Jump to content
SAU Community

Import Survey


skylinecityimports
 Share

Recommended Posts

you need those cars in 3 days or your brother gets it?

you have seen the corvette engined 240z on the net yea?

yeah my mate had a 280z with a 70 cast iron LT1 vette engine in it, but his was low budget rust bucket. Id like a new alloy vette engine in one

more fiberglass then steel model, old dattos rust too easy lol and the short rear end 240z just loves to be sideways on every corner with that much torque

Link to comment
Share on other sites

  • Replies 83
  • Created
  • Last Reply

Top Posters In This Topic

forgot a NSX twin turbo wide body

2009 type R honda civic migen/spoon prepped, painted satin black

nissan cube slammed in the weeds, huge sub wall with more watts then killawatts

S2000 as above

2002 Supra RZ , full tilt fun

E-RUF porsche, 270kw electric car. for greenies

Link to comment
Share on other sites

R32 GTR (Because its the only supercar I can afford)

Lamborghini Countach (Those body lines, need I say more?)

Aston Martin DB5 (Because its just so damn sexy for its time)

Toyota Prius (Because I love electric vehicles and since theres no full time electric, I'll have to settle for a hybrid)

AC Shelby Cobra 427 (Because if you cant get laid in this car, cut it off)

1967 Ford Mustang (The original ponycar, still a killer)

66/67 1st Gen Chevy Camaro (What a sexy mofo)

Mercedes Benz Unimog (Best troop carrier ever)

AH-1 Helicopter Gunship (Because thats how ballers roll)

-D

Link to comment
Share on other sites

R34 GT-t series 2, coupe 5 speed manual, new suspension (no gay coilovers a proper spring and shock setup) uprated brakes just new fluid, pads, and discs, nice set of 18 inch rims, and a simple engine mods to get to a reliable 200 rwkw, front mount, full exhaust, hi-flo cat, and a computer with a decent tune should do it nicely, APEXi RSM (i loved the one on my old car) and that would make me very happy. I could afford to do it right now realistically but i'd rather keep doing motorbike stuff. I'll have another R34 one day for sure though.

Link to comment
Share on other sites

R34 GT-t series 2, coupe 5 speed manual, new suspension (no gay coilovers a proper spring and shock setup) uprated brakes just new fluid, pads, and discs, nice set of 18 inch rims, and a simple engine mods to get to a reliable 200 rwkw, front mount, full exhaust, hi-flo cat, and a computer with a decent tune should do it nicely, APEXi RSM (i loved the one on my old car) and that would make me very happy. I could afford to do it right now realistically but i'd rather keep doing motorbike stuff. I'll have another R34 one day for sure though.

hey that sounds like my car,,lol those mods on a series 2 car produce a bit more then 200kw..more like 230 -250kw.. they use better cams , hi torque models and start off life with 206kw , way more low end torque that you can feel . i know of a car just like mine , same mods only a tiptronic GTT S2 that dyno'd at 245kw on good fuel..might dyno mine someday for giggles.

Link to comment
Share on other sites

hey that sounds like my car,,lol those mods on a series 2 car produce a bit more then 200kw..more like 230 -250kw.. they use better cams , hi torque models and start off life with 206kw , way more low end torque that you can feel . i know of a car just like mine , same mods only a tiptronic GTT S2 that dyno'd at 245kw on good fuel..might dyno mine someday for giggles.

mates r34 had the same mods and pulled 191kw on a mainline dyno!

Link to comment
Share on other sites

well my bog stock series 1 r34 pulled 157 rwkw from memory, so i think around 200 would be enough for some fun. Personally i'd rather spend 5 grand on handling over 5 grand on power but i've always been a corners guy.

Link to comment
Share on other sites

bought plans for one of these Porsche 914 Chalon kits back about 15 years ago only a wide body V8 model,,, Had one flog me into submission on the race track once when I ran my RX7 and 1200,, so bloody fast and handled really well for a rear engine v8, and cheap to buy back then, looked hot with lambo wing on it, no roof targa

23778120002_large.jpg

series 1 R34 didnt come with 206kw stock, only S2

The new Neo engine has a considerable torque improvement; 343nm is now achieved at 3200rpm the previous nissan skyline had a maximum of 295NM at 4800RPM, outright power was also improved to 206kw. Changes to the engine included a new NEO head which contains solid lifters and revised variable valve timing A slightly larger exhaust housing on the turbo is used to improve flow, and the compressor wheel is now made of Nylon to reduce lag. A larger side mounted intercooler

but I like corners, and decent power. and a good stereo...lol if I wanted a race car it wouldnt be a skyline GTT for my first choice..lol

Link to comment
Share on other sites

series 1 R34 didnt come with 206kw stock, only S2

That 206kw is at the flywheel too, so subtract a bit for rwkw. Mine has pretty much the exact mods that Kralster mentions and makes just over 200, to go any more you really need a bigger turbo or highflow.

Link to comment
Share on other sites

Well seeing as the title says "import vehicle" ... I'd like:

MV Agusta F4 Claudio Castiglioni edition Evo! :P

$120,000 (only 100 produced)

1078cc F4 motor

147kw and 125Nm @ 181kgs

Top speed 355kph!!!

And mountains of Brembo and Ti goodies!

MVAgustaF1000CC071.jpg

MVAgustaF1000CC072.jpg

;)

Link to comment
Share on other sites

My best import vehicle? 1998 Nissan Skyline R33 GTS25t Series II Type-M 40th Anniversary Edition :dry:

pfft 40th anniversary.....thats whats called mid life crisis isnt it

My best import vehicle?

would have to be my 1993 R33 GTS25t Series 1

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share




  • Similar Content

  • Latest Posts

    • So.... when I'm finally getting around to having my power steering leak sorted, now it looks like I've got the same issue most A/T Skylines are having. My A/T light will randomly come on and I'm stuck in 3rd gear until I turn the car off and on again. Only 3 weeks ago I did a complete transmission service: Oil flush + new gasket + new filter. This came out of nowhere!! It wasn't like the car was driven hard. I drove about 3 mins down the road to get fuel and boom!!!  Anyway, I have a few questions and hope you fine people can help me out here. All questions are in red. 1. The solenoids: I was looking at the parts catalogue in Amayama and I could only find the Solenoids as an assembly. https://www.amayama.com/en/part/nissan/319404ax05 I read in another thread that Solenoid A = 31940-4AX02 & Solenoid B = 31940-4AX05 but the Amayama product has only the code of B. Is this the right part? Can anyone who has done the Solenoid changes or seen them confirm if this is the complete set of A & B?   2. Gasket and Filter: I'm not going to try change the solenoids myself because it seems difficult to do in a home garage with just 2 jack stands. I plan to take it to a shop and get it changed. I was also going to buy the transmission sump gasket at the same time so I don't reuse the same gasket. Should I just use the existing gasket as it has only been on the car since OCT 19th? (~3 weeks) Should I be buying a brand-new gasket and a filter? Does this job involve taking the filter out?   Thanks in advance to everyone. It's hard to find a video of someone doing a solenoid change on a R34 so any help you can give answering my remaining questions would make me less stressed.
    • Yea - From what I have seen from the video, the car idles like any R34 lol 50PSI of fuel pressure is hardly super abnormal, the regulator is working because the pressure remains static when the throttle gets revved, i.e pressure remains the same when manifold vaccuum changes. Bigger pumps on stock rails always bumped the pressure in the rail without using an aftermarket regulator to change that. Do you know what your IAC is actually doing? Has there been any data showing the stepper motor % etc? There's no way your idle is actually moving around the way the cluster(s) are indicating. You would hear the difference with the engine RPM flying to 3k and 1k in mere seconds. I'd be checking the wiring to the tacho. What the tacho is telling you and what the engine/ecu is telling you are different things. I assume your ECU doesn't display the spike. So whatever is telling the tacho to be at X rpm is doing something weird. When the going gets insane, you're on the wrong path. You've ruled out plenty of things that are working correctly/aren't the issue. Your idle isn't doing what the tacho is indicating. You have two seperate issues, I don't think they are linked, and the idle seems reasonably okay unless it's stalling which.. well, it hasn't. Troubleshoot the stall if it occurs by figuring out what your IAC is doing vs what it is being told to do.
    • So awesome! I love the RB with the exhaust on display.
    • NO HITS PRICE DROP   ENGINE - $8.5k ONO TRANSMISSION - $1.8k ONO  
    • If it has had a code in the recent past, the code should still be there waiting to be read.
×
×
  • Create New...