Wanted To Swap: My Td04 For Your Stock R32 Turbo

[Josh_r32]

Hey I just brought a TD04 Turbo that bolts onto a r32 gtst standard exhuaust manifold. The turbo has no shaft play. It needs a external gate etc so i want to swap this for a standard turbo with no shaft play that will fit my rb20det ( yes there still are stock rb20 turbos with no shaft play!)

PM me if ur keen

thanks

Josh

Edited April 6, 2009 by Josh_r32

[madaz R33]

Hey I just brought a TD04 Turbo that bolts onto a r32 gtst standard exhuaust manifold. The turbo has no shaft play. It needs a external gate etc so i want to swap this for a standard turbo with no shaft play that will fit my rb20det ( yes there still are stock rb20 turbos with no shaft play!)

PM me if ur keen

thanks

Josh

hey bloke i have a stock 32 turbo that has been collecting dust for a while, if memory serves me right it has minimal shaft play but I;ll get laurie from rotech to give it the once over, u mentioned the TD04 needs a external gate etc whats the etc? u mean it just needs a external gate? what about the shaft paly on it? cheers Damo

[XRATED]

pm sent

[Josh_r32]

hey bloke i have a stock 32 turbo that has been collecting dust for a while, if memory serves me right it has minimal shaft play but I;ll get laurie from rotech to give it the once over, u mentioned the TD04 needs a external gate etc whats the etc? u mean it just needs a external gate? what about the shaft paly on it? cheers Damo

sounds good,

It just needs a external gate and the turbo lines, ive attached some pics below

Theres no shaft play on it

Cheers

[Josh_r32]

ok ive just been told that its not a external gate turbo and its a internal wastegate KKR/Hypergear style turbo. it's not a trust tdo4. !

anyone know what turbo this is? as i wouldt have a clue as i was told it was a td04 lol

Edited April 10, 2009 by Josh_r32

[clip14]

doesnt look like any td04 i've seen. looks bigger than a td04 too...

it has an internal gate actuator on it so unless the flappers been welded shut, it should still work.

[Josh_r32]

ok cheers for the info mate

[hypergear]

Its a T"D"O4 with out the "D". Its a 57 trim T04E in .63 rear housing with .50 Compressor using 76mm comp wheel. Assuming turbo is proper made, its rated 160Ps Diesel application or about 260RWKWs on 98 patrol application.

[Josh_r32]

Its a T"D"O4 with out the "D". Its a 57 trim T04E in .63 rear housing with .50 Compressor using 76mm comp wheel. Assuming turbo is proper made, its rated 160Ps Diesel application or about 260RWKWs on 98 patrol application.

you did wel to get all that from the picture mate lol.

would this be ok on a standard rb20det which manifold it bolts straight onto? or way off track>? ie lagmonster or only good for diesel patrols lol?

cheers

Edited April 11, 2009 by Josh_r32

[hypergear]

It fits stock RB20 manifold with a 5mm spacer. Its not really responsive. But do make good power and torque.