Jump to content
SAU Community

Recommended Posts

Some prices are neg. Craig. MOB: 0439691454 email: [email protected]

here are 6x nismo 555cc side feed injectors for rb25det, sr20det, 13bt etc. with all O-rings, washers plugs and rubbers and grommets. they have been cleaned and flow tested as well, this alone is over $120. they pushed out 660cc/min on the flow bench so nothing to worry about. with recipt to prove. $700 pick up. or interstate postage (buyer to pay).

these.jpg

here is a used Z32 AFM with plug. $150

these2.jpg

here we have a walbro 341-gss 255lph (with all the mounting gear plugs etc). it has the same internals and ratings as the 342-gss. the only difference being the outlet. the 341 has the outlet on the other side of the inlet. where as the 342 has it straight in line with the inlet. it will not make a difference whatsoever. $110 pick up. or interstate postage (buyer to pay).

selling4.jpg

here we have a r33 gtst used sard top intake sports induction kit with bolts to mount it. $40 pick up. or interstate postage (buyer to pay).

selling5.jpg

here are 4x r33 rims with brand new nexen 16/225/50 rubber. $500 the lot. the rims themselves have oxidized streaks in the clear coat. probably from brake fluid from previous owner. pick up. or interstate postage (buyer to pay). can deliver in sydney for $25.

DSCF3288.jpg

DSCF3291.jpg

here are 4 mazda eunos rims, no tyres, with the 114 pcd 5stud pattern. $100 they fit the rear but will need spacers to fit the front. pick up. or interstate postage (buyer to pay). can deliver in sydney for $25.

DSCF3292.jpg

DSCF3293.jpg

here are 3x 17 235s rubber only 1 is federal 595ss the others are falken 326's. 35-40% the tread is above the wear indicators.

pick up. but can deliver in sydney for $25.

DSCF3290.jpg

here are stock r33 gtst front and rear sway bars with rubbers. $40 ea. pick up. or interstate postage (buyer to pay). can deliver in sydney for $25.

DSCF3266.jpg

here is a series 1 front bar for an r33 gtst. needs a respray $60 pick up. can deliver in sydney for $25.

DSCF3275.jpg

here is a LHS fender it needs to be resprayed and pannel beated slightly for the dint and the headlight surround. it would do for a drift car though. the damage is minor. see pics. pick up only.

DSCF3268.jpg

DSCF3269.jpg

DSCF3270.jpg

here is a left over sheet of aluminum mesh.$15. the largest part measures 59cm L x 27.5cm W. the but overall it is 121cm L. pick up only.

DSCF3267.jpg

here we have 2x universal racing harness's (one red and the other black). with all of the hardware to fit them. i will separate these. $50ea. pick up or buyer pays postage.

selling.jpg

here we have 2x r33 gtst whiteline subframe split pineapples. these are split so they can be fitted to the upper part of the subframe bush. used to set the car at neutral stance when used with 2 other pineapples. $10 pick up. or interstate postage (buyer to pay).

selling8.jpg

here we have a 2.5" x 3" silicone/rubber intercooler pipe join. $15 for the join. pick up. or interstate postage (buyer to pay).

selling9.jpg

here is 1 LHS 400r nismo side skirt in primer still needs prep work. $40 pick up. or can deliver in sydney for $25.

DSCF2790.jpg

here is an r33 gtst stock radiator perfect condition. needs to be cleaned and flushed by a pro shop. $40 pick up. or interstate postage (buyer to pay).

DSCF3314.jpg

here is a holden commodore VT washer bottle pump and a one way valve to stop the hose leaking when the pumps not in use. for a DIY intercooler spray kit. $30 delivered.

DSCF3315.jpg

here is a suzuki swift ,and gti, tie rod end brand new $10.

these3.jpg

Edited by Trust33

he's from sydney (or so i think from the part he sed he'd deliver in syd yadda yadda)...

where bouts in syd are u? got any pics of how the sard intake thingo sits in engine bay??

hey. i think i do but they are amongst some old photos. i will have to get them tomorrow.

hey mate you had a quick scan for what? i am located in ingleburn.

he was after where u located lol

yea shoot up a pic of two i'll probs take it if it acts like a pod enclosure blah blah thing

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Absolutely this. Yes, except not vacuum hose. Something oil/fuel safe is a better idea.
    • Like a Stagea, but not as cool! Hope you have enough garage space for this, or is something going to leave to make way for it?
    • The new project has arrived. I have wanted one of these for such a long time, well before that meathead Clarkson drove one in Africa. I really wanted an E34 but I have some medical issues that mean I *really* can't bump my head and the lack of airbags in the E34 made it just too big of a risk.  I don't know why I've always liked these older touring BMW's to be honest, but man I love this car. She's been pretty well maintained for her 243k's with what appears to be only a single oil leak at the oil filter housing gasket. It has a bunch of updates including later model bumper and headlights, 7 series billion-way adjustable seats and it came with a few spares and another set of wheels with legal tyres. I got a unregistered car permit from the RTA and drove it back from Canberra on Saturday.                   First cab off the rank is cleaning it up for blue slip. I dont know how picky they'll be but I figured I'd clean the headlights, fix the oil filter housing gasket, replace the speed sensors (throwing errors) and swap the OE wheels (the M Sport wheels have a big chunk out of one of the tyres.) I also need to replace all 6 gas struts - 2 for bonnet, 2 for hatch and 2 for hatch glass. The car tries to eat me whenever i open any of these. My plan for this car; Ultimately, this is a budget car. I can't afford to throw lots at it and its because I have another car that I got this, if something breaks its no big deal. I will just maintain and repair it really. But eventually I want to do a manual conversion. It actually looks pretty straight forward for E39's and the trickiest part will be sourcing the parts.  I do need to replace some suspension arms or bushes because wow, she's a floaty old girl. She's also fantastically slow. Like really, really slow. When pulling back out on to the freeway on Sat after a quick pull over I needed to wait until no cars were visible before going.  Oh, and the guy I bought it from had a gorgeous R31 GTS-X in the garage. 
    • Do you have a picture? I assume it is a breather for gearbox oil as it expands, it should have a vacuum line run nice and high in the engine bay (R32 GTR has it on a top bellhousing bolt)
    • Hi all, I am putting an r33 gtst gearbox into a VL and have noticed what looks like a vacuum barb on the box (on top in the middle). Suspecting that it's a vacuum line but I'd like to double check, if someone could confirm the function of that would be great. Cheers in advance.
×
×
  • Create New...