Where Is This Hose Supposed To Go? R32gtr

[phat25t]

Can anyone tell me where this hose is supposed to go, a picture would be awesome. See attached pic.

[Crans]

looks like its in the correct position.

[reNEGaDe88]

Looks like a small vacuum hose. Will go back into the plenum somewhere. Looks like it connects to a solenoid there. Any bosy else know?

[phat25t]

looks like its in the correct position.

Yeh I know that end is right, its the other end I need to know.

[mitchy_]

there should be a nipple on the back of the plenum somewhere, i'm not sure where it is on a 26, but there is one on the back of the 25 plenum.

and yes, that's for the factory boost gauge

[gazza750]

where the wiring harness wraps around the head to go past the injectors ie the plastic cover with 3 5mm allen key head screwws just under the harness at the back of the head there will be a spigot if u look were the fuel pr gets its vacuum source from its in the same spot at the back of the same balance tube

Edited April 10, 2009 by gazza750

[Stage2]

i thought it should connect to the plenum as it needs to read vacuum/boost pressure?

[phat25t]

i thought it should connect to the plenum as it needs to read vacuum/boost pressure?

I found it! It plugs into a nipple on the rear of the balance tube, which is the tube with the black plastic cover on it above the plenum near the injectors.

Cheers