Jump to content
SAU Community

Recommended Posts

  • Replies 42
  • Created
  • Last Reply

Top Posters In This Topic

my 60 foot was 1.73 on the 11.11 run benm. I did a bigger burnout that time so i think tyres will help heaps.

I also noticed that the car drops out of boost on every gear change it takes a little time for power to come back up again. So i am going to get this big greddy BOV that i have put on this week if t04 dave can help out and try again.

i have also ran 131 mph before.. so yeah lets see what happens next time. I think the launch control is setup right now.

If you have a spare DI that should fix your issue with dropping boost on shifts, mine holds full boost through shifts with it on. If you are referring to the plug on the switch for the clutch i just cut the wires and soldered new ones to the ecu.

If you have a spare DI that should fix your issue with dropping boost on shifts, mine holds full boost through shifts with it on. If you are referring to the plug on the switch for the clutch i just cut the wires and soldered new ones to the ecu.

plug for clutch pedal switch

my 60 foot was 1.73 on the 11.11 run benm. I did a bigger burnout that time so i think tyres will help heaps.

I also noticed that the car drops out of boost on every gear change it takes a little time for power to come back up again. So i am going to get this big greddy BOV that i have put on this week if t04 dave can help out and try again.

i have also ran 131 mph before.. so yeah lets see what happens next time. I think the launch control is setup right now.

Where's your pressure source for your wastegate?

If you take the pressure source from the inlet plenum, it helps smash the waste gate closed when shifting which helps bring boost on quicker... Especially if you run no BOV it will make a HUGE difference...

you finally cought up to my 2.5l's time congrats e85 is nice, get a real turbo man ditch the 35r to small for a 3.0l, wish i had a decent track to use here in peru but oh well, lets see what my rb26 setup does down here get on msn some times fool

Congrats! Damm fine time you did!

If your running a HKS SSQV it could well be the reason for dropping out of boost between gears, I have removed a few of them now and replaced with the Greddy RS or the Tial 50mm (bit overkill for most) and presto, problem solved.

Im also doing 131mph, but with 2.1 60fts :-( hell I wish he had a drag strip around here.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Actually,  just remembered there should be info in the threads (somewhere) about swapping to a manual steering rack and deleting power steering all together. 
    • Also had a look at the Nissan JP website looks like the 400r has a slightly shorter ratio than than the regular V37 3.133 VS 2.937 which from a guy who has driven both 3.69 vs 4.11 ratios in the S15 is bugger all. Seems that the AUTO Z runs the same ratio as the 400R but can't find any info as to if its an open or LSD? More often than not the auto LSD is open
    • Do not replace the power steering lines with this stuff. If it's anything like the Chase Bays stuff it will leak and be worse than stock. The reason why the reservoir is on the LH/passenger side of the car is because that's just where the reservoir was most convenient to fit. Don't overthink this stuff. The intake/cold side of the engine is pretty busy on these cars. And again, the hardpipe is designed to be a janky power steering cooler. In theory you can replace it with a real power steering cooler but that's really only for track use where boiling the fluid is a distinct possibility. Start with the low pressure lines feeding the pump from the reservoir. Make sure there isn't a bunch of junk in the reservoir filter. Be careful to not get ATF all over the engine bay. I hate dealing with ATF spills, you can clean it up and the slightest crevice will still release more oil that can still drip over time. You also want to inspect for leaks before you make a mess and can't tell what happened. Most likely you have a leak somewhere that is allowing fluid out and air in. Failing that it's allowing air in but not fluid out. Only place I can really see that happening is on the low pressure side because the pump will pull a slight vacuum to draw fluid in. Everything after the pump is high pressure or lower pressure, approaching atmospheric by the time it returns to the reservoir.
    • I did a skidpan night at SMSP this week, it was much cheaper than $350. But yeah, you need to slap an LSD in that thing.  I put an OS Giken in the 370Z and it's f**king MARVELOUS even compared to Nissan's viscous LSD. So you're saying it's free now that it's a housing estate? 😂
    • Nah, the car seems to run exactly as it did prior, in saying this it does "seem" to be better down low, like more eager to rev, but that may be 100% placebo effect from intake noise But, I'm not worried about it at all, in the end it is a fairly low compression NA engine that has a well shrouded intake,  if it is getting hotter IAT I cannot notice anything negative performance wise from the seat of my pants thrashing it about on the street or sitting in traffic, so meh, car now now makes induction noise so I'm happy
×
×
  • Create New...