Jump to content
SAU Community

Recommended Posts

Hello there,

Finally booked my license in and am now looking for bikes to purchase! Most first bike buyers ask, should i get a cbr250rr or a zx2r? But I am asking more should I get a zx2r, cbr250rr or something more commuter like zzr or gpx or gs. The reason i ask is because of the pros and cons.

sports bike

Pros

Looks "cool"

performance (i wouldnt know because i havent tried)

Cons

Higher cost then commuter

generally higher k's for $buck$

older model for price

cost more

Commuter

Pros

Almost looks as cool as the sports bike

lower K's

newer model

cheaper

Cons

Not as hardcore looking as the sports bike

performance (once again, i wouldnt know)

Is saying all this, as from what ive read. i would get over this bike in a year etc and sell it... the commuter would proberly in better condition for selling. I must mention i have no idea, im just going off what i think and what ive read around. When i first got my line i used to give it a bit of gas for the rush but now i never do... im happy to just granny around... im guessing that will also be the same for the bike... i will get it some gas then get over it and granny it around. which in the end the commuter would be better.

I should mention what i would use it for. I would take it to work when its good conditions and i dont have to take anything (only 15min drive). i guess at least twice a week. and for weekends if not raining would be my primary transport.

Hopefully i explained myself well, and look forward to your opinions!

hehe u never get over the thrill of bike riding! My first bike has been the vtr250 very good bike. The car will also be hard to go back to ....it just feels so slow. Check out the forum netrider for some comments / threads on bikes.

My first bike was a Cagiva Mito, a sports bike. Bucket loads of fun through winding roads but not so ideal for commuting because of the agressive riding position (knees up next to your chest and hugging the fuel tank) Decide what you want to use your bike for and buy accordingly

Edited by MintR33

yeh it depends what you want it for.. for a good all round bike... you cant go past the vtr 250's.. if you want something a bit bigger.. a hyosung 650 is pretty good looking bike... and good for large riders..

for the ultimate thrill though... get an aprilia RS125... same story as cagiva mito.. sooo much fun. and quick little buggers. but hard to ride in traffic due to riding position.. light weight.. thirsty.. noisy.. smokey.. and nothing below 6000rpm... but it makes up for it in sheer thrills.

if you are doing lots of traffic on it... get a big dirt bike... like a 400+ WR, and motard it... the massive torque will punch you through gaps in traffic before the gap even opens up... and the riding position is more upright and you can see for miles.. with smaller road wheels and good tyres.. it will out handle many sports bikes and will be alot of fun.

well i'm not a 'rider' but i have riden, and looking at it as a future prospect. my mates got a 2008 zx2r (the 250 ninja, i think its zx2r) and, it really wasnt that impressive. so i wouldnt go buying a sports bike for its 'performance'. that said i dont have a lid so wasnt going too hard, and imma big fat c*nt too.... still nothing special

i was personally looking at the 650 hyosungs. should have a much more firendly torque curve, are legal on your L's, there is a verys imple mod to the carby to crank it up (its been choked back to be L plate legal) and with an aftermarket exhaust, that vtwin rumble is cream worthy

personally myself i would recommend the new 250 ninja.

cheap to buy, run, insure, while still looking sporty and fun to ride.

i nearly bought one before the 33. still contemplating getting one as a daily.

Also whats everyones opinions of how many K's become too high...? and you dont have to say there is no too high K's if you look after it. Im just guessing i want to look below 30,000 k's?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • GTSBoy on your suggestion on another thread I had a look at those injectors and ended up getting them because of the quality.  Got the expensive ones.  
    • Hey guys been looking everywhere to try and find the correct gtr hood latch support part number but only found the first half and when I search with that number it sends me to an r34. The first part I found was 62515. If anyone could help me with the rest then I’d really appreciate it. Or if there’s some alternative hood latch support that would work even better cause I can’t find any for sale. (Searched on upgarage, partsouq,buyee,rhdjapan) 
    • If you've only done the upper control arms on the rear, AND you have changed their length (by more than about 1mm) to set the camber you want, then you will definitely need/want to install traction arms also. Adjusting the camber arms on their own WILL introduce bump steer and make the car unpleasant to drive. Most owners have no idea that their car could behave infinitely better than what they put up with. I'm not entirely sure what the Stageas need, but I am thinking that unless you have massive front spring rates and pretty soft rear springs, you have waaaay too much rear bar. Oversteer city, in my estimation. Combined with possible excessive bump steer from maladjusted arms, that could be a recipe for nastiness. ATR43SS2 is not a highflow. It is an outright replacement turbo. It's a little bit bigger than the largest highflow profile that Tao does. Probably a solid 300rwkW turbo where the bigger highflows will be about 30-40rwkW less. Nevertheless, we're only talking about ~300 rwkW, which is well within the abilities of the stock ECu to run with a Nistune on board. I would do so without hesitation - and I will be doing so when I get my finger out and actually get the injectors and AFM installed. But, if you would prefer to drop a whole lot more money on the ECU side, then I suspect you're looking at Haltech. The Haltech fanbois here will all spout on about all the available engine protection you can have, that you can't have with the Nistune option. And they're right. But it doesn't really come for free either. You will spend more money on extra sensors and the like, plus the work to install them. If the engine was built and therefore represented a big investment to protect, then I'd say definitely do it. If you view the current (and forever into the future) shortage of replacement engines as something to prompt similar protection, then also, do it. If you see a destroyed RB25 as an opportunity to put in a Mercedes or other V12 (like I kinda do)... then your perception of the risk/reward might differ. These are good injectors. You can also get a "better" set of the same with more flow matching, for more $$. 1000cc is where you will want to be. You will need an R35 AFM and adapter tube if you want to stay with Nistuned stock ECU. Otherwise, if going Haltech, you can ignore. As for intercooler. Just about anything will do. You're only talking about ~300rwkW. Just put a big core in there. Be aware that return flows do add significant pressure drop and will cost power and will make the turbo work harder to achieve the same goals. If you can manage a proper crossflow, do it. I'm keeping my very good return flow because I'm only expecting to be in the ~250rwkW range, and will live with whatever outcome I get.
    • I have a heap that i have collected if you want some authentic ones still. Pm me if your interested!
×
×
  • Create New...