Jump to content
SAU Community

What Turbo Would I Need?

wallas

By wallas,
in Engines & Forced Induction

 Share

Recommended Posts

wallas Contributor

wallas

Posted
Posted

Morning chaps, a quick quiz for some of you out there.

What turbo would i need for an r33 gtst 2.5 turbo that would bolt on, have an internal wastegate, but the wastegate be seperate to the exhaust port to successfully seal the 2 areas off to bolt a screamer pipe onto.

Im sure someones got the answer, maybe even the turbo i need..

Link to comment
https://www.sau.com.au/forums/topic/264332-what-turbo-would-i-need/
Share on other sites
wallas Contributor

wallas

Posted
  • Author
Posted
anything from garrett and probably half a dozen other turbo manufacturers

you really haven't looked at much have you?

i'ts true i havent looked that much, it needs to be completely seperate so it doesnt sound like a stupid exhaust leak at idle. i cant use the factory turbo as its all one unit and u cant get a proper seal from those screamer pipes that are supposed to be designed for it.

Anyone got a turbo that will suit and bolt up?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • kevboost7
      One Headlight isn't working - Driver Side Fuse Keeps blowing

      By kevboost7 · Posted

      I figured out what’s wrong. It’s something to do with the high beam wire short circuiting. When I measure the continuity with a multimeter on the headlight socket connector it gives me a continuous beeping noise when I put it on the ground socket and also on the high beam socket.  On the passenger side of the car (working side), it’s only beeping when the probe is on the ground socket. Which makes sense.  So that means it has something to do with the high beam power supply for the drivers side. How do I trace that? Is it the turn signal lever malfunctioning? The one that also controls the high beam and low beams. 
    • Bncr33nokout
      Hey lads just a fellow gtr owner

      By Bncr33nokout · Posted

      Hey lads just finished tidying up a gtr a bought. Originally from Sydney now living in New Zealand 
    • slamaa
      R33 GTR/GTS25T Rear Trunk Finisher Panel, 2-Door Models

      By slamaa · Posted

      Hi Guys, Looking for this piece if anyone can help out.   https://tfaspeed.com/products/nissan-skyline-r33-gtr-rear-trunk-finsher-panel
    • Thatjuan
      Nissan Gloria Hy34 issues

      By Thatjuan · Posted

      How did you go with your problem? End up fixing it. Have a y34 aswell vq30det
    • EndZee
      Weird compression after rebuild

      By EndZee · Posted

      But if I smoke test 5th cylinder it’s all ok, no leaks  when I try with 2nd it’s leaking exhaust and intake, it doesn’t come from oil dip stick.    so maybe when car was running poorly, rich or sth. Spark plugs were black and covered in charcoal or sth lookalike. could potential contamination make valves not seal properly? is there also a possibility that rb’s don’t have equal performing cooling passages  meaning back of the engine will be hotter than front. Can this cause improper wear if engine was running under load for short time? Or carbon build up could just burnt from 4-6 and is still on 1-3?   I out of my head like really. Timing is as manual crank-exhaust 47, exhaust-intake 38 at this point I thinking about give it a try and make another 500-1000km and check if anything change, if not I will most likely disassemble engine head /or whole engine and send it back to rebuild. It’s killing me     
×
×
  • Create New...