Jump to content
SAU Community

Recommended Posts

What do ppl think is the best option for a 32 gtst, rb20 with a vg30. Looking for over 210rwkw.

I know these types of pumps are what most ppl are going for but which is better?

Is there anything I should know? Are they easy to install?

Help me, i'm "fuel pump" challenged.

Link to comment
https://www.sau.com.au/forums/topic/263379-bosch-fuel-pumps/
Share on other sites

I had a bosch 040 in my car before i upgraded to a nismo. It held up fine with 230rwkw and im sure the could take a lot more, mine was just held in with a hose clamp. I still got it laying around if decide to go for one.

i have a Bosch 040 in my car atm

it works a treat till on a hot day....the fuel level if it drops below 1/4 tank the car starts to starve

on a cold winters night i have gone below E so..must have something to do with the weather

its not that loud either and yes they can handle more power...bang for buck i say

i have a Bosch 040 in my car atm

it works a treat till on a hot day....the fuel level if it drops below 1/4 tank the car starts to starve

on a cold winters night i have gone below E so..must have something to do with the weather

its not that loud either and yes they can handle more power...bang for buck i say

If i where you i'd be throwing that pump in the bin before you lose your motor.

I use an 040 as a lift pump on my 1000hp drag car...no problems with fueling even on the hottest of track days and i only ever have a maximum of 20litres in the tank.

Edited by DiRTgarage
I use an 040 as a lift pump on my 1000hp drag car...no problems with fueling even on the hottest of track days and i only ever have a maximum of 20litres in the tank.

fine as a lift pump......don't know how far you'd go as a stand alone which is what these kids are after me thinks

Im going a twin 044 set up with a custom surge tank in a perspex box in my boot shortly. Iv'e already got a nismo pump for a lift pump. Should be all ok for 450-500 i hope.

BTW if your after Bosch pumps check the group buy section. Both 040 and 044 are $220 del. That's where im getting mine from.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi everyone, just looking to see what's available in the GTR seat options, testing the waters on what's available. Wanting a driver's seat to replace my old school OG jap race seat, going to re-register the car so need a factory seat. Prices currently seem to go from $300 to $2k for a driver's seat. What's options are there, that's good condition and actually a realistic price? Located Brisbane. Thanks
    • Are these a plug and play setup, and do they need a tune, like a haltech ecu etc? Thanks
    • Nice work on the paint. Those 3 studs are long as. 
    • Hi everyone, still chasing a bunch of this stuff. Thanks
    • Been over 2 months since I have done anything on the S15 and had a day off today so got stuck into mounting the radiator and intercooler. I ended up using factory bottom mounts as bolted in and I did order some gktech top brackets but didn't work with the PWR radiator so made up some with aluminium flat bar. Spent way to long on them but pretty happy how they are. Next job was the intercooler. Used some more aluminium flat bar and did the bottom mounts first. Top was easy as just one long piece and 2 90 degree coming off rad support and welded them on. The bumper support required some notching to let the outlets sit where I want so will add some reinforcement later to strengthen it. I have also bought ecu and waiting for it to arrive. Went with a Link g4x Xtreme but will be adding a ptmotorsport expander to add a few extra inputs over CAN. Went through a few different configurations on pclink to get what I want to allow future expansion for sensors and gearbox upgrades. Ordered gktech rear arms but looking at the hardrace lower control arms to have some extra adjustment too will see how the alignment looks after first setup. Got 2 more weeks of work before shut down and will have almost 4 weeks to work on this so planning on hopefully firing up mid January.   Also bought a 2015 brz with a heap of good gear, did noosa hill climb a month back. Owned it for 3 days changed alignment and sent it. Finished the weekend 2nd in class and only .3 off the 180sx best time last year. MCA Red coilovers, gktech rear lca, bolt on lock kit and tie rods, whiteline toe arms, cusco 1.5way diff and 4.5 ratio, endless brake pads, headers, exhaust, perrin intake and e85 tune. Electronic steering adjustment, nankang crs with koya wheels 17x9 +35. Have bought rear traction arm and relocation kit, extended studs and v3 tie rod kit. Planning on also getting flex tune as lucky to get 300km a tank with e85 and short ratio. Car is a heap of fun to drive and super easy to work on. AC in the line up at Noosa was mint in 35degree weather.
×
×
  • Create New...