Jump to content
SAU Community

Recommended Posts

Hi guys,

Just recently my remote central locking doesn't work. I have searched the topics here but not sure if any relate to my problem!

I find it difficult to lock and unlock the car (using the key fob). If I press it continuously... whether it be the lock/unlock or trunk, after a while (time varies time to time) it responds.

I am sure its not the battery in the key that is going flat....but is there something I can check in the car, fuse maybe? your help would be of great benefit.

Once, the car recognizes the signal and responds...it will unlock and lock without a problem...but if i leave it for a while, I'll be pressing the key like crazy again.

:)

Link to comment
https://www.sau.com.au/forums/topic/261943-remote-central-locking-help/
Share on other sites

Try changing the battery first before you say its not the battery..thats what my car was doing before and changed the battery ..then boom!.. happiest person alive, before other problems came up..

anyway good luck with that, if that doesnt solve it..could be more serious.. :)

Benny

I've had this problem twice from 2 different reasons.

1. Not sure what the exact problem was, but I assumed that the key fob was cold. I noticed that if i warmed it up by rubbing it a bit (for about a minute) then it will start working again. This might have been from a weak remote battery because after i changed it, it never happened again (or maybe because its hotter weather now :P ).

2. I had a dodgy stereo installed where the DVD-ROM Sat Nav used to be. It was a cheap chinese deck that malfuntioned and stayed on even when i turned the ignition off. I swapped it over to a JVC one and it started working again. I can only assume that this was due to the deck draining the car's battery. Maybe change the car's battery if you have so recently or check if anything is draining the battery while the car is off.

Hope this helps.

Benny

I've had this problem twice from 2 different reasons.

1. Not sure what the exact problem was, but I assumed that the key fob was cold. I noticed that if i warmed it up by rubbing it a bit (for about a minute) then it will start working again. This might have been from a weak remote battery because after i changed it, it never happened again (or maybe because its hotter weather now :down: ).

2. I had a dodgy stereo installed where the DVD-ROM Sat Nav used to be. It was a cheap chinese deck that malfuntioned and stayed on even when i turned the ignition off. I swapped it over to a JVC one and it started working again. I can only assume that this was due to the deck draining the car's battery. Maybe change the car's battery if you have so recently or check if anything is draining the battery while the car is off.

Hope this helps.

Point 1 is a no-brainer......def rem batt.

Point 2 is excellent, and from my experience, should be wholly considered!...(if any sort of power draw with keys out is present....cheap decks/aftermarket/bad wiring are potentially to blame)....a multimeter/current/amp meter placed in series to batt output is the simplest way to find out.!!...oh, and I found out!!

LoL thanks guys.

The reason i thought it wasnt the battery to begin with was that I had a new key made for the car and came with a 'new' battery. Coz the new key hadn't been programmed yet, i thought I might change the batt to see if it solved my problem...it didn't

So yeh...taking the next step which was to listen to you guys...I got myself a new battery...installed it....and it now works.

Thanks guys for making me wake up! :/

  • 1 month later...

i've got the same problem..

i changed my battery in my key, and still not working..

disconnected my car battery to start fresh,, and still nothing.. soo not sure whats next??

my alarm has been draining my battery a lot though? like after a couple of days of not starting, it had that dying sound...

atm i have the alarm fuse out, since then no drainage haha,,

any ideas? could it be something with the key? or something internally with the car,,, is there any way to check if the key is working or not?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I should note too as I have all 4 wheel speed inputs to the emtron I now have the emtron controlling the attessa solenoid for 4wd/traction and launch control strategies. 
    • It works quite well with the adjustibility within each of the programs of the turbolamik. Essentially p1 is drive and lockup comes on like a normal driver.  But in program 7 I have customised it to not request the lockup clutch to engage until something like 6500/7 when slip was the lowest. 
    • Yep, I like that. The tags are only on the first post of a thread and we don't get huge numbers of new threads. Also, I plan to add some more report types and we could have a member report type like 'review tags' then members could flag if they thought a topic wasn't tagged correctly.  No way man, I dig the input. Thanks! 
    • It's a valid thought. There's not exactly that functionality already (when creating a thread) - that's where the OP can use/create any tag they want. We'd have to come up with a way for the user to request their tags get reviewed or something. Otherwise the mods would have to review every new post's tags (for those that have them, anyway). There's kind of that functionality already exists to some extent, post facto of starting the thread, where the OP or any other user could report the post to admins, and request that tags get reviewed. We could do this already, and any user could already have made such a request. To make it a part of the forum proper, it would require an initial and an ongoing education programme, so that people know that it's a thing. OP based tagging/request for review would also require at least some (probably most) of the user base to be told that it's a thing they can do. Both of these things probably wouldn't spread too far and/or get used very much. If it was the standard approach on a lot of different sites, then it might do, because people would be used to it. Prank's approach to this differs from my original thought, by leaning into tagging. Which is fine - it's possibly better than what I originally suggested. In fact, I just went to the R32 GTR wiring diagram thread and added tags, including "Library". That's probably a good way to use tags and the idea of a library. We just have to drag together an (organised!) index of threads or posts that have that tag. I have yet to do any of my own follow up by pursuing worthy threads and posts and reporting/marking/tagging them for the library, such as the @Sydneykid stuff I was talking about, and possibly any amount of @Lithium 's and others' posts. At least if I tag them Library, we'll have a start.   Back to @Wazmond's idea as it relates to @PranK's, we might have some sort of a list of tags that are already used to scrape for this library. I'm not entirely sure how that would be presented or used, particularly if it got long. But it's yet another idea!   cheers
    • Just a thought, but instead of restricting, is it possible to do like an "up for review" kind of thing? Where say someone who's not an admin/mod tags, it would require approval for it to actually tag? User posts with a 'tag' > Admin/Mod Reviews > Approves tag > Tag now exists kinda thing? Just came across this thread so Im not too sure if Im straying off topic or not but forgive me if i am...
×
×
  • Create New...