Rb25det Head Vct Feed

[joe blo]

hi mates. what is the fitting called that you tap into the front of the head to feed the vct? like what size and numbers and stuff?

also what do i use for the bit where it tees into the oil pressure sender. what size and name is it called?

also is EVERYONE using a drain at the back of the head? il be using it mainly for treet but will be drifing it and drag track sometimes. do i really need to spend the $250 for one off spool imports or can i not use one and be ok? can you show some pics of ones if you made one and didnt use the spool drain kit. and include the name of the parts if you know them.

will the heat resistant rubber or silicone or whatever hose it is be safe forever? is it easy to not have it close to the manifold or exhaust or anything that will melt it? i just dont wanna spend 250 bux for it to melt if it cant easily be put out of melting range

[fletch rb30]

oil supply fittings 1/8 npt

[bubba]

Are you using an aftermarket oil pump? then yes for the oil return.

I'd probably even run one with a stock pump.

I didn't run one to start with and sustained high rpm (5-6k+) while doing burnouts or drifting or tracking, fills the catchcan pretty damn quickly.

I'm using an N1 pump with no restrictors though, restrictors and oil drain going in very shortly.

[MBS206]

Run a braided line. It goes down under the turbo... Very hot down there...