Jump to content
SAU Community

Recommended Posts

hey guys

just wondering has anyone tried/used the gt3582r on there rb25?

im looking at upgrading my turbo, at the moment im running a kkr480 with 50mm ext gate on 18psi making 240rwkw ran 115mph.

has anyone had issues with the gt3582r internal gate? can they hold boost etc

would it be a worthy upgrade or not worth it? want something with more punch!

Link to comment
https://www.sau.com.au/forums/topic/265130-rb25-turbo-upgrade/
Share on other sites

  • Replies 84
  • Created
  • Last Reply

Top Posters In This Topic

get a 3076, more power, about the same response as the KKR junk :P

hey im chasing more mid range torque plus ya top end power, my kkr i make 1.4bar at about 4800rpm, i want it at 3800rpm if possible. but with the same torque. til redline.

would 3076 make 250rwkw on 14psi? so 18psi could i push 280rwkw and 120mph+?

do they make 3076 internally gated? do they hold boost or creep?

im not really into the mood of hacking into another exhaust housing and gettin a 50mm ext gate welded on again! its why im considering iternal gate

Edited by l0WRB

i have an internal gate 3076, it holds boost fine if you make the dump properly. i'm making 250rwkw at 17psi. all in around 3900 on the road. if i was going to do it again i'd go external from the start

i have an internal gate 3076, it holds boost fine if you make the dump properly. i'm making 250rwkw at 17psi. all in around 3900 on the road. if i was going to do it again i'd go external from the start

oh ok thanks 4 that. see no point upgrading if im only gonna gain 10kw at same boost level, not worth the 2.5g to do it!

i kinda want a turbo that makes 250rwkw at 1bar and perhaps 280-300 at 1.3bar-1.4bar

i had one if not the first 3582r-iw sold in Aus, mounted on my 25

it started out low mounted and then high mounted on a etm manifold, and i loved it.

my car was running a built r33 auto with highstall.

the turbo had a 18 psi actuator with a .82 rear and would see 20 psi between 4000 - 4200rpm

going up a lg hill in overdrive ive seen 5 psi at 2500 rpm, Laggy i think not.

in my eyes this is the same boost response to the 3076, yet the potential for future power is allways there.

i have since sold this turbo and manifold to another SAU member and he with a manual and e85 has produced 380 rwkws,

on a stock motor with lg injectors at around 23 psi.

i think they are the one of best suited turbo to the rb25 you can get.

a wise man "nismoid" once said, a poor man pays twice

so why choose a 3076 to get the same response and less power?

you then want more power so you sell it and get a 3582.

get a 3582 to begin with and do the job once.

as far as internal gate's go above 20 psi,

the 3582r-iw with .82 rear has no boost control issues that i have found when set up correctly.

post-24852-1239583376_thumb.jpg

thanks dangerman! well this is the turbo im really looking at going 2!

i only wanna run around 1.3bar because motor is still stock, motor has run 1.3bar for 2yrs nearly now and no signs of giving in yet lol

where is the best place 2 start looking? price wise etc.

Two things:

1) If you aren't going to get >250rwkw on a GT3076R, then you won't on a GT3582R either - both can flow that power level at that boost level without an issue.

2) A .82a/r GT3582R feels WAY spongier "around town" driving than a GT3076R, saying they respond/drive the same as a GT3076R is ridiculous.

Agreed fully with Nismoid, recommending a .82 GT35R over a GT3076R is basically saying "Why get 280-300rwkw with good response when you can spend the same and make 280-300rwkw with more lag??" There is a dude on here who has cracked 350rwkw with a .68a/r GT30R running E85 on his RB25DET. GT30R ftw.

Two things:

1) If you aren't going to get >250rwkw on a GT3076R, then you won't on a GT3582R either - both can flow that power level at that boost level without an issue.

2) A .82a/r GT3582R feels WAY spongier "around town" driving than a GT3076R, saying they respond/drive the same as a GT3076R is ridiculous.

Agreed fully with Nismoid, recommending a .82 GT35R over a GT3076R is basically saying "Why get 280-300rwkw with good response when you can spend the same and make 280-300rwkw with more lag??" There is a dude on here who has cracked 350rwkw with a .68a/r GT30R running E85 on his RB25DET. GT30R ftw.

im assuming you have a 3076 dyno print out to compare to mine?

or is all that just your personal opinion without actually owning one?

spongier?

the host is asking about drag racing not going shopping

Im glad Lith said it and not me lol...

But come on, a bit of logic.

The larger compressor wheel in the GT35 cannot be as efficient as the GT30. It flows more, and a reasonable amount more too considering the 50-70rwkw

From what i remember in my GT3X days, the rear ends on them are identical, its just the front wheel thats changed... so going to a larger front wheel whilst making more power/flow (clearly), is not going to have the same response.

A dyno print out isnt a good gauge either... anyone can load up harder and get a better curve.

Hey Dangerman hows things mate.

I think Lithium is refering to my HKS3037 on E85.

Heres a plot with Adrians and my car on the same dyno (Willall's)

GT3582 vs HKS3037 .68

Lee

Edit: Picture not working properly but is on the last page of the E85 thread up the top.^^^^^

post-46183-1239679793.jpg

Edited by RB25DETS2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • ADHD in all form isn't about "can focus, or can't focus" or is hyper active or isn't etc.   It's all a dysregulation. Either time feels to be stationary, or time just vanishes in a split second. We are either under focussed on the task at hand (as we're over focussed on our surroundings) or we have no idea an atomic bomb went off beside us as we're so hyper focussed and locked in on things.   Not to mention the rapid fire thought process. What it takes a "normal" process to think up a solution to a problem, ADHD will be able to give you 5 different ways to solve the problem, and the pros and cons of each. While we can be highly impulsive and lack the ability to "control ourselves" we can also become paralysed with the inability to make a decision for ourselves. While most of us have an OCD like requirement for perfection, we lack the ability often to remain focussed to get things to a perfect state. Those with undiagnosed ADHD as adults, can often find the last part actually stops them ever attempting to do things that they have the ability to do, as the reasoning is often "if I can't do it perfectly, it's not worth doing"   As for projects... Ha ha ha, I still need to take the other half of my wall trim down in the Fiance's office so I can paint it. Need to finish digging and running the back yard drains, my R33, getting the Ninja bike registered (now being sold), the moped project, fixing either of the lawn mowers so they're reliable, along with a myriad of other things.   It's why I've been going through lately and just being brutal and clearing projects off that I won't actually ever complete. IE, moped will go to the tip, or be given away, bike is being sold, Subaru project being sold, some parts for other projects given away. Or I've been making myself focus on one thing at a time, by ticking off the smallest quickest ones first.   There's also a reason by our mid twenties we seem to be "know it alls", as we've all been down some of the weirdest and oddest rabbit holes when you follow the dopamine trail. It's often also why we're more a jack of all trades, but not a master of one.   However, pretty much all of my hobby projects, in one way or another, all come back around to automotive. That's my zen area.
    • Remember reading about this not too long ago. been for sale for a long time  this is like when the wife says you need to sell the car so you put it up for a ridiculous price no one will pay
    • You are perhaps suggesting that it is not a super car? Well....it's not an AU.
    • Dropped the MX5 of this morning to get the hardtop colour matched and some PDR done, they are also going to give it a buff to remove some "stubborn" swirl marks and light scratches in the clear coat Over the last few months the poor little thing has copped some shopping centre car park abuse, I try to not park in them, but hitting Westfield's a few times over the last few months has taken its toll, nothing really bad, but enough of a trigger for a "while we're in there" thingie  Once it's back and all the one colour, with a few dents and mark's removed I'll give some of these products a go and see what they're like  
×
×
  • Create New...