Jump to content
SAU Community

Recommended Posts

Would you sell rear calipers & pads only?

Yeah mate, will sell them. $250 for the pair with the pads and brake lines and whatever bolts etc hold calipers and associated brackets on

Cheers

are there still seats? if so what condition are they in? if madaz doesn't take the turbos i will

Hey mate, madaz doesnt want the turbos anymore, Do you still want them? $1600 and they are all yours, and you are quite welcome to take them to a turbo place to get a second opinion on them if you wish, but i will give you my word, they are in really good condition, dont seem very old and are complete.

Cheers,

Michael

any chance you still have the front bar? and how much would you want for all of the seats? . cheers

Sorry mate, No good with the front bar,

Drivers seat is damaged( Bent frame and rips in the fabric, Inrepairable i reckon)

Have got passenger seat $250, Have still got rear seat, $100 for that.

Regards,

Michael

Hello guys,

Still wrecking the GTR, keen to sell everything, nothing is too small, switches, trims, rubbers, you name it and i will sell it if i still have it, can post it if its small enough or help organising freight if its too big to post, or you can pick up yourself.

Rear brakes: $250 with rotors

Intercooler: $80

Bonnet: Already white, $450

AFMx2: $80 each

STD water pump: Used but still in great nick, why spend $170 on a new one when you can get my old one for $70

Please note: this is just a sample of what i still have, just thought i would post a few prices up for any1 who is interested

Also, i previously stated that i had a pair of 2860's, i was incorrect and i apoligise, they are actually Garrett GT2560R-5, in really good condition, did a search on the net for them and come up with a few comments.

Dual ball bearing, rated at 320HP each, true bolt on replacement/upgrade for RB26's. HPI has got them in the Top 20 Turbos list in the latest HPI magazine

Regards,

Michael

Hello guys,

Still wrecking the GTR, keen to sell everything, nothing is too small, switches, trims, rubbers, you name it and i will sell it if i still have it, can post it if its small enough or help organising freight if its too big to post, or you can pick up yourself.

Rear brakes: $250 with rotors

Intercooler: $80

Bonnet: Already white, $450

AFMx2: $80 each

STD water pump: Used but still in great nick, why spend $170 on a new one when you can get my old one for $70

Please note: this is just a sample of what i still have, just thought i would post a few prices up for any1 who is interested

Also, i previously stated that i had a pair of 2860's, i was incorrect and i apoligise, they are actually Garrett GT2560R-5, in really good condition, did a search on the net for them and come up with a few comments.

Dual ball bearing, rated at 320HP each, true bolt on replacement/upgrade for RB26's. HPI has got them in the Top 20 Turbos list in the latest HPI magazine

Regards,

Michael

post-61423-1241080866_thumb.jpg[

Hey guys, picture of 1 set of wheels for sale, Sparco multi-stud racing wheels, 2x 17x9+38 suit 255 wide tires and 2x 17x8+32 suit 235 wide tires. Holden/toyota and nissan/ford stud pattern. 1 wheel has got some gutter rash, the rest are in good nick. 10 wheel nuts and wheel nut tool included. NO tires

Came off a toyota supra, would probably be right offset for GTS-T as well

Would be good for 2nd set of wheels with R Spec rubber for your track days.

$500ono

Cheers,

Michael

have only got the left one, 150 coins and it is all yours

cool, i shall see what i can get together

let me know if anyone else is interested

are all the brackets and stuff ok? and is it the projecter type one?

cool, i shall see what i can get together

let me know if anyone else is interested

are all the brackets and stuff ok? and is it the projecter type one?

All brackets etc are good as gold, has had a hole cut in the bottom of the light, very neat hole, almost like factory? Dont know why but both of them had a hole in them whereas my other GTR didnt have them.

Maybe HiD globes installed and they trying not to burn the lense out???? Anyone have any ideas? Looks too neat to be done for no reason.

It is a std GTR headlight, im pretty sure they are projector types from factory??? Any ideas on this one too????

post-61423-1241424904_thumb.jpg

post-61423-1241425170_thumb.jpg

cool, i shall see what i can get together

let me know if anyone else is interested

are all the brackets and stuff ok? and is it the projecter type one?

All brackets etc are good as gold, has had a hole cut in the bottom of the light, very neat hole, almost like factory? Dont know why but both of them had a hole in them whereas my other GTR didnt have them.

Maybe HiD globes installed and they trying not to burn the lense out???? Anyone have any ideas? Looks too neat to be done for no reason.

It is a std GTR headlight, im pretty sure they are projector types from factory??? Any ideas on this one too????

post-61423-1241424904_thumb.jpg

post-61423-1241425170_thumb.jpg

Sorry mate, i thought i put a front photo on too, my bad. yeah it is the bug eye type of lense

Cheers,

Hey mate, did you still want the headlight or not? Have had a couple other people interested thats all. I dont mind holding it for a week if you need to get the money, just please let me know if you dont want it anymore

Thanks,

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Bump on this to not make another post, had a ‘head drain’ leak on me and have the engine out as we speak. Planning on just putting a new freeze plug back in , plug the tapped holes and just be done with that headache.    Now I still want to relieve pressure to allow oil to pass down the blocks returns easier. I’ve seen catch cans with multiple vents help folks with this issue on this forum.  I’m wanting to make my own. I have some pictures here of my setup if anyone can help how I should plumb and design the catch can I would deeply appreciate it !   rb25 Oil upgrades: 1.0mm restrictor n1 pump/billet gears extended crank collar  extended sump with trap doors/w welded fitting    
    • The Frenchy's kit is the way to go forward. A modern compressor that weighs about 1/2 as much, is at least twice as efficient, and will do a good job on R134a. And of course the kit has everything else you need to connect it up and have it work properly.
    • Hey all , I am in the process of having the AC system in my r32 GTST converted from r12 to r134a and I’m being told my compressor has gone bad and I will need a new one. I was wondering if anybody has any suggestions for what is the best route to go aside from dropping $1500 on a new oem one? I did see that Frenchy’s performance garage offers a kit to mount a Toyota compressor, has anybody actually used this kit on their car? Or is there anywhere I could purchase just a clutch? Any help is appreciated.
    • Well, your RB20 ECU loom won't have wires for the boost solenoid, that boost sensor, and possibly one or two other things. There could be differences in seemingly random things like the charcoal canister purge solenoid, because the 25DET has to handle boost in the vacuum system and the 20DE does not. I don't know - I haven't looked. It is very likely that all the most important things are same-same, being the main sensors like AFM, CAS, etc, and the injectors and ignition. Not that you'll need the AFM for the Haltech anyway. I would suggest that you would seriously want to sit down with the pinouts for both ECUs and just go through them and highlight green what is the same, orange what is different/missing, and make a plan from there. It's not going to be difficult. It will either be the same or need to be fixed.
    • yeaaa that's why I haven't done any wiring to the stock ecu harness because I have the haltech, but then that leads me to the other question of "is the pnp harness really plug and play?" or would I have to still switch some pins/wires over because the pnp is for the rb25det neo harness, and not for the rb20de neo harness. was really hoping to find something to spoon feed me since so many people have done rb20neo + t conversions, but man this is rough.
×
×
  • Create New...