Jump to content
SAU Community

Recommended Posts

Does anyone know where i can get them from?

I want the headlights that look blue. Not HID. I have seen cars that dont have HID but there lights look blue.

I went and got H1's for my r33 thinkin they were blue but they look white i have 2 extra boxes and non of them are blue.

n e one know a place in perth to get them from or on the net?

Cheers

Link to comment
https://www.sau.com.au/forums/topic/264208-blueish-headlights/
Share on other sites

Are you talking about making the actual light ray blue or are you talking about when the headlight is off and the bulb makes the headlight looks a bit blue?

- For normal halogen, I don't think you can get them to produce blue light. Unless, if they are really tinted blue.

- You could get blue parkers (leds) which will make your headlight looks a little bit blue when the headlight is on (ebay)

- If you get the normal halogen bulbs with the blue film over the bulb, the reflectors will make your headlight appear slightly blue when the lights is off. The film is there to make the light whiter. (Any autoshop, or ebay)

Edited by __PhaseShiftDown

Philips Diamond Vision (5000k), most blue halogen bulb you can get to my knowledge. $145 RRP a pair, you won't be able to see anything at all with them on and the first cop that will see you will pull you up. They are mainly designed for show. Better alternative is the Philips Crystal Vision (4300K) at $99 RRP a pair but not as blue. Atleast cops won't hopefully hassel you and you will see a bit better. (They still aren't ADR approved nor do they give much light).

Problem with halogen bulbs is the higher the kelvin, the less distance and light output you get, anything over 4000K is a step backwards in distance and light output.

I had Crystal Visions for 2 years, now have HID's and i couldn't be happier.

Edited by PM-R33

You can get the diamond visions of ebay for about $89 PP i've had a look at the diamond vision seen them in one of my mates car couldn't warrant spending that amount on bulbs don't get me wrong they look amazing but i felt and im glad others had realised it but it didn't seem to be powerful as normal headlights as in the light died really quickly and didn't get to far on the road. Also i try to keep the po po off my back as much as possible this is just another reason for them to pull you over. If you still want them Autobarn near me sells then if theres one near you go have a look...

Edited by Rhyses Pieces

if you already have the HiD kit but with white bulbs then buy some 8000k bulbs from either this forum or ebay for cheaper then the price of the whole kit. (like $30 for two bulbs). but if you dont already have the HiD kit then your gna need to buy that too...ends up being about $220 in total.

waste of time,,,,, increases cop heat (gran theft auto style lol), and you cannot see in the night properly. I dont know about the expensive $99+ bulbs but the $50 and under are crap

All of the above are valid comments...however, I will add this...if you want your lights to be blue, go HID 8,000 kelvins and you will get this effect, 10,000 kelvins and it will be nearly entirely blue with a tinge of purple.

Phillips Blue Vision bulbs will give you the icey white effect but not blue as you desire.

Personally, I have 8,000 kelvin lights in my car and love them. Have not been pulled over by the cops once. Actually, 1 copper one time even said that my lights were really handy for dark roads. So there you have it. I think this topic is pretty much closed.

what i did was putting a H-Tec halogen bulb from ebay which is really good, not too blue and distance wise is fairly better than the Philip Crystal (had it in my prelude). And for the HID thing, i actually threw in a HID fog light since there are only rules for headlights and not fog light=p.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • As strange as this sounds (as they are fixed back), my Bride Xero CS seats are the most comfortable seats I've used.  I vote go genuine.  The only downside I've found is on very long drives, you can't reposition your body while driving. So even though its comfy, being locked in the same position eventually becomes uncomfortable. I find myself stopping every 3 or so hours to stretch my legs on long drives. 
    • You don't have to be bored driving a Camry. Not based on the way that a couple of f**king Ubereats/Didi/othersortofmethaddlednightshiftattheservicestationrecentimmmigrants were piloting them on the way to work this morning. f**k me dead!
    • FWIW, the Bride reps are really nice to sit in. The only complaint I have, other than the tear in my bolster, is that the velcro used to hold the backrest cushion in place, up under the headrest, is a little obvious and intrusive and could probably be done better. I don't know if that is a "feature" on the genuine ones also though. I haven't looked at a genuine one like the ones I have, only some of the older models. The other thing is, even though I bought the CF ones, I think the CF is really just decorative, over the top of the same FG as the normal seats. And so they really aren't light. Between the solidly built CF/FG seat, the steel frame in the recliner mechanism, and the solid-arse seat rail, they are probably heavier than even the stock seat. They are a serious lift to get in and out of the car.
    • Yes, and so the barest minimum power target is the one that makes the most sense. Massive power is fun, but you can only use it for 1.5s at a time, and only every now and then. Medium power levels allow you to enjoy the car far more often and for longer. 500 engine HP is just below 300 rwkW which is about the maximum that is sensible for any street car really. And for a 2.6L six, it will still leave you with a decent boost response and some sort of linearity of power delivery. As you get up towards 400rwkW the onset of power tends to be increasingly like a cliff and you need drag radials to keep the ground in proper contact with the car, and.... it's just not a car for driving around any more.
    • I already reached that conclusion myself after reading up a whole bunch and watching various videos from multiple sources. Don't know yet how I'd best manage that with the least amount of headache. Probably pulling the sump and just welding on a AN10 adapter or something. I also think it's healthy to take most opinions with a grain of salt, because experiences differ wildly and especially Aussies - when talking about RBs - don't know a world below 600whp drag builds. Personally I doubt I will ever take my R33 racing, so it's going to be a street car with the occasional spirited drive. Hence why I am (so far) under the impression that I'm going to be fine with a stock-ish engine for a while.
×
×
  • Create New...