Jump to content
SAU Community

Super Low Seats For Fat Guys

streatracer
 Share

Recommended Posts

Carbon 34 Grand Master

Carbon 34

Posted
Posted

Im in the same boat, I have a GTT and want lower seats , for a wider load butt..lol

plus

Im 6'2 and on my sunroof car my head is in the roof every bump and the seat is laid back and all the way back on the rails..

R34 GTR seats are near impossible to buy, used or otherwise, plus cost too much

I found east bears on nenguns website ,,, but is there anyone who knows how they fit in a GTT ? or about the super low rails from east bear ?

and what seats are defectable or not? everyone has a different story on ADR rules in adelaide on aftermarket seats and rails

even the ADR seats are defectable according to autobarn, SAAS/DRIFT ones ? even with a ADR compliance print off and sewn on ADR rego

plus GTT seats suck, the silver bit in the middle wears horrible with jeans on.

any one got any ideas , diet is in progress but still to bloody tall

joeyjoejoejuniorshabadoo Grand Master

joeyjoejoejuniorshabadoo

Posted
Posted

if you want a wide ass seat get one of those "drift" brand things form autobarn... they are cheap and wide, just don't blame me when your car spontaneously combusts into a ball of ghey :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Shoota's R33 GT-R RB30/26

      By MBS206 · Posted

      How's your first born doing? 😛 As for now what? Time to forget about it for 12 to 18 months while your go down a totally unrelated rabbit hole... 😛
    • MBS206
      Duncan's V37.......race car?

      By MBS206 · Posted

      Fuse taps are perfectly fine to use, especially when you're adding stuff for your own car, and so long as you're being smart about it. IE, don't throw a 30amp circuit, onto a circuit that is only a small circuit. It's best to add a small circuit, to one that is already quite large. Oh, and make sure you're not going to blow the fuses that are further upstream too! I dislike their use in other applications, such as alarms, telematics/tracking devices etc, as it's far too easy for someone to unplug them and render a system useless. Those sorts of devices I go for wiring in quite secretively.
    • DraftySquash
      R34 GTT Central Locking Pains

      By DraftySquash · Posted

      Fob is all cleaned up and it’s working well!! The amount of Vegemite looking sh*t that was in there is mind blowing 
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      Given it is temporary, I bought a  cheapy gauge mount (which has become enflattened) which I will screw into the existing phone mount Also a first for me; given this is a temporary install I could not think of any reason not to use one of those "add a fuse" thingies to source the battery and IGN power. I had always figured they were pretty dodgy but having a good look at them I think they are a valid option for sourcing power from an existing source without cutting 
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      Finally for now, a bit more work on the transmission temp gauge. I was wondering how Raceworks do a gauge for $100 that autometer want $500 for. No idea about the accuracy of course, but they have cut a few corners that made things hard.  First one I mentioned above, the sender is physically difficult to fit and doesn't work with their own adapters (the extra fittings I used to get the sender into a hose cost more than the whole gauge, lucky I had stuff in the shed) Second, the temp sender wires are way too short. They are shown as 2.7m on the box and I know my routing was long from navigator headlight to driver's firewall back to centre console, but I had to lengthen them by about 2m total - 2 joins in each wire. Also, same with the supplied power loom, they needed about an extra 1m to get the fuse box where I sourced power. Another join in each wire since one end wasn't supplied terminated. I know they could argue that the wires might be long enough depending on situation, but when you consider parts and particularly labour, it would be a very expensive cheap gauge if you can't do the work yourself. And, only a small issue....but it would have been nice if they remembered to tap a tread onto *both* spacers they supplied for the bracket....I haven't had to use the M4 tap often!
×
×
  • Create New...