Jump to content
SAU Community

Recommended Posts

Hay

I just had a dyno done to me car it is putting 183rwks i was advised by someone that i should upgrade the oil pump, he reckons that that kind of power i should upgrade i want to put a boost T on aswell to push it to 200rwks, is this true about the oil pump

cheers

Link to comment
https://www.sau.com.au/forums/topic/262212-oil-pump/
Share on other sites

I'm only pushing 170RWKW's in my RB20 and I just did a big end bearing up at wakefield due to oil starvation. In saying that I was bouncing of 7500 rev limiter (maybe not bouncing but it was a drift day) and had the car being thrown around fairly violently.

So unless you are belting your car side to side, and redlining it, you don't have much to worry about, But i would do it if you were building your motor :)

Link to comment
https://www.sau.com.au/forums/topic/262212-oil-pump/#findComment-4492452
Share on other sites

Yes - on the proviso you have done the rest of the mods.

183 rwkw in a GTS-t is very good so I suspect you have a few mods already. FMIC, Zorst, Turbs, Puter etc....If you want to push 200rwkws - safe not sorry. Spend now and save later. Would you risk an engine rebuild?

Link to comment
https://www.sau.com.au/forums/topic/262212-oil-pump/#findComment-4498352
Share on other sites

Its an 94 r33 gtst This is My first nissan skyline so i am not sure on what mods i need to do so it does not blow my engine and to get more power

Ok, as its your first skyline ill be very blunt;

-Changing oil pumps in a GTST is a waste of time with that power level, or if its working fine

-You will break the oil pump if you bounce off the redline time and time again

-Always warm up before using more than 30% throttle on cold start

-Always cool down (fit a turbo timer if you're a leadfoot)

-Before adding power, sort out suspension and a short shifter for the gearbox

-Once you've got it sorted suspension wise look for more power

Powerwise;

-FMIC (forum sponsors)

-EBC (forum sponsors)

-HKS GTRS kit (forum sponsors)

-ECU, ideally one that uses MAP vs TPS for mapping (forum sponsors)

-Quality exhaust including highflow cat, good dump pipe (forum sponsors)

:/

EDIT: If you need any further clarification, call a few workshops and get quotes for "just a new oil pump fitted" :laugh:

Link to comment
https://www.sau.com.au/forums/topic/262212-oil-pump/#findComment-4502476
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • https://www.dezeen.com/2025/01/06/nissan-electric-r32-skyline-gt-r-godzilla-sports-car/   I reckon this is pretty cool. Lots of other Resto mods have turned to ev power.
    • hahaha @joshuaho96 the most action it gets is when I have to drive from West to SE VIC to meet the fam. Even then, it;s on highway cruising speeds
    • don't know anyone in this thread, but i just found it, read the entire thing in a few hours, realized greg is still posting progress, and just have to say, this is awesome. it looks awesome. 100% right about the Uras kit making it a pain to get on hoists...have the same kit on my 34 and it takes six 2x4s and race ramps to do it without taking parts off. this reminds me exactly of this thread. https://grassrootsmotorsports.com/forum/build-projects-and-project-cars/r63-amg-the-unicorn-of-my-destruction/110824/page8/
    • The only way to make that better is to weld on some bozozoku tips up past window height and roll with the cool kids.
    • I'd want an even MORE side on view. More or less you want to make sure the outlet is actually square with the outermost part of the bumper. Or you end up getting soot all over your bumper from your hektik exhaust. In any case, it looks pretty close. I think the way to fix this is probably more of an overhaul at an exhaust specialty shop if you want tips that are rounded off or sit nicely with the bumper but have proper clearance and don't move - Probably more of a redesign than a quick fix. I've pencilled in my own exhaust with its own various problems, pinholes, PITA fitment, and other issues and can see myself going to a shop and saying "JUST DO THIS BUT BETTER?"  Which is gonna work better than any more small fixes. I'm gonna chime in here officially with "from an outsider perspective this exhaust looks fine so this is self OCD probably" (which I also suffer from)
×
×
  • Create New...