Help Please With Engine Issue

[foney]

Long story short, timing belt snaped, was hoping for no damage to engine, replaced the belt and the car didnt kick over correctly and a loude ticking noise was present.

I had a mate do a compression test and No1 and 3 cylinders came up with no compression at all, i just want to confirm that there is possibly bent valves in the head or incorrectly timed.

Thanks for the help in advance

Brentin

[Craved]

yep, they are a compliance head - you will have damaged valves as a minimum

[foney]

thanks mate,

Another quick question. do u have to remove the engine to take the head off..

Cheers.

Edited March 26, 2009 by foney

[GTRsean]

It's easier to work on the engine with the engine out, especially when pulling off the intake manifold etc.

But if you have to it can be done with the engine installed.

[foney]

thanks mate :-)

[GTR-32U]

Well if it was me I would pull the whole engine out regardless. Who knows what Piston damage you may have sustained with valves crashing into piston tops

[foney]

this is true, thanks for the help mate.