Cap The Hicas Lines On The Rack?

[RB30 Ceffy]

Car is A31 Cefiro w/HICAS. I've done a delete on one of these same racks before and I think all we did was cap all 4 lines by cutting off the fittings and welding the hole on the fitting. I think we had power steering fluid sweating all season and didnt know if it was from us capping the lines incorrectly. Didnt know if that part of the rack lubricates the top gear or if the lines needed to be looped in series to keep the flow or whatever. If any of you guys have done this before let me know what you came up with. Rather do it the right way so I dont have to mess with it after the engine is back in.

Here is the pic. You can see the 4 lines that need to be done with. the bottom two are from the HICAS solenoid and the top

two are the feed and return to the rear HICAS rack. Just to clear that up.

Edited April 6, 2009 by RB30 Ceffy