Jump to content
SAU Community

Recommended Posts

Some prices are neg. Craig. MOB: 0439691454 email: [email protected]

here are 6x nismo 555cc side feed injectors for rb25det, sr20det, 13bt etc. with all O-rings, washers plugs and rubbers and grommets. they have been cleaned and flow tested as well, this alone is over $120. they pushed out 660cc/min on the flow bench so nothing to worry about. with recipt to prove. $700 pick up. or interstate postage (buyer to pay).

these.jpg

here is a used Z32 AFM with plug. $150

these2.jpg

here we have a walbro 341-gss 255lph (with all the mounting gear plugs etc). it has the same internals and ratings as the 342-gss. the only difference being the outlet. the 341 has the outlet on the other side of the inlet. where as the 342 has it straight in line with the inlet. it will not make a difference whatsoever. $110 pick up. or interstate postage (buyer to pay).

selling4.jpg

here we have a r33 gtst used sard top intake sports induction kit with bolts to mount it. $40 pick up. or interstate postage (buyer to pay).

selling5.jpg

here are 4x r33 rims with brand new nexen 16/225/50 rubber. $500 the lot. the rims themselves have oxidized streaks in the clear coat. probably from brake fluid from previous owner. pick up. or interstate postage (buyer to pay). can deliver in sydney for $25.

DSCF3288.jpg

DSCF3291.jpg

here are 4 mazda eunos rims, no tyres, with the 114 pcd 5stud pattern. $100 they fit the rear but will need spacers to fit the front. pick up. or interstate postage (buyer to pay). can deliver in sydney for $25.

DSCF3292.jpg

DSCF3293.jpg

here are 3x 17 235s rubber only 1 is federal 595ss the others are falken 326's. 35-40% the tread is above the wear indicators.

pick up. but can deliver in sydney for $25.

DSCF3290.jpg

here are stock r33 gtst front and rear sway bars with rubbers. $40 ea. pick up. or interstate postage (buyer to pay). can deliver in sydney for $25.

DSCF3266.jpg

here is a series 1 front bar for an r33 gtst. needs a respray $60 pick up. can deliver in sydney for $25.

DSCF3275.jpg

here is a LHS fender it needs to be resprayed and pannel beated slightly for the dint and the headlight surround. it would do for a drift car though. the damage is minor. see pics. pick up only.

DSCF3268.jpg

DSCF3269.jpg

DSCF3270.jpg

here is a left over sheet of aluminum mesh.$15. the largest part measures 59cm L x 27.5cm W. the but overall it is 121cm L. pick up only.

DSCF3267.jpg

here we have 2x universal racing harness's (one red and the other black). with all of the hardware to fit them. i will separate these. $50ea. pick up or buyer pays postage.

selling.jpg

here we have 2x r33 gtst whiteline subframe split pineapples. these are split so they can be fitted to the upper part of the subframe bush. used to set the car at neutral stance when used with 2 other pineapples. $10 pick up. or interstate postage (buyer to pay).

selling8.jpg

here we have a 2.5" x 3" silicone/rubber intercooler pipe join. $15 for the join. pick up. or interstate postage (buyer to pay).

selling9.jpg

here is 1 LHS 400r nismo side skirt in primer still needs prep work. $40 pick up. or can deliver in sydney for $25.

DSCF2790.jpg

here is an r33 gtst stock radiator perfect condition. needs to be cleaned and flushed by a pro shop. $40 pick up. or interstate postage (buyer to pay).

DSCF3314.jpg

here is a holden commodore VT washer bottle pump and a one way valve to stop the hose leaking when the pumps not in use. for a DIY intercooler spray kit. $30 delivered.

DSCF3315.jpg

here is a suzuki swift ,and gti, tie rod end brand new $10.

these3.jpg

Edited by Trust33

he's from sydney (or so i think from the part he sed he'd deliver in syd yadda yadda)...

where bouts in syd are u? got any pics of how the sard intake thingo sits in engine bay??

hey. i think i do but they are amongst some old photos. i will have to get them tomorrow.

hey mate you had a quick scan for what? i am located in ingleburn.

he was after where u located lol

yea shoot up a pic of two i'll probs take it if it acts like a pod enclosure blah blah thing

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Ahhh, that, yeah, but it all worked out well in the end As for the ITB noises, I don't really wind it out with her in the car, and the dort only really starts dorting hard when your WOT or up it hard
    • It wasn't about the dollars. I mean how she didn't like the loud exhaust and you had to change it again 😛
    • I'll tell her I put in a new air filter on it, which, it would have anyway with the ITB's In the end she isn't to fussed, she spends lots of money on hair, nails, make-up and all the other "required" beauty products that women use, plus I grease the wheels with shiny gifts and holidays wherever and whenever I can She once questioned my car spending "budget", but after itemising everything she spends on herself, and what I spend on her, and the fact that I don't care if she does or doesn't wear make-up and fancy pants perfume, or requires new outfits for every wedding, funeral or anything else she deems worthy, and I'm quite happy to go "real" camping, instead of staying in hotels or jaunts on cruise ships, she decided not to press the subject on how I spend funds, and has never asked "how much did that cost" again, so a win to me And how often can you say you really get a win with the fairer sex? She is a good woman, and in the big picture, I'm really lucky.....that she hasn't killed me yet
    • What will you do when the Minister of War and Finance says the intake noises are too loud?
    • Will the clear coat dissolve the ink tho?? I thought about clear vinyl tape too. Thinking what to do haha. The one I have now is cracked in 1 spot, otherwise mint. Plus the MINES one is much thicker plastic material so its not flimsy at all.
×
×
  • Create New...