Jump to content
SAU Community

Recommended Posts

I want to upgrade the stock turbo on my rb20 det. I have to motor in a 1983 mitsubishi sigma , got the motor from a r23 gtst skyline. i was consedering upgrading to the vg30 det turbo, from the 300zx, the single turbo( ball bearing )300zx, not the twin turbo 300zx.

these are the details and modifications done so far:

stock engine internals

18"x12"x3" front mounted intercooler

2.5" intercooler piping

3"free flow exhaust

IS300 Apexi N1 Exhaust

5frd manual gear box (rebuilt)

exedy street and strip clutch

ecu flashed

mitsubishi sigma 2000 rear end (diff) 4-1 ratio but soon to change to a r32 rear end

iridium spark plugs #9

walbro external fuel pump.

cost is a factor, that is why i am thinking of the vg 30 turbo,

so any help or advice, thanks

Link to comment
https://www.sau.com.au/forums/topic/265670-need-help-rb20-det-turbo-upgrade/
Share on other sites

I got a 71mm .60 comp / .58 65mm Turbine T3x internally gated turbo came off a SR20det test car. This is a very good responsive spec for a RB20det to make upto 230rwkws. Turbo's 5000KMs old, No shaft play, $700 with 12 month warranty. If interested send us a PM.

Well you want to upgrade...but what do you want?

180kw? 200? 220? 260?

Midrange? Top end?

Budget?

well i am looking at the 220 -260kw range, i was thinking ball bearing so i would get minimal lag but good top end, will the vg30 (45v3) turbo work well, someone has one for sale, any info on it? will it be a good upgrade to the t25 i have in now?

A VG30 is pretty much the same thing as a R34 GTT turbo.

220-260 is a big gap. Which is it?

260 will render a large and laggier turbo. 220 could be had by a HKS2530 very easily with awesome midrange.

Just see the RB20 Turbo Upgrade thread, you will find what youre looking for in there.

ok fellaz where reece washi and my self come from (Trinidad& Tobago), its very hard to get those turbors like the r33 or r34 t28 enven the gt30 turbo is hard to get

but there is 1 fella we know is selling his vg30 t3 ballbearing 45v3 turbo

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks for sharing. That's a great video! My buddy is doing the same thing on his build (S chassis struts and towers). He's building an S14 with billet RB30 shooting for 2000whp... a race car with a TH400 just like this video. For a road car I just couldn't go this route as the strut has to be almost vertical and the caster is not going to pivot correctly (let alone camber gain). You think the R32 frontend is bad, wait till you put a MacPherson strut on without modeling it all in Solidworks to check geometry. I'm not saying it's a bad way to do it but I'd be really curious to see how it affects the geometry.
    • Hey Christof and welcome!  Sounds like an awesome project! I'm not sure many of the regular users on here would know much about the HK but I could be wrong.  Looking forward to updates.
    • As long as its NOT a HyperSHITtune, youll be fine.
    • First time visitor and currently getting ready to start work on my HK Premier.  Its all stock, 186 with 3 on the tree.  The only mod i have right now is extractors.  I am hoping to get some guidance on slightly modifying the engine to bring a little more power. Just going for a nice, comfortable cruiser.  The car is very straight, however i have been out of the country for 20 years and its been gathering dust at a family farm.  Will be doing quite a bit of body work to cut out some small rust areas (frnt quarter panels and a few other small bits) and fix up the paint.  Will be redoing the interior (its currently black and the seats are in real need of recovering and respringing the driver side (its front bench seat).  The dash needs a little TLC, but no real damage.  As my heater has degraded I am considering fitting something after-market that will be both heater/AC (recommendations here are always welcome). Wanting something discrete that will allow me to use the same controls and not be obvious once inside the car.   For the engine, i have been told i could consider upgrading my cam (imagine i would need a new head as well) and putting a new carby (currently the original stromberg).  However not sure what is going to be the best route.  Would certainly welcome any comments/suggestions.  As  a final step I am looking at changing the wheels. Current hubcaps are in dire need of refurbishment or replacement (imagine its a bit like hens teeth).  Thinking of some clean/classic looking mags (7-inch should be more than enough - not going for a large change in look).  Welcome any comments/advice and of course any questions. 
    • I got the ARC M079 due to the space constraint.  Been running mint for the last 3 years.  Plazmaman also seems like a really solid choice but not used myself.    Hunt around for a better price but this is what I have - https://www.rhdjapan.com/arc-brazing-intercooler-smic-m079-bnr32.html
×
×
  • Create New...