Jump to content
SAU Community

Failing Splitfire Coilpacks

lcy

By lcy,
in Engines & Forced Induction

 Share

Recommended Posts

lcy Rising Star

lcy

Posted
Posted

Hi guys and gals!

I am currently having some misfiring problems. Yes i have change it to SPlitfires which are only 14 months old. Mechanic reckons thats the problem. Maybe a faulty one. Low boost doesnt misfires but when i am on high boost it misfires.

So i have been told it might also be the AFM but it has been changed to a new one. Spark plugs are new. We are eliminating the CAS, as the tuner says the power graph doenst show irregularities.(or something like that, power doesnt goes up and down)

What could also cause this problem??

If any of you guys ever had this problem pls let me know!! Any help would much be appreciated!!!

THANK YOU IN ADVANCE!!!! :thumbsup:

Link to comment
https://www.sau.com.au/forums/topic/263105-failing-splitfire-coilpacks/
Share on other sites
lcy Rising Star

lcy

Posted
  • Author
Posted

Nope... check new fuel pump + bp 98 only.

The car actually doesnt misfires that much when i had a service. Before the service it does misfires alot. Service was just a regular service(oil + oil filter).

This doesnt happen all the time. Sometimes it can work like a dream and sometimes its being a bitch!

Ultimategtr Proficient

Ultimategtr

Posted
Posted

Instead of changing the AFM/PLUGS etc and spending money on those things, the VERY first thing one should have done(i know i would have), was run a diagnostic on the stock ecu(if its still stock).

Checking simple things like timing, fuel pump pressure etc.

What gaps are you running?

lcy Rising Star

lcy

Posted
  • Author
Posted

I am running PowerFC. Timing was drop, tuner says nothing wrong with the CAS.

When the car is on Low Boost (10 psi) it doesnt misfires but on 16psi it just goes POP POP POP around 5k rpm....

Will check on fuel pump pressure and fuel filter(is this the one on on the fuel pump? If so it should be new.)

Car is running a gt30, fuel pump, 650cc injectors, z32 afm and all the usual upgrades. Tune looks very good. 12.1 afr which really cant be justified because every engine might have a different characteristics.

lcy Rising Star

lcy

Posted
  • Author
Posted

I had already brought the car back 4 times since i got the car back. Tuner still reckons its the coilpack that needs changing. Final!

during the tuning process the enigne didnt even misfire at all! On the dyno it didnt misfire hence the tuner didnt even know it was happening.

Its when i brought the car back and took it for a drive, it started to misfire and pinging (engine light keeps popping up on 3rd gear). So back to the tuner again and timing was drop and everything seems fine but its still misfiring on 16 psi.

lcy Rising Star

lcy

Posted
  • Author
Posted (edited)

Just added: Dyno 3 times. Didnt misfire on dyno and car made 350rwhp on first tune then timing drop it was making 320rwhp.

JUst to add some info. THe car was tune by a reputable tuner.

I have brought my car to several different place and have been told off many times. Everyone has a different story and some doesnt want to touch the car as most said "Trust in your tuner furthermore he is the best around!". This are from mechanics and tuner alike.

1st graph = when i first got the car

2nd graph = timing drop

post-40804-1238297260_thumb.png

afr2.pdf

Edited by lcy
SECURITY Grand Master

SECURITY

Posted
Posted

im just having a stab in the dark here but this could be leading off your white-smoke problem in your other thread. if you've got water entering your combustion chamber then it will misfire.

fix your other problem first.

aphid Proficient

aphid

Posted
Posted

I would agree and say that it definently sounds like a coil pack problem.

Splitfires arn't infallable, infact in another 2-3 years time when some of the originals start getting older I'd put money on it we'll see more fail in exactly the same fashion the stockies fail.

Just to make sure swap it with a known good pair to see if that makes any difference, and like others have said I'd also be checking your plugs / plug gapping just to be certain.

Good luck!

Ultimategtr Proficient

Ultimategtr

Posted
Posted

Just to take a wild stab - 1 way to find out if the coils are on there way out is to measure the resistance between A-B(i think - as per factory manual).

Now i know that the readings in the manual are for stock coils. However the readings you get, write them down and compare them individually.

eg coils 1-4 have around 20k-22k resistance where as 5 and 6 are getting 29k.. that would "KINDOF" indicate that 5 and 6 possibly could be faulty, judging their resistance. This method is only going to test the primary coil tho, not the secondary coil.

Thats 1 easy way of testing it, the other is to take the coils out and take it to a professional sparky - where they can load up the coil to a few hundred V on their test bench and see if theres anything wrong. This would be better - as the coil heats up, the resitance would too, therefore this test would be more accurate.

docang Explorer

docang

Posted
Posted (edited)

Try checking the coil harness as sometimes they give problems especially the connectors as they are prone to get loose after some years of connecting and disconnecting and also greatly affected by the engine heat.

Even after 2-3months on a third new coil harness my engine was intermittently misfiring and my mechanic did some mods to the connectors by trimming some plastic bits in them for better contact and this cured the misfirings. Leaky valve covers gaskets will also let oil get to the plugs causing misfiring and this happened to me just this past week.

Edited by docang

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • soviet_merlin
      Cleaning my wheels 😍

      By soviet_merlin · Posted

      Ah yes, fair enough! I was purely thinking about cleaning the spokes and front of the wheel with the mitt. For the barrel the rag on a stick makes more sense. I've tried cleaning the barrels on mine and gave up in frustration. Between brakes being in the way or spokes being in the way and limited space to constantly move the car front and back it was just too annoying. The barrel being as shiny as the rest of the wheel sounds amazing though. At this point I'm not even sure if they have the same surface finish on mine. But I feel inspired now to find out.
    • GTSBoy
      Cleaning my wheels 😍

      By GTSBoy · Posted

      I have a wheel cleaner pokie thing which is a glorified microfibre rag on a stick, and there is not sufficient clearance between the caliper and the barrel to clean that section. I just roll the car forward 500mm and have another shot at each wheel.
    • The Bogan
      Cleaning my wheels 😍

      By The Bogan · Posted

      The "rag on a stick" is a easy way to fit in between the wheel spokes into all of the barrel Albeit I do have 10 spokes on the MX5 which limits the access to actually jam my hand in to clean the barrel, but it was also makes much easier to clean the 5 spokes on the Dunnydoore with it as well, as you don't have to worry the  caliper getting in the way if you have at least about 15mm space between the caliper and barrel This of course depends if you actually have the clearance between the barrel and caliper, and the amount of OCD you have to get the barrels as clean and shiny as the face of the wheel The thing is bendy as well so you can actually shape it to conform to the inner lip of the barrel  
    • Duncan
      Alarm/immobiliser recomendations for an R33

      By Duncan · Posted

      FWIW, as well as a basic immobiliser/remote unlock (all basic units give you those 2 things), I would also install a 4g tracker in any car I cared about. Just hide it anywhere that won't be found in a rushed look and preferably get something with a built in battery backup so it stays online for a while when the battery is removed or flat While its not a car, when our car trailer was stolen in that den of crime Sydney about a decade ago, the cops were watching from the bloke's neighbour's lawn within about 2 hours until he started swapping the plates and putting up the gumtree ad.   Obviously it is still not undefeatable (eg parking it up for a few days somewhere without sky sight) but it greatly improves your chances of getting it back quickly and with less damage
    • soviet_merlin
      Use text replace function to auto-link to referred threads?

      By soviet_merlin · Posted

      Instead of magic keyphrases I wonder if something can be done with auto complete. Similar to how user names are handled already. When you type '@' and follow with letters, it'll search across all usernames. It might work to have the same for forum topics. Some key to trigger it and then text search across all thread names and it'll insert the name and URL when pressing enter.
×
×
  • Create New...