Jump to content
SAU Community

Nismo Z-tune Style Gt-r Bonnet On A Gt-t

mgb2002

By mgb2002,
in Exterior & Interior Styling

 Share

Recommended Posts

mgb2002 Apprentice

mgb2002

Posted
Posted

I would like to put on a Nismo Z-tune style GT-R bonnet on a GT-T.

Already getting the East Bear front, but don't like the look of their bonnet.

What would I need to do this?

Hinges, locking mechanism, front wings?

RusH_ Veteran

RusH_

Posted
Posted

im sure there are several threads covering what you would need to fit a gtr bonnet to a gtt, do a search, and you should get a more definitive answer.

im pretty sure that its just the hinges, mechanisms to keep the bonnet down/bonnet release, and the obvious gtr styled front bar or gtt bar with a top mole.

NZMO Experienced

NZMO

Posted
Posted

Yes Rush is right, there are a few threads covering this.

Here is the part numbers you will need to order from Nissan Japan ( order via Local Nissan Dealer and they will import) You will also need to pay for the parts up front before your dealer will order them most of the time.

I will also list the prices but dont quote me ,the price may have increased slightly since i purchased mine.

Nissan GTR OEM Part numbers

65400-AA400 - Hinge Assembly - RH - $81 Australian

65401-AA400 - Hinge Assembly - LH - $84 Australian

62550-AA400 - Stay - Hood Lock - $88 Australian

65601-AA400 - Male Assembly Hood Lock - $100 Australian

It will probably be easier to use a GTT front bar with a Nose attachment rather than going all out to modify a GTR bonnet ( i went all out, very expensive and long time - need much patience) If you choose to go a GTR bar and not modify it then you will need to change the guards which will also mean bigger rims to fill the space or spacers which i wouldn't recommend.

All the best with this.

David.

post-7461-1238105955_thumb.jpg

mgb2002 Apprentice

mgb2002

Posted
  • Author
Posted (edited)

Sorry for not using the search function (usually the first to tell others they have to :P strange :P )

I'm going for the East Bear Spec 2 kit from Knight-Racer, but as stated I want a different bonnet.

The GTR bar from KR will fit the GTT wings.

img_022.jpg

NZMO thank you for the part numbers.

Is the locking mechanism easy to change or do you have to drill holes in the framework to fit the GTR lock?

And the GTR bonnet is just as width and has the same front line (where the headlights are mounted) as the GTT bonnet?

Edited by mgb2002
Darkplague Enthusiast

Darkplague

Posted
Posted (edited)

As far as i know that bonnet is exactly like the gtr, meaning the front of the bonnet doesnt fold down like the gtt. So it would be exactly like putting the east bear bonnet on, but...ztune lol.

If thats what your talking about.

Edited by Darkplague
NZMO Experienced

NZMO

Posted
Posted
As far as i know that bonnet is exactly like the gtr, meaning the front of the bonnet doesnt fold down like the gtt. So it would be exactly like putting the east bear bonnet on, but...ztune lol.

If thats what your talking about.

Josh's ( JSAI ) their Z-Tune Bonnets for the GTT actually do fold down over the nose.

NZMO Experienced

NZMO

Posted
Posted
hey NZMO, are they impul side skirts?

yes they sure are, im not sure what ill be doing in the coming months with them as im going for GTR rear guards(which means ill also have to change my rear bar to a GTR bar to line up - hence my signature wanted to buy ) and Z-Tune front guards being GTR fitment i dont think ill be able to keep these skirts as ill have to go either Z-tune skirts and modify them not sure as yet.

NZMO Experienced

NZMO

Posted
Posted
Sorry for not using the search function (usually the first to tell others they have to :down: strange :P )

I'm going for the East Bear Spec 2 kit from Knight-Racer, but as stated I want a different bonnet.

The GTR bar from KR will fit the GTT wings.

img_022.jpg

NZMO thank you for the part numbers.

Is the locking mechanism easy to change or do you have to drill holes in the framework to fit the GTR lock?

And the GTR bonnet is just as width and has the same front line (where the headlights are mounted) as the GTT bonnet?

For the locking mechanism there is not to much involved and as for the bonnet it does line up with the guards line and head lights.

Good luck with your project, i know its not going to be cheap.

Nice kit too , my front Bar is Top Secret GTR.

cheers,

David.

Darkplague Enthusiast

Darkplague

Posted
Posted (edited)
Josh's ( JSAI ) their Z-Tune Bonnets for the GTT actually do fold down over the nose.

Ah ok my bad the jsai gtr and gtt ztune bonnets looked identical.

Edited by Darkplague
myRB25DETT Community Regular

myRB25DETT

Posted
Posted

hey guys ...

sorry if this is out of topic, i was wondering where can i get a east bear front bumper spoiler/lip for my gtt in melbourne?? just really hard to find the lip...pls help!! PM me if anyone can help..!

  • 3 weeks later...
barry1024 Enthusiast

barry1024

Posted
Posted
hey guys ...

sorry if this is out of topic, i was wondering where can i get a east bear front bumper spoiler/lip for my gtt in melbourne?? just really hard to find the lip...pls help!! PM me if anyone can help..!

i want to know too... :)

and can someone tell me how does GT-R front bar not fit to GT-T(if i already fit a GT-R bonnet, Hinge Assembly & Hood Lock )?

is that the front guards too big or what??

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Gareth87
      What should I do next to hold the head on

      By Gareth87 · Posted

      I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • TurboTapin
      new 1.5 LSD issues/concerns

      By TurboTapin · Posted

      My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • MBS206
      NC MX5

      By MBS206 · Posted

      Bunnings would have just handed you your money back on that one!
    • The Bogan
      NC MX5

      By The Bogan · Posted

      So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...