Jump to content
SAU Community

Recommended Posts

Hi guy's, I'm in a pickle of a situation, lost ma job a month and a bit ago which meant the company car had to be given back. Not so bad because I've got a new job and its going well, problem is my wife needs her car. The skyline even if I finish it isn't the type of car you want to escort clients around in.

So I want to know how much I could get for the skyline and see if I can get something else, doubt I'll sell it because I've put way too many hours into it to part with it for just a normal car. Still I need to know what my options are.

Fair simple build up,

R32 Gts-t 1989 type-M

RB30det engine

Rb26 head

Aries pistons

H beam rods

T04z turbo

PFC djetro

800cc injectors

cam gears

R33 manual gearbox

exceedy 4 puk clutch

2 way kaaz diff

R33 GTR v-spec front disc's and caliper bracket

18x10 +20 rear's VSKF's

18x 9 +20 fronts VSKF's

Couple gauges, AVC-R boost ctrl

HSD coilovers

caster arms

shortened frnt upper control arms

FMIC, oil cooled, alloy rad, twin pod intake

Rear has had guards stretched professionally

25mm front gaurds

Cobra-daytona 2 reclining buckets (both seats)

hydrolic handbrake

driver side harness.

Paint is crap, half stock half matte from where body has been repaired. Fair straight no major dents. Has been drifted but this engine has only been on the dyno and due to an electrical problem hasn't had the tune finished. At the moment it cant be driven but I'm sure I could fix it I just don't have the time as its locked away elsewhere due to the lack of car parking at my place. Not registered but it can be.

Thanks guy's.

(If you don't know, don't make up crap)

Edited by =premo=

the markets shagged at the moment, so unless u wanna sell it for way less than what u should i'd keep it.

I can't even get 18k for my 251kw @ 12psi RB30DET powered R32 and she's running, registered and in excellent condition.

the markets shagged at the moment, so unless u wanna sell it for way less than what u should i'd keep it.

I can't even get 18k for my 251kw @ 12psi RB30DET powered R32 and she's running, registered and in excellent condition.

$18k, Whats the running gear on the RB30? I remember seeing your car at Aldgate a long time ago and it looked brand new.

I'm probably looking around 300kw's+ from this setup once re-tuned but your car has way more class and with the market being so crap $15-16k would be about right I suppose. Not worth selling it in my eye's. I don't want to sell it in the first place, especially seeing I haven't even played with any of the new bits yet but I cant see a way out of it. Could try to swap it but I doubt anyone would have something that suits what I need and is value enough for me to give up my pride and joy.

I'm getting a headache, this really sucks.

to cut it short mate, keep it and finish it off over time. you'll never be happy with what you can get. id say between 15-18 once its running and rego'd.

you can pick up commo's or ex government cars at the auctions for stuff all. i recommend doing to that to have a nice 'cheaper' daily that would be good for moving clients around in if your wanting to keep the skyline.

What about selling just the engine?

I'd think the Trust manifold, waste gate, twin pod intake and T04z would fetch at least $3000 on it's own.

The head has been ported and everything machined at Lewis Engines...

if you throw in the gearbox set up and the complete engine and turbo setup id say around 8-9k and that's if you can find someone willing to buy it.

everyone's a bunch of tight asses these days!

Edited by Import S13

I think you'll have a lot of trouble selling it not finished at a good price

have a look at Carl's 4 door http://www.nissansilvia.com/forums/index.p...howtopic=325747 his car is mint as and has been for sale for ages.

Edited by DSTROY

Fk me Carl's four door is neat as. Think I've seen it down near the truck lineup at the docks before. I really want to keep it but the more I talk it over with the wife the more I realize it needs to go. I'm going insane trying to figure out a way to keep ma car.

the markets shagged at the moment, so unless u wanna sell it for way less than what u should i'd keep it.

I can't even get 18k for my 251kw @ 12psi RB30DET powered R32 and she's running, registered and in excellent condition.

Yeah, nobody is buying anything. I've had my toys up for a while now.

Considering your isn't registered, engineered, finished, or even with a suitable finish, you won't get much. :(

everyone's a bunch of tight asses these days!

Tell me about it. Had some the sphincter of the universe reckon he could get a stag like mine for under $10K ... good luck with that dreamer!

Yeah, nobody is buying anything. I've had my toys up for a while now.

Salesman told me some months ago when this financial crisis hit that it's getting harder to get car loans from a bank but they were still able to organize finance for buyers through the yard. The yard which shall remain anon. looked to sell POS only however....

Yeah, nobody is buying anything. I've had my toys up for a while now.

Considering your isn't registered, engineered, finished, or even with a suitable finish, you won't get much. :P

Tell me about it. Had some the sphincter of the universe reckon he could get a stag like mine for under $10K ... good luck with that dreamer!

Sent PM about stagea's

stripping it for parts is the ONLY way to get any decent coin back.

i have recently stripped the muppet bus "r33sedan" and sold off all the goodies.

had a build 25, high mount etc, so far i have recouped $12.5k from parts and i still have nismo injectors etc left.

i can then bolt a standard engine in the car and sell that for 8-10k.

which in the current climate is easily achievable, but it does require you stripping your pride and joy.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Damn it, I was at work last night, and stayed in a room there during the storm with the car outside, but undercover, I just went downstairs and well....there was a large steel locker that has come from some place last night, it wasn't anywhere I could see yesterday, and yeap, it landed on the fraking car....of course it did..... LOL So, I'll need to take it back for paint and panel, luckily it was only the boot that took the hit, so it could have been worse Serves me right for staying at work and getting on the cans with some of the boys
    • Yeah, really happy with how it all turned out As for aftermarket lip, nah, I'm not really a fan for practically reasons on a street car that gets driven everywhere  I did have the full lower kit on my 2015 STI, but found the front lip scrapped alot, even at stock 4x4ish ride height As the NC sits now, with the lowest point of the car at 110mm, so just legal, some steep driveways and steep speed humps will still "just" scrap those little plastic OEM air dam thingies on the undertray just before the front wheels
    • Here's one I help build and tuned a decade ago, Garrett  GTX3071R Gen 1, T3 twin scroll 0.83 rear housing. Went from larger 272 cams down to smaller Tomei Poncams to help with the low end. S13 non VCT motor. Car was purpose built for the track, hence low down was the focus. Note the actual dyno chart shows lower boost, however the EBC and boost gauge showed 1.9Bar (Ignore the torque, I was young and didn't know how to set derived torque)  
    • I’m doing some side developments on SR20det S13 engines, its one my hobby cars used it to compare flow capacity of some smaller size wheels. SR20det is one of another JDM legendary engines I'm sure there are plenty of SR enthusiasts on this forum, I will share results some common turbo configurations here. a quick run down of what the car is: Wide body 180sx Type X with black top engine (blue). It has: Stock bottom end Haltech 1500 ECU 5-0 motorsports trigger kit Kelford SR20DET Beehive Spring with Titanium Retainers Kelford Cams SR20DET S13 188-B 268/272 Cams G25-660 Turbocharger in T2 .64 rear housing internally gated ARP Head studs MLS head gasket 1000CC ID injectors Walbro 450L Fuel pump Front mount cooler kit JJR’s 3 inches turbo back exhaust (its too short for the 180sx it had to be extended) Pump 98 fuel Hub Dyno tune So far made 270rwkws at 22psi full boost by 4500RPM. Engine is very knock limited hence a pretty bad looking top end. From previous experiences it seems like SR20dets are happier with bigger size turbine, some thing like a GT30 would make way better top end, but on same time response is lost. It won't be a problem with S15 VCT engines. I'll be testing alternative turbine housing, turbine wheel and possibly dump pipe options for extra flow to resolve the problem and of course E85 would resolve all the issues.            
    • Awesome writeup and details. Thanks for sharing the story so far. I can relate to parts of it with my previous car and some of the issues I had to deal with.
×
×
  • Create New...