top with a trim tool pulling backwards. Once it is off there are 2 screws facing rearwards to remove (need a short phillips for these) and you are done with the rear of the console. There are 4 plugs at the A/V box to unclip Then there are 2 screws at the front of the console, and 2 clips (pull up and back) and the console will come out.
×
×
  • Create New...