Jump to content
SAU Community

Recommended Posts

I assumed that the day would begin at 5pm (followed the link in this thread, it said 5pm then realized that was for drift)

The Mallala website is useless.

This only information I could find was this flyer:

http://www.mallala.com/startyourengines/PTD%20Brochure.pdf

Which must be about something else as it is $495 per day, but says that the session starts at 8:30am.

So i guess I will call them tomorrow to get all the details, does it start at 8:30 or 5? and why isn't that information readily available on their website?

you'd think you could click on the event you were interested in on the website and it would give you details, or at least that the details would be SOMEWHERE on the site.

Jeez it's late.

Edited by medman2damax
  • Replies 70
  • Created
  • Last Reply

Top Posters In This Topic

Hi All,

Just called mallala, spoke to Pete, asked for some info, he said the session tomorrow starts at 8:30 but he was not sure about cost. I asked him if the prices on the website for 2008 were unchanged (i.e. $100 + $25 for the CAMS license for the day) He said that was probably what it would be.

We both agreed the website was useless.

Clem is the guy with all the info but he won't be there until lunch time, but tomorrow definitely starts at 8:30 am and the cost will be approximately $125.

Will post more info if I end up speaking to Clem later on.

Hope to see some other skylines out there, I'd hate to be representing on my own :P

Since it's an 8:30 start how about BP west Tce at 7:15, head out at 7:30. It takes roughly an hour to get there. If anyone is keen to meet up PM me and we'll exchange details.

The Caltex on Port Wakefield road, Bolivar is a good place to meet, last stop to fill up and get food, etc.

Please don't put Caltex in your car, go across the road to BP. My R32GTR with caltex fuel and 4000rpm = knocking at 82. BP fuel and 7000rpm = knocking at 20.

Ryan

Hey all,

I was out there today (someone had to represent). Was pleasantly surprised to find a few of our brethren there. RBWARE was there and so was BANNED, Plus another R32 GTR (silver one, forgot the dude's name). There was also one other 33 on the track besides me, Charcoal one with black wheels.

Was good fun, Stock brakes did alright, after 15 mins of hard use they gave up though but there were one hour intervals between runs so they had plenty of time to cool off between runs. They were fine again at the beginning of the next round.

I was sorely dissapoitned in my cheap ass tires. Pirelli's or Toyo's next time.

There was a good mixture of cars, some old school (Datsun 1600 running an FJ turbo, Old escort, old corolla, datsun 240z) some newer (our skylines, evo 7, evo 9) some brand spankers (350z, focus turbo, civic type r, evo 10). There was one R34 GTR track car but that didn't go on at the same time.

My exhaust looked brand new after that's how clean it was, apparently my car was shooting flames occasionally.

Some photos:

My exhaust is sooooooo clean!!

post-52381-1238837841_thumb.jpg

About to get on the track:

post-52381-1238837962_thumb.jpg

Cooling off....

post-52381-1238837897_thumb.jpg

Sadly this thing didn't get out there

post-52381-1238838052_thumb.jpg

These did:

post-52381-1238838104_thumb.jpg

So did this:

post-52381-1238838146_thumb.jpg

If you haven't been before I HIGHLY recommend it, brilliant fun and you don't have to worry about breaking anything, you don't have to go all out, my third run I took it easier but still had a good time. The safety rules make it hard to have an accident and even if you come off the track, you're only in the sand, no damage done. I'd liek to see more of us there next time.

Total cost was $125 for the track and a 1 day CAMS license, plus $50 bucks for a full tank of BP ultimate, I had a quarter of a tank left at the end of the day and I only did 4 out of the 6 rounds.

Good clean fun!

Edited by medman2damax

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • There are several aftermarket options available, from not-too-painful moneyhttps://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35 and  https://justjap.com/products/crank-motorsport-billet-rear-axles-fits-nissan-skyline-r33-gts-t-r34-gt-t?srsltid=AfmBOorQk4xkGUa98kO7v2ePLUiNt-HRrM2AwWNw9mbSIVE1ujBVwY__, all the way up to The Driveshaft Shop https://driveshaftshop.com/skyline-cv-axles/
    • Yeah based on old XRC5964S specs, it looks to be roughly GTX3576R sized? But this 5964S compressor will flow 90lb airflow somewhat similar to the compressors in both the GTX3584RS or G35-1050.. I fully expected the 0.64 rear A/R to choke up top - seems way too small from typical convention - but these are seemingly beneficial over the prior 0.82 results.. Be interesting to see if he comments on the EFR question in that thread - he mentioned in a prior video that BW EFR's were the "cats pajamas 10 years ago", but by the sounds of things all his kits have been using Xona for quite a while now.
    • Yeah it’s still got the oem manual gearbox and clutch, only kinda mods are a blow off valve, coil overs, and a aftermarket intercooler. Also had it for about 2 months now with a lovely midnight purple paint on it.
    • Yeeeppp, been following a lot of the testing on the latest Xona stuff and there are some mental results.  He also went over 1000hp @ 4 hubs on his Mainline with a XRE6364S (63mm) which was also well into the 20psi range before 4000rpm on a 2.5. Crazy stuff. Fwiw the XRE5964S is basically the modern equivalent of their old HTA3582 - would drive nicely enough on an RB25 or 26, but proven capable of a huge amount of power if you want to spicy with rpm tho even at sane boost levels will make stout numbers 
    • The axels in my R33 seem tired, and have a bit of play in them. I cannot find any new of course, not interested in buying used, but I am looking to see if anyone can identify some cross compatible axles. In the states I have seen suggested for S chassis the J30 axles, however for the skyline (as best I can tell) the lengths are about an inch off (2.5cm) on both sides. R33 my measure L 22" R 24.5" GPT L 22.5" 24.25" J30 L 23.5" 25.5"  so shaft length is probably an inch wider. Not sure if someone has another still remanufactured option besides the J30. I figured worst case I can buy a pair tear them down and swap the center shaft. My other option was reaching out to GSP to see if they cannot piece together a set, since the axle stubs are still manufactured, I wouldn't think it be that hard to find a shaft or make a shaft work. 
×
×
  • Create New...