Jump to content
SAU Community

Recommended Posts

my colleague was the R&D lab boss at BHP Bluescope for 10+ years, about 15 years ago.

his house was one of the first full steel frame houses built (25+ years ago), on a concrete slab - using experimental steels at the time.

it's still solid as a rock. thing is, when you want to knock out a wall, it's a bit more of a challenge.

needless to say, he is a mega-old bloke!

So what's the deal with extending a timber frame house? Can the extensions use steel? Will be looking at extending my house in the future and pretty sure it's currently timber, but not sure the new rules will allow timeber where I am...

and deforestation :P

One is a renewable resource, the other isn't..they don't use old growth hardwood to build house frames. Zazing.

Steel frame homes have been built for many years and have 2 major detractions.

In a house fire, even an isolated kitcken fire the odds of frame damage buckling ect are high which in turn adds to repair costs (if repairs are posible). Have the tensile properties of the steel and structural integrity of the frame changed after fire exposure? probably.

Underpinning and/or restumping, eventually all homes need this kind of work, Timber framing will flex and twist where needed.

A steel frame will also do this to a certain degree before buckling or breaking load points.

City dwellings, yeah...Country stuff no way

One is a renewable resource, the other isn't..they don't use old growth hardwood to build house frames. Zazing.

Steel frame homes have been built for many years and have 2 major detractions.

In a house fire, even an isolated kitcken fire the odds of frame damage buckling ect are high which in turn adds to repair costs (if repairs are posible). Have the tensile properties of the steel and structural integrity of the frame changed after fire exposure? probably.

Underpinning and/or restumping, eventually all homes need this kind of work, Timber framing will flex and twist where needed.

A steel frame will also do this to a certain degree before buckling or breaking load points.

City dwellings, yeah...Country stuff no way

Seriously, if the frame of a house gets hot enough to permanently change its composition then there is going to be so little left of the house its not worth worrying about. One of the great strengths of carbon steels is their ability to deal with changes in temperature without undue expansion/contraction or without losing significant strength. You cannot say that of materials such as stainless steel, aluminium or even wood.

Also buckling is far more a property of design than of materials. As is stiffness. Do not confuse stiffness with strength. They are two different proerties.

As you say timber frames will flex & twist where needed. They will also sag, twist, flex & rot where not needed.

Wood is a great material for making trees. Any other use is marginal.

MadBung.

In a house fire, a steel frame doesn't contribute to a fire. White pine (what the majority of houses are made from these days) ignites at 250-280 degrees, after this point the fire spreads through the walls, into the roof cavity and there goes your house, especially if the trusses are built using gang nails, which again, all are.

The steel doesn't buckle or move until way above the temperature at which timber ignites.

When underpinning a house, you have to remember that steel weights around 1/3 of the same frame in timber, hence there is much less load on the joists and bearers, hence much less worry about.

And in regards to city vs country..... the % of houses in country area's in steel compared to city is MUCH higher.

Steel often has a slightly higher cost for the frame itself, as it's almost always pre-fabricated, although the following trades should take less time to fit out as all the services holes should be in the right place for them, and you also wont need to straighten any walls, get the planer out or fix any warped timber frames.

Who is doing your building? DEMAND Steel!

Timber converts a lot of Cardon Di-Oxide to Oxygen during it's grow process, and then releases all that carbon back into the atmosphere as it degrades over the next 50 years.

i wouldnt say that the timber releases all of the carbon back into the atmosphere over 50 years, maybe thousands of years, known as the carbon cycle, as wood, in this case timber, acts as a carbon sink. It does this through photosynthesis, converting carbon into oxygen, removing the carbon bonds from carbon dioxide resulting in singular carbon atoms present in glucose C6H12O6 and releases whats left, the oxygen, but not all of it, as the rest of the oxygen is used in respiration during periods of no sunlight, eg night time, and most of the carbon is stored.

But then again, if the whole earth was covered into dense forests of wood, and i mean every continent, there still wouldnt be enough wood to drain out all of the carbon in carbon dioxide we produce annually. (We tested and measured this hypothesis in Uni) so in response, i vote steel framing

Spelling :wacho:

hope ive stated correctly, covered bout 3 years ago, correct if wrong

Edited by BIGGERDave
Ryan... ...Hope you got the vid... ...I also hope it was the right one...

Sorry it's taken me so long to send... ...I've been having connection problems...

got it, thanks for that, i was expecting some new kind of crazy cancer but it was just douche's who don't know how too manage their usage haha, Thanks again!

  • 2 months later...

I'll be rebuilding my house that burnt down in the black Saturday fires using steel frames. I'm trying to reduce the amount of timber used in the construction of the whole house to reduce the fire risk as well as the damage caused by the termites, as the house is in the highest risk area for them in the state.

Who is doing your building? DEMAND Steel!

Haha, someone is worried about thier falling bhp and bluescope shares :)

nah, steel is good... makes life a bit easier on us sparkies as it already has holes cut in it for our cables, but not easy to clip to lol

my parents had a steel framed house on concrete slab in Hervey Bay Qld in the early 90s where summer temps were very hot and I do not recall any expansion noises whenever I was visiting - this type of construction was getting very popular in country areas - and termites which proliferate in northern hotter climates are not a problem compared to timber construction .............why has this thread appeared now? ..........someone doing a free advertorial for Bluescope?

Steel frame homes have been built for many years and have 2 major detractions.

In a house fire, even an isolated kitcken fire the odds of frame damage buckling ect are high which in turn adds to repair costs (if repairs are posible). Have the tensile properties of the steel and structural integrity of the frame changed after fire exposure? probably.

Underpinning and/or restumping, eventually all homes need this kind of work, Timber framing will flex and twist where needed.

A steel frame will also do this to a certain degree before buckling or breaking load points.

City dwellings, yeah...Country stuff no way

Madbung, you're right in that damage to the steel frame in a fire adds to repair costs, but you're wrong at the same time (if that makes sense). Yes it costs more to replace due to higher material costs (but they're only slightly higher as steel frames have taken off, the unit costs have dropped dramatically such that they are almost comparable with timber frame) but the temperatures with which steel starts to lose structural integrity are around 900-1500 degrees, by which stage your house is already beyond saving. And if you're really paranoid about fire damaging the structure there's treatments available which slow the rate of fire damage (it's called vermiculite, and insulates steel from fire. Usually used on larger buildings, but i don't see why you couldn't use it at home.)

And buildings are designed such that they are overstrengthened - lose a member and the whole thing won't collapse, so it's simple to replace a few.

(Civil Engineer FTW)

I was with a few mates a couple of weeks ago (both builders) and they were arguing this very argument. Crux of it was, with experienced guys, you can build in steel in a few days what takes a month in timber. Which equates to far less cost in labour, so $$$ back in pocket.

Clutch.

Sorry mate but you are clearly uneducated and ill informed about this.

Steel Houses DO NOT CREAK. This has been proven bu the CSIRO and was found to be no more than a myth perpetrated by the timber to protect market share.

Steel is recycleable. Timber is not. Of ALL the steel possible to be recycled in Australia, 80% is, and of that 80%, 95% is actually recycled and turned into new steel. We dig the iron ore up once, turn it into steel once, and then re-use if for the next 100,000 years.

Timber converts a lot of Cardon Di-Oxide to Oxygen during it's grow process, and then releases all that carbon back into the atmosphere as it degrades over the next 50 years. AVerage life span of a galvanised steel house frame..... 800 years. As proven in accelerated scientific tests.

To protect timber from Termites and/or Rot you need to treat it with harsh chemicals, how knows what they are doing to people..... Remember Asbestos?

RBPOWA, The blue coating on the "TrueCore" material is simply a blue ink/tint in the final Chromate layer. It's simply a branding exercise, and that steel (Bluescope's ZincAlume) is not actually 100% correct for use in Steel Framing, normal Z275 Gal is better, as you don't need to use a membrane underneath the steel on concrete slabs. Having said that though, in the vast majority of cases, it's no problem to do this.

And you got those stats where? As for termites, why uses asbestos when treated pine does a fine job.

I was with a few mates a couple of weeks ago (both builders) and they were arguing this very argument. Crux of it was, with experienced guys, you can build in steel in a few days what takes a month in timber. Which equates to far less cost in labour, so $$$ back in pocket.

Both steel and timber frames come prefab so I don't see how either one would take significantly longer.

The only real advantage a galvanized frame has over timber is an issue of termites, where as it costs more.

And you got those stats where? As for termites, why uses asbestos when treated pine does a fine job.

Of feeding the termites....

My house that burnt down, had had a whole corner of the house eaten out by termites, and that was with treatments being done every two years, and the frame being made from treated pine.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I believe there was a similar one posted by @duggyphresh. They were re-routing their battery positive cable in the way I am also trying to achieve. Sorry, I’m new to this forum, so was a bit late to the party by a few months and so reignited the old thread, as I wanted to know how they got on with doing it.
    • Wasn't there a thread on this very subject just a few weeks ago?
    • Hi all! Looking to relocate the battery to the trunk of an R34 GTT. I want to do it using as many stock GTR components as I can (including the harness protectors from the 34 GTR that run underneath along the chassis to the engine bay). So far I’ve purchased the battery tray from a 33 GTR, as the captive weld nuts are already there just asking to be used. There is also the slight issue of now having to relocate the ABS/TC/Fuel Pump Control ECU, which in GTT’s sits right above where the battery will then sit on the tray. Has anyone already achieved this, and if you have any pics that you wouldn’t mind sharing? It would be great to see how others have done it and where you put them, as there are countless holes in the parcel shelf panel to potentially use. Just trying to get some ideas bounced around, and to help uncover any potential problems I may encounter by  my choice of location. TIA for any help!
    • Brand was ard.   I also threw a brand new battery at it and beefed up the wire from the alternator to battery and added an extra earthing point from the battery 
    • Evening all,       I'm replacing some bolts on my RB25 with probolt Australia bolts.       Does anyone know the following, m5 m6 etc 10mm 20mm etc       Coil cover   Cam covers   Plazamaman fuel rail   Front cover (timing cover)   Etc   Any help would be awesome   Or any lists anywhere
×
×
  • Create New...