Jump to content
SAU Community

Recommended Posts

Hi All,

We're currently having a sales promotion on Shift-I Shift Lights.

These shift lights are designed and built right here in Australia.

We're currently offerring free shipping on all models of the Shift-I Shift Light to any address in Australia. This free shipping promo will only run for a limited time, so order early to ensure you don't miss out on this free shipping special.

There are 4 models ...

large533.jpg

large534.jpg

Here's a photo of one installed ...

large773.jpg

WHAT ARE THE BENEFITS OF USING A SHIFT-I SHIFT LIGHT SYSTEM ?

With a Shift-I shift light system ...

- You decide exactly what revs the first light comes on at, and you decide what revs you want the Shift-I to flash the "change gear now" signal.

- As an example, you can set the Shift-I so that the first light comes on when at the bottom end of your optimal torque band, and the "change gear now" signal to activate at the top end of your optimal torque band ...

- This helps you keep your engine operating in the range where you have the most torque available, and helps you eliminate excess wear caused by needless over-revving after your peak torque has already been reached.

- It's super bright shift lights are seen in your peripheral vision, so you no longer need to keep one eye on your tacho and are free to concentrate on your lines, apexes, and braking points

- At night the Shift-I dims automatically to a night setting

- You get a smooth and consistent anticipation of your shift point

- It reduces driver workload and fatigue, both in sprint races and endurance events

- It provides drivers with reference points for performance

- You get immediate feedback on cornering entry and exit RPM

- You can achieve consistent staging RPM for standing starts & launches - so no more watching the tacho on the start line !

- In enduro events you can manage your fuel by short shifting at an indicated point below the peak RPM

- You can avoid the rev limiter and plan your gear selection

- You can improve your lap time consistency and get up to speed at new tracks and with new suspension setups faster

SOME FEEDBACK FROM SATISFIED SHIFT-I OWNERS

Nothing carries more credibility with us than unbiased testimonials from satisfied users of the products we sell.

Here are some examples of testimonials received from users of the Shift-I system ...

"Received and installed on the same day ... Pulsar N14 SSS. The product is excellent ... Well manufactured, engineered and packaged ... Recommended - buy Australian" - Phil, Brisbane, Australia

"I feel it is worth saying that the product is 1st class and your before and after service cannot be beat ... if you come up with new products I would be more than interested in having a look at them ... from a more than happy customer. Thank you very much" - Mark, Victoria, Australia

"If you are after a testimonial for the Shift-I, I can give you one. The Shift-I performed flawlessly and kept me in touch with the revs while the analogue tacho bounced all over the shop. This was at least partly responsible for me being able to shave 3 seconds off between first and last runs" - Paul, Aussie Frogs

"It’s worked brilliantly in my track car. I’m pretty sure I’ve gained maybe ½ a second a lap from it, not to mention the benefit over a longer stint due to a significant reduction in cockpit workload. Bloody good unit."

MORE INFO AND PRICING

You can view videos of the Shift-I here (including a video of one installed on a GT-R) ...

http://www.tunersgroup.com/Videos/Shift-I_...ght_Videos.html

There in an interactive online demo here ...

http://www.shift-i.org/main_mac_sep06.html

All models of the Shift-I Shift Light are priced at just AU$176 including delivery anywhere in Australia during this promo. As mentioned above, this free shipping promo will only run for a limited time, so order early to ensure you don't miss out on this free shipping special.

You can find full info about the Shift-I Shift Light System and order yours here ...

http://www.tunersgroup.com/Online_Store/Sh...ght_System.html

- Adam

Could you please show a pic of the installed unit on the R32?

Would like to see a side on shot to see exactly how it attaches to the column

Cheers

Hi N1GTR,

The Shift-I is very easy to mount on any virtually any vehicle.

large851.jpg

Above is a diagram showing the dimensions in mm of both the curved and straight versions of the Shift-I.

large852.jpg

Some fitments only need a simple bracket to position where desired - above is an example for information purposes only of a simple bracket used to mount a Shift-I, provided by the Shift-I's manufacturer.

You can also download a 1:1 scale cut out out which can be printed and used as a guide to assist in determining fitment.

Click on the following link to download the 1:1 Shift-I cut out ...

http://www.tunersgroup.com/files/pdf/ShiftICutoutsV1_02.pdf

We don't have a photo of it mounted in the R32, just the video of it in the R32 here ...

http://www.tunersgroup.com/Videos/Shift-I_...ght_Videos.html

- Adam

Hi all,

I just went to the newsagent here and issue 2 of Boost Magazine (formerly known as Zoom Magazine) is on the shelves.

It's the issue with an orange Torana on the cover.

On page 18 there is a half page article about our Shift-I Shift Light systems.

Click here for more info, more photos, demo movies and pricing ...

http://www.tunersgroup.com/Online_Store/Sh...ght_System.html

- Adam

  • 1 month later...
Hey Adam,

I placed my order tonight.

Can't wait to have a play with it.

Cheers

Simon

Good stuff Simon ! Post up some photos once you've got it installed.

Cheers,

Adam

Hi All,

large773.jpg

We've had some requests from people to keep the free shipping to Australian addresses special on the Shift-I shift lights going for a couple more days, so we've extended it until Sunday 10 May.

So if you want one and want to take advantage of the free shipping to Australian addresses special, you'll need to get your order in by Sunday night. Orders received after 9AM Sydney time on Monday 11 May will not be eligible for the free shipping special.

You can view videos of the Shift-I here (including a video of one installed on a GT-R) ...

http://www.tunersgroup.com/Videos/Shift-I_...ght_Videos.html

There in an interactive online demo here ...

http://www.shift-i.org/main_mac_sep06.html

All models of the Shift-I Shift Light are priced at just AU$176 including delivery anywhere in Australia during this promo. As mentioned above, this free shipping promo will only run for a limited time, so order early to ensure you don't miss out on this free shipping special.

You can find full info about the Shift-I Shift Light System and order yours here ...

http://www.tunersgroup.com/Online_Store/Sh...ght_System.html

- Adam

  • 2 weeks later...

Installed it today. Very easy to do.

Looks the goods.

Shift-i

Here's an intstall guide.

Install

Edited by Doobs


  • Similar Content

  • Latest Posts

    • It only looks tidy, as most of the stuff that was on the whole back wall, is now in the trailer to go to the tip, or has been shoved in my 2.2x2.4m "Spare parts room", and now I can't get to anything in there Ha ha ha I could definitely do with a bit more space, but I'd just end up with your problems I'm going to enclose the car port beside the garage, and move a lot of stuff into it I think. OR... It will be setup as a fabrication area, and the main garage will have parts storage in it. I'm not sure yet... Need some pictures of that big shed you've got with the bikes and Skyline in
    • No. I think it's gone. 😭 I think you can get body coloured ones on eBay so I think I'll get one of those... Or just hang a red ribbon from the hole and whack a TOW sticker next to it.
    • Can't say I've had a bad experience with one on my car, then again it only gets washed once or twice a year... The wheels on the other hand, get a good spray often due to my shitty dusty pads.
    • @MBS206 thats pretty neat and tidy to me!  I'll get a photo of mine when I'm out there next. It might require multiple photos to understand the scale of the atrocities though... In total I have 4 sheds of varying sizes and layouts. Main shed is 14x8, second shed is 3x8, third shed is 11x2.5, fourth shed is around 6x4.  All are pretty much full.   The main goal of my cleaning tsunami is to make the main shed predominantly car and motorbikes only. Second shed is my metal fab room (2 x bench grinders, drill press, bench belt sander, metal band saw, scrap metal storage and some of my garden tools.  3rd shed is more bigger garden stuff, storage for engine crane, jack stands, concrete grinder, concrete mixer, air compressor lives there, and it now has two 2mx2m pallet racking shelves with itemised boxes holding building stuff, electrical stuff, plumbing stuff, etc, etc.  The 4th shed is Ryobi electric ride on mower, mini boom sprayer, ancient Kubota tractor, more garden stuff!  I have got a lot of shit....  Then there's the pool house (8mx4m) and the pool pump shed (4mx4m).  I built all of the sheds over the 11 years we've been here.  The main shed was a Ranbuild kit, the rest are all custom made to fit the areas available. Building the main shed taught me a LOT as I had no idea about building anything prior to that!  I've still got one more in me. It will be my man cave which I poured the extra concrete for way back when I poured the concrete for the main shed. The idea is the Skyline will be a centre piece of the main cave once (if...) it's finished.  I told my now 14 year old son yesterday that I will 100% drive him to his year 10 formal in 2 years. Still a long way off but at least I now have a date to work towards! 🤣
    • Modern oils are amazing. Add tyres to that as well.
×
×
  • Create New...