Jump to content
SAU Community

Vic: Wrecking Complete 1999 R34 Gt-t

DRFT31
 Share

Recommended Posts

DRFT31 Experienced

DRFT31

Posted
Posted (edited)

Hi guys im wrecking a damaged 1999 r34 manual sedan. Car is classed a repairable writeoff, which mechanically is perfect and still drives with no flaws. Parts which wont be available are manual gearbox, pedals, tailshaft, leather manual gearboot, steering wheel and all manual plastics.

Engine has 95,xxxk's on it and is in excellent running condition. Will be leaving engine complete in car as would like to give people the opportunity to hear it run before they purchase it, once we've agreed a deposit will be taken and engine will be removed. Engine has never been boosted and was recently serviced.

A lot of part which will fit on coupes. Front end of car is very straight, eg front doors guards bonnet and even has the r34 original plastic factory lip.

Car has a what looks to be 3inch front pipe from turbo connected to a high flowed cat 3 then connects to a 3 and half inch exhuast from cat back all mandrel bent. A bit damaged but still has a very nice sound.

Car also has xennon headlights which are in great condition and work perfectly. Also R34 mats available.

R34 GT-T auto will be available soon. All windows also available just rear windscreen gone.

Too many parts to list but if your after anything just pm me with your contact number and what your after and ill will get back to you asap.

Car is located in northern suburbs, Thomastown. More than happy if you would like to view the car.

Cheers.

DSCF0313.jpg

DSCF0312.jpg

DSCF0307.jpg

DSCF0309.jpg

DSCF0306.jpg

DSCF0314.jpg

DSCF0315.jpg

Edited by DRFT31
Link to comment
Share on other sites
  • Replies 104
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • JC71
      R34 GTT air noise?

      By JC71 · Posted

      I will go over it again, a leak would make the most sense and also explain why I have a high idle issue if I plug the iacv in...I have had everything off, inspected, and replaced every coupler and hose in question, new clamps, reinstalled and basically soaked the entire system with soapy water and find nothing... could there possible be an issue with the wastegate rusted open?? from sitting so long? again the air sound literally sounds like a 3 inch open pipe blowing or sucking air, not just a small passage, very strange. it does sound like the turbo is creating massive air flow but like its not being diverted or flowing into the intake/cylinders, it seems to have very low and delayed power. do appreciate the help
    • GTSBoy
      R34 GTT air noise?

      By GTSBoy · Posted

      Boost leak or exhaust leak. Boost could be from anywhere, including manifold/plenum gaskets. Exhaust is frequently head to manifold gasket or from manifold to turbo gasket. Often caused by missing nuts or broken studs.
    • GTSBoy
      Wheel offset has me confused.

      By GTSBoy · Posted

      Check for spacers on the front, in case they've been pushed out a little to try to match he rears better.
    • IXMandalorianXI
      Wheel offset has me confused.

      By IXMandalorianXI · Posted

      I should clarify that the previous owner put the wheels on, so Im not entirely sure what he bought. I was searching the Rota page and found these two as the only matches. It did not occur to me that perhaps they sell these wheels with different offsets. I guess the best way to solve this is to take the wheels off and measure them from the inside to be sure.
    • Kinkstaah
      Wheel offset has me confused.

      By Kinkstaah · Posted

      The offset doesn't really have anything to do with dish directly. I mean it kind of does but it also doesn't, it's only tangenial. The offset is purely how much offset (get it) the mounting face is from the CENTER of the width of the rim. I.e, the mounting face would be directly in the middle of the 9.5inches if it was a 18x9.5 ET0 rim. Given it is a +12 rim, the mounting face is 12mm further away from the center (to the outside of the car). Your fronts are +30, so the mounting face is 30mm further away from the center (to the outside of the car). I would wager this doesn't look right, because most skylines generally have the same with guards front to back. So I'd think your fronts look significantly more sunken in than your rears. I'd wager by about 18mm, or so.
×
×
  • Create New...