Jump to content
SAU Community

Dr30 Coilovers

R34

By R34,
in Classic & Vintage (1950's-1980's)

 Share

Recommended Posts

skybt1 Community Regular

skybt1

Posted
Posted

i had a guy make me up commodore shafts to fit the r30,

i dont know what went wrong but i broke three sets.

whether it was poor craftsmenship or just bad luck(i doubt it)

we just couldnt get them to work.

i just imported a couple of sets of dr30 shafts of an r200 from japan.

works 510 Experienced

works 510

Posted
Posted

depends,

gunna be chopping the struts up and giving them coilover sleeves?

i used commodore kyb excell g's in my last daily driver stanza, they were long as tho...

Z31 and R31 are short.

my bro runs ae92 trd yellows in the front of his 1600, shortened strut to suit. Its a sled

ydr030 Mentor

ydr030

Posted
Posted
i had a guy make me up commodore shafts to fit the r30,

i dont know what went wrong but i broke three sets.

whether it was poor craftsmenship or just bad luck(i doubt it)

we just couldnt get them to work.

i just imported a couple of sets of dr30 shafts of an r200 from japan.

shit, maybe not so strong after all. yea commondore bits on my d r doesnt sit well with me ne way, the local shaft guy wreckons he can rebuild em, but i doubt that, i have no idea were hed get parts ..

mmm do u want to sell 1 of your sets ?

skybt1 Community Regular

skybt1

Posted
Posted

not really, sorry. Knowing my luck as soon as i sell them ill need them.

Just hunt importmosnter. you'll find a set at a good price eventually.

Its a bit shit now with the exchange rate but if you have time its worth it.

They must have so many over there, you can get a set for 100 bucks some times.

I bought one brand new set for 200 bucks and one second hand set for 100.

But be careful, some of the japs try to pass off r180 shafts for 200's. There arent a lot like this but they are out there.

The more you look at the more you can pick which ones are good and which ones are useless.

  • 2 months later...
blue 32 Contributor

blue 32

Posted
Posted

so do s13 coilovers fit in the rear of an r30 4 door as long as you drill out the tops correctly is that right. im lookin into doining it on a mates. he put the stiffest springs he can find in it and it still sqats like crazy. its makin it a pig to slide.

  • 2 weeks later...
Matty T Collaborator

Matty T

Posted
Posted
so do s13 coilovers fit in the rear of an r30 4 door as long as you drill out the tops correctly is that right. im lookin into doining it on a mates. he put the stiffest springs he can find in it and it still sqats like crazy. its makin it a pig to slide.

I don't think your mate looked too hard, then. The factory spring rate was only about 90 lbs or so. You can buy a pair of King springs in the rate of your choice, and I'm talking about 1000+ lb.

S13 stuff isn't going to make it any better. You will still need an appropriate spring and dampers that are up to the task.

My rally car has 175 lb rear springs and Bilstein dampers. I'm in the process of getting softer springs because mine doesn't squat enough.

In answer to your question, I believe that is the case, yes. Though the coilovers are shorter, IIRC.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Zabuza
      Need AC Compressor for R32

      By Zabuza · Posted

      Ok glad you clarified on the frenchy’s options , I was worried about if my oem hoses would fit the new compressor or not if I just bought the bracket/compressor kit ,  didn’t realize they also sold a larger full conversion kit. Hmm may just go oem in that case then to make it easy only because I plan to sell this car to upgrade to a 32 GTR or 34 GTT.
    • sausagepianist
      V36 2008 Coupe Wiring Differences with Android Screen

      By sausagepianist · Posted

      Right, here's a video of the basic operation at least.  This is what you can expect day to day when you turn the car on and it boots from standby.  The only thing from a media point of view I haven't gotten working is for it to autoplay plexamp when it turns on from standby (it works from cold boot) but that's more of a plexamp problem as it will autoplay other music players.  Also attached is my one stray cable.  It's part of the screen's wiring adapters but there's just nowhere for it to go in my car.  I've just now done a bit of research and found a matching port on a 2010-2014 head unit with BOSE.  Mine has no BOSE so that's that case pretty much closed I think.  Plugging in the Infiniti AC panel basically did nothing for me, so that's a dead end as well.  Next port of call is to mess with this CANBUS module and see what I can find from it.  I found this resource containing the DBC files for a 2010+ G37 : https://github.com/icecube45/Dash_InfinitiG37/blob/master/InfinitiG37.dbc I'll now have something to go from when I try to extract my CANBUS data so I can see if the HVAC Mode, Fan Speed, Temperature, etc. match and also the gear shifter position.  It's a pretty big assumption that it's just mismatched CAN signals but considering all the devices in the CAN network are talking to each other (AC can be fully adjusted just with no info on screen) it might be a safe one.  I will report back WhatsApp Video 2025-02-26 at 12.49.10.mp4
    • sausagepianist
      V36 2008 Coupe Wiring Differences with Android Screen

      By sausagepianist · Posted

      Thanks for that Paul.  Do you think if I posted a picture you'd be able to remember where it went? 
    • sausagepianist
      V36 2008 Coupe Wiring Differences with Android Screen

      By sausagepianist · Posted

      Sorry Duncan, I didn't get a notification for the replies.  Thanks for responding!  It's a full Android device, but does allow you to use CarPlay/AA as well.  This is the one I bought from NaviRS on AliExpress: https://www.aliexpress.com/item/1005006368602668.html?spm=a2g0o.order_list.order_list_main.111.59aa1802JDzQ0E - the 2K 8G-256G CAM variant but it seems to have gone up by £170 since I bought it!  My purchase was ￡307.14.   It's not the fastest thing in the world but performs perfectly adequately.  It stays on standby unless I disconnect the battery and let it power down, then it's just a fairly standard Android bootup time from cold.  The DSP Equaliser is very nice and made the standard stereo system sound pretty decent compared to the stock screen.  Perhaps I can take a video of it when I get a sec. It *allegedly* supports the reverse camera, but I'm yet to get that working.  It has options for reverse cam (a camera unit can be bought separately) or 360 cameras (also bought separately).  To be fair it doesn't seem to detect that the shifter was put into reverse but I'm working on a theory about this as well.  At the moment I'm going without which is a bit annoying considering the car is an absolute canal barge but so far I haven't caused any damage I'll grab a picture of the wire I'm missing later today when I can get outside.  My theory, by the by, is that not only is the head unit different, but the CANBUS network has different signals for the different years.  I think this because I have a spare AC panel from a newer Infiniti G37 (as opposed to my Nissan panel) which wouldn't control anything except the volume when I had it wired up with the stock system.  I'm going to throw it back in and see if the screen will respond to it.  I've just ordered an arduino CANBUS module so I can have a look at the signals going around the car and see if I can spot anything.  I'm thinking if I can work out what it's expecting vs what it's getting I might be able to translate and relay the signal back but so far just a theory anyway. I also found this on my travels, so far the only one that specifically matches my car: https://www.aliexpress.com/item/1005002822934280.html?spm=a2g0s.imconversation.0.0.33433e5fgttovi If you look at the picture of the before, it has the card reader slot, and the picture of the head unit is exactly the same as the one pictured in my original post.  I asked if they sell the cables separately but sadly they won't.  I didn't want to just buy this one because it's a super old Android version and only dual core - likely slow as hell. 
    • sonicii
      V35 Overheat + Coolant Boil & Overflow + Engine not Starting

      By sonicii · Posted

      As above, you did refill the coolant and burp the system before running it again didn't you?
×
×
  • Create New...