Installing Hks Turbo To Rb25det

[Skyline1989]

Hi guys, so i'm just about to change my standard huffer for the HKS 2540 i recently purchased.

all the lines are made up, but i just need to know which water lines need to go where???

oil lines aren't much of a problem as the turbo has 1 earls fitting (oil return) and the other (which is a oil feed has 2 bolts to the end)

so can anyone help me with choosing the correct water feed and return line? just need to know which is which and what it would be on the turbo

cheers

[The Dan]

Hi guys, so i'm just about to change my standard huffer for the HKS 2540 i recently purchased.

all the lines are made up, but i just need to know which water lines need to go where???

oil lines aren't much of a problem as the turbo has 1 earls fitting (oil return) and the other (which is a oil feed has 2 bolts to the end)

so can anyone help me with choosing the correct water feed and return line? just need to know which is which and what it would be on the turbo

cheers

I'd start by changing the oil lines around lol

It doesn't matter which water line goes where. As long as one goes into one side and the other goes to the other side and they both connect to where the original water lines did on the engine

[JonnoHR31]

and make sure the oil feed/return is as close to vertical as you can get it (do this by rotating the exhaust housing and trial fitting).

and as said, dont put the oil return at the top.....

[Skyline1989]

thanks for the help guys,

just found out 2day, which lines go where!!!

and yes, the line with the two bolts on the end is the oil return line u learn something new everyday

i have a custom piece made up which is approx. 7" long and is fairly straight, which will bolt up to the bottom

thanks again for the help guys