Hypergear Turbochargers and High flow Services Development thread

[hypergear]

More results to share, out of one of our OP6 high flowed turbocharger built in 2012 on an R32 GTS4 Skyline. Car made 324AWKWS on E85 fuel internally gated with factory exhaust manifold. Car has built engine, 256 Tomei cams and bolton supporting mods. Car tuned at Japanese motor sports SA.

 

Edited November 29, 2018 by hypergear

[LaurelPWR]

More update with an Billet CBB high flow that can be applied to both OP6 and 21U turbochargers.


I've currently using and its trailed on an R34 GTT that I have modified from scratch, parts and pricing ways Car has:
1. Injectorsonline ID 1000cc injectors + plugs : $750
2. Injectorsonline Walbro pump: $220
3. Korioautoparts Performance Radiator: $180
4. Z32 AFM with plug: $330
5. Nistune ECU plus tune from Chequered Tuning: $995
5. Split fire coil packs from Just Jap: $550
6. Spark plugs: $100
7: Exhaust flapper valve: $75
8: ATR43SS2 ball bearing turbocharger: $1850
9: Ebay intake pipe: $60
10： Trust front mount intercooler kit: $1650
Tuned at Chequrered tuning, Car's pulled 290rwkws at 20psi on pump 98 fuel. 


 
 

Will you do an E85 run also to compare?
Please please please [emoji4][emoji6]

[hypergear]

E85 would make 10% more power, I will be doing E85 later on once high mount setup is in.

[hypergear]

Further development in making a 300rwkws P98 high flow. This particular time run one of our prototype G4 profile. 

a quick note that I've mentioned before, do check your aftermarket 3 inches dump pipe before installation as most of them has a under sized flange cut out.

after Die-grinding

 

 

Car's back on the dyno:

Made 298.5rwkws with a intercooler restriction:

EBC gain resulted a boost pressure increase before cooler, not after.

 

Will be back again with a 600x300x100mm Aero flow cooler and see if that makes any changes. 

 

[Milkmun]

Hey Tao, any details on this eBay intake pipe of yours? Thanks

[hypergear]

There are few of them on ebay, I won't be specific on the seller. It requires modifications to fit but  works fine, photo of it: 

Edited December 15, 2018 by hypergear

[hypergear]

Hi Tech Round 5 video footage from Isaac Get, R33 GTST powered by one of our ATR43SS2 bolton turbochargers making 290rwkws. Tuneded by DVSJEZ.

 

 

[SeanR32GtSt]

Do you guys have a high flow G2 turbo for a rb20?

[GTSBoy]

13 minutes ago, SeanR32GtSt said:

Do you guys have a high flow G2 turbo for a rb20?

It's on this page

http://www.hypergearturbos.com/index.php?route=product/product&path=74&product_id=69&limit=100

380HP rating.

[SeanR32GtSt]

11 hours ago, GTSBoy said:

It's on this page

http://www.hypergearturbos.com/index.php?route=product/product&path=74&product_id=69&limit=100

380HP rating.

Without me shipping them my turbo.....?

[Kinkstaah]

If you contact Tao ask him if he can source a RB20 turbo for you (for the additional cost). He may give you a rebate when you return your turbo to him. He also may choose to not do those things.

I realise we are in a thread by him, about his products where he posted 3 posts ago, but send him a PM as he is very responsive to them.

[SeanR32GtSt]

8 minutes ago, Kinkstaah said:

If you contact Tao ask him if he can source a RB20 turbo for you (for the additional cost). He may give you a rebate when you return your turbo to him. He also may choose to not do those things.

I realise we are in a thread by him, about his products where he posted 3 posts ago, but send him a PM as he is very responsive to them.

It won’t let me private message him. I can’t call since I’m out of the country lol. 

[iruvyouskyrine]

Did you forget that i offered to buy a blown turbo for you here in AUS and send it to him to get done?

[SeanR32GtSt]

2 hours ago, iruvyouskyrine said:

Did you forget that i offered to buy a blown turbo for you here in AUS and send it to him to get done?

I must not have gotten the notification. My bad

[hypergear]

Just tick on the donor turbo option if you prefer to not send in a turbocharger for the high flow service. 

[Dose Pipe Sutututu]

Anyone want to buy my ATR45SAT 0.82 (external WG version) w/ Ball Bearing Centre, and v-band rear? I'll include intake pipe, pod, catch can, 3.5" dump/down pipe to suit a low mounted EWG setup. Turbo has literally seen less than 2000km and 1x skid pan day, will easily do over 400kW+

I'm selling as I'm going for a smaller setup.

[hardsteppa]

On ‎10‎/‎13‎/‎2010 at 12:10 AM, limpus said:

I'm tired too of pointing out such things...go ahead and claim whatever you want to claim...its up to SAU and your customers to decide...

Indeed, and decided they have. Hypergear is still here and going strong, and, looks like poster above is long gone. Man, been researching a lot of old posts, seems Tao has copped lot of undeserved flak in the past.

Been very happy with my HG hiflow, and now looking to the ATR43 range.

[Super Drager]

Have you made a T51R slot that sounds like this yet??

[hypergear]

Yes can be done. 

Dyno footage of ATR45SAT Powered R33 GTST, making a super responsive 339rwkws @ 22psi on pump 98 fuel.

 

Video footages from Vic-drift last week at Calder park. Car is an R33 GTST powered by one of our high flowed R33 Turbochargers, making 330rwkws on E85 fuel.

 

 

Edited February 26, 2019 by hypergear

[Super Drager]

How much is a T51R slot like that for an ATR45SS?

Edited February 28, 2019 by Super Drager