Jump to content
SAU Community

Recommended Posts

I have a wolf data squirt, so the boost controller is built in the squirt, dont know of any solenoid.

The injectors are fine.

As you can hear, the tikkingsound dissapears when i rev the engine.

In that video I can still hear the ticking when you are revving, and it stays at the same rate. It does not increase with revs. That's why it's not an injector.

An electronic boost controller has a solenoid in it.

Are you sure you can't hear the ticking sound when you rev it because the engine noise over rides it? I can definitely hear it

The sound come and goes.

It stops when i rev it. I can make an longer vid tomorrow.

I have driven the car as it is, and there is no problem other than that sound. The engine run really smooth, but the sound is annoying, and it shouldt be there.

In that video I can still hear the ticking when you are revving, and it stays at the same rate. It does not increase with revs. That's why it's not an injector.

An electronic boost controller has a solenoid in it.

Are you sure you can't hear the ticking sound when you rev it because the engine noise over rides it? I can definitely hear it

What he said. It doesn't change with RPM.

You're looking for the boost solenoid or a shorted relay.

When is were going to start the engine today the tikkingsound came when i turned on the ingition, before the car started.

So it have to be an solenoid somwhere, but i cant find it. Have searched after the sound, and felt on solenoids to find the ticking, but havent found anything.

I think it is under the greddy intake somwhere, but it sounds like it comes from the fuelrail. I will probaly find it if i take the plenum off.

Unplug the auxilary air valve.

It is a long weird looking thing under the plenum. It has a purple plug that should be facing towards the firewall. Hard to get to but I can just get my fingers on it to unplug and my arm is f**kEN HUGE!!!

That should solve your problem.

  • 3 months later...

Cheers. Sorry to bump but I'm having this problem and my car randomly stalls as well and the VVT solenoid makes sense. I'll try it out today.

Just fyi, I left the ticking sound unattended for months, and I checked everything that would cause the car to stall except for the VVT so the pieces fit.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...