Jump to content
SAU Community

Recommended Posts

Dan is apparently not able to attend but offered to assist in getting deposits to Motoconcepts (correct me if I am wrong dude).

So just a few days after spending 24 hours up in bathurst watching that lot have fun we can head out to the creek for a bit of a drive.

Who is interested...

carlo

slo200

mmmgtir

kinks?

Oz GTR97V

Mr R32 M-Spec ?

fatz

I'm thinking more like RE540's although to get a set of RE540's + 17x8" rims is gonna cost me like $2200 where as a set of stock 16's with some average rubber will cost me like $750 hrmm decisions.

benm, good news, you can get a set of 17s with re55s on them from me for $2000.

Or you can have my whole car for 27k - Guaranteed 1.55s performance :D

Sorry, can't make this one :D

  • 2 weeks later...


  • Latest Posts

    • Does the car have to stay auto? If so, you might be looking at a ZF swap in future. 
    • Yeah its tuned relatively conservatively being dynoed at 525hp with every bolt on and top end of the motor built wtih HKS vcam and springs etc. 
    • Probably. But keep in mind that all Joshua was saying that because of things like timing scatter, and many other related and unrelated things, tuning too aggressively should be avoided. Hence why both he and I said that fitting the cat shouldn't cause you to suddenly fall into the danger zone.
    • I’m running links ecu and an upgraded crank sensor. So I guess I have less chance of this. 
    • The stock Nissan CAS gets very messy at high rpm, particularly with bigger cams/springs, and most aftermarket ECUs don't do as good a job of filtering the noise as the OEM ECU somehow manages to do. So you get "scatter" in the timing signals that can be really destructive to the ECU's knowledge of engine position. And so you can get spark firing many degrees early, leading to catastrophic detonation events.
×
×
  • Create New...