Jump to content
SAU Community

Recommended Posts

See you make a version of the g25-550 and. 660 aswell. Do you have any test of the smaller turbos on the rb25det for us that not hunt big power but whant a good responsive setup for a unopende engine? Looking for a good upgrade for my rb25 powered Datsun 260z. Whant something around the 350-400whp mark. And dont whant a high flow.

Best regards Stian 

5 hours ago, Genifx said:

See you make a version of the g25-550 and. 660 aswell. Do you have any test of the smaller turbos on the rb25det for us that not hunt big power but whant a good responsive setup for a unopende engine? Looking for a good upgrade for my rb25 powered Datsun 260z. Whant something around the 350-400whp mark. And dont whant a high flow.

Best regards Stian 

Hi I found G25 turbine is too small for a Rb25det motor. I recommend our ATR43SS-2 in T3 .71 turbine, its very similar to a G30-660 with better response. Its supplied as a brand new turbo internally wastgated.  

  • Thanks 1
5 hours ago, hypergear said:

Hi I found G25 turbine is too small for a Rb25det motor. I recommend our ATR43SS-2 in T3 .71 turbine, its very similar to a G30-660 with better response. Its supplied as a brand new turbo internally wastgated.  

How many kws can you see out of it?

Assume the application is for internal gate. 

Far as internal gate concern SS-2 makes around 300rwkws on P98 fuel in either .63 or .71 turbine housing. Response are about the same between the two. 

  • Like 1
22 minutes ago, hypergear said:

Assume the application is for internal gate. 

Far as internal gate concern SS-2 makes around 300rwkws on P98 fuel in either .63 or .71 turbine housing. Response are about the same between the two. 

 

Can you link me to the correct one on your site?

.71 P98 definitely hit 300kws without being to laggy?

Posted (edited)

Yes correct. Link is at:

https://hypergearturbos.com/product/atr43ssiwg/

SS2 Profile, T3 .71 Turbine housing, Ball bearing upgrade, and oil line kit. Thats pretty much it.

 

Edited by hypergear
  • Like 1
8 hours ago, hypergear said:

Yes correct. Link is at:

https://hypergearturbos.com/product/atr43ssiwg/

SS2 Profile, T3 .71 Turbine housing, Ball bearing upgrade, and oil line kit. Thats pretty much it.

 

Thank you. Was going for a Pulsar g25or30/660 but then i will look at this. 👍

Quick spool up and respons is the main thing in this can aswell as the sweet sound of the g-series turboes.

Hard time to find ppl using in the size cus every one that post dynos is almost only big power.

Dont know if i can manage to fit a new exhaust manifold this year or if i have to use the stock the first year.

  • 4 weeks later...
On 26/06/2024 at 11:36 PM, hypergear said:

Yes correct. Link is at:

https://hypergearturbos.com/product/atr43ssiwg/

SS2 Profile, T3 .71 Turbine housing, Ball bearing upgrade, and oil line kit. Thats pretty much it.

 

How much more power and lag does the ss3 make?

Posted (edited)

SS3 has very similar to a SS2. It needs to be externally gated for boost control. Performance wise about 60kws more in comparison.

Edited by hypergear
  • Thanks 1
10 hours ago, hypergear said:

SS3 has very similar to a SS2. It needs to be externally gated for boost control. Performance wise about 60kws more in comparison.

Thank you, damn want to stay internal. Just have to replace with forged pistons and rods now. So was going for a few more kws

  • 3 weeks later...
On 26/06/2024 at 11:36 PM, hypergear said:

Yes correct. Link is at:

https://hypergearturbos.com/product/atr43ssiwg/

SS2 Profile, T3 .71 Turbine housing, Ball bearing upgrade, and oil line kit. Thats pretty much it.

 

How much difference going internal to externally gated?

  • 3 weeks later...

ATR43SS-1 is better suited for a RB20det engine. SS-2 is suited for a Rb25det engine. Externally gated kit is highly recommended as it makes more power on less boost pressure with higher power ceiling. I've attached an example of our high flowed OP6 turbocharger running both internal and external gate.  Turbo is boosted to a point that no more power could be made. Car's an R33 with built Rb25det engine. 

op6powerall.jpg

op6boostall.jpg

The SS-2 made 317rwkws V 21U G3 high flowed made 282rwkws at a point that no more power could be made on a built RB25det Neo motor on P98 / Ron 93 fuel. 21U high flow is about 400RPM more responsive making 20psi by 3600RPM, while SS2 made 20psi by 3800RPM.  High flowed Rb25det turbo drives very similar to stock turbo.

My recommendation is still ATR43SS-2 in T3 .71 rear housing with ball bearing core, as it has stronger power delivery with higher power capacity. 

  • Thanks 1
  • 2 months later...

We've been working on all sort of different types of turbos with majority of work load shifting towards Euros in the last few years. The Skylines are more of a hobbie then a daily, at least its like that in Australia. I will update photos from some of our latest RB jobs. Whats recent is G30 turbine housing externally gated plumb back kit using T3 .83 geninue housing. It can be made to suit G35, G40 and G42 units. External gate optional. 

 

IMG20241114115712.jpg

IMG20241114115603.jpg

IMG20241114115614.jpg

IMG20241114115635.jpg

IMG20241114115653.jpg

Edited by hypergear
  • Like 3
40 minutes ago, hypergear said:

majority of work load shifting towards Euros in the last few years

That's great news

Skyline scene is a bit odd (yes I've been following that particular Facebook page), and most of the owners are young boys with no money.

On 8/24/2024 at 12:23 PM, hypergear said:

The SS-2 made 317rwkws V 21U G3 high flowed made 282rwkws at a point that no more power could be made on a built RB25det Neo motor on P98 / Ron 93 fuel. 21U high flow is about 400RPM more responsive making 20psi by 3600RPM, while SS2 made 20psi by 3800RPM.  High flowed Rb25det turbo drives very similar to stock turbo.

My recommendation is still ATR43SS-2 in T3 .71 rear housing with ball bearing core, as it has stronger power delivery with higher power capacity. 

I thought that the high flowed rb25det turbos were a lot more responsive than the stock one? Would that mean better low end torque?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • If you are fine with China turbos, Maxpeedingrods makes a bolt on turbo. Ive had mine for two summers now and it seems to be holding up ok. 
    • Howdy all Im in a little predicament and wondering what everyone’s thoughts are? I’ve had my long block rebuilt and am in the market for a turbo due to my old one having metal shavings from crank bearings (cause of rebuild) go throughout the turbos oil lines and there wheel has a little play. I’m not really aiming for any power, just trying to keep it as oem as possible, but I can’t find a turbo that’s built for the stock ecu or find something that would be a standard replacement. Anyone have any ideas or suggestions 
    • How's everyone going? Just a shout-out introducing myself. I'm James, I live on the north side of Brisbane. I bought an R33 that had been left to rot in someone's front yard for 14 years. Apparently, it has immobiliser/fuel issues. Long story short, it's suffering from a seized engine, plus whatever else turns up once it runs. The car is pretty good considering it sat for so long. It pretty much died after being imported. It has a bunch of Jap parts and a full Top Secret body kit. It's painted Fiat Turchese Festival, or aqua blue if you're not French. Another project to throw money at!
    • So the clockspring is responsible for the indicators cancelling on their own? I thought that was the function of that white thing in the center (any idea what it's called?)
    • Can you log IAT? Whilst WTA coolers have their place, doing any sort of sustained run is not one of them There are fixes that slow down the heat soak, like ice boxes, which don't last that long, and interchillers, which are fairly expensive, up grades to the WTA cooling radiator, which may require a bigger pump, and upgrades to the reservoir size,  and upgrades to the cooling fans, but, it all still heat soaks, and takes ages to come down in hot weather  For a turbo, that isn't locked into WTA like my PD blower is, can you not possibly swap to a nice air to air intercooler????, it would be better for sustained runs then, and have alot less things that could go wrong in my opinion 
×
×
  • Create New...