Jump to content
SAU Community

Recommended Posts

Yoshiro the Import Monster has decided that it's time for a patented, world first MONSTER SALE!

Until Saturday 2nd of May, the Monster is heavily discounting everything in stock in Australia!

When pressed to tell us why he wanted a sale, he had so many reasons that it was impossible to say no! New stock coming in, a strengthening Aussie Dollar, beautiful weather – you name it – so here it is, Import Monster's MONSTER SALE

Come and grab a bargain as the Monster has cut prices heavily on everything currently in stock in our Aussie Shop!

Watch this thread as more will be added over the coming week, with a fresh container load hitting the factory floor some time this week. Everything on this list is in Oz now and ready for pickup, or can be shipped fully insured oz wide nice and cheap!

This is a genuine sale, so if you've been eyeing anything off, now is the time to secure it!

I will be doing special forum dedicated specials all week and the first is an absolute cracker! Strictly first come first served, no holding things - whoever pays first gets the goods!

SOLD 18" VOLK RE30 to suit GT-R. Regular price $3600 – Monster sale price - $3100. SAU SUPER DISCOUNT PRICE - $2900 shipped anywhere in OZ! SOLD

http://www.importmonster.com.au/shop/produ...products_id=827

18" x 10.5" Volk RE30 to suit GT-R – regular price $3780 – Monster sale price - $3200! BARGAIN!

http://www.importmonster.com.au/shop/produ...products_id=894

18" VIP RIMS – were $1500 – now $1250!

http://www.importmonster.com.au/shop/produ...products_id=804

18" Genuine Impul NS-GT – were $1900 – Monster sale price $1500 only!

http://www.importmonster.com.au/shop/produ...products_id=840

18 x 10" Volk GT-C – were $4200, now $3600!!!

http://www.importmonster.com.au/shop/produ...products_id=868

Proud connection MASSIVE DISH!! Were $1800 – now $1500!!

http://www.importmonster.com.au/shop/produ...products_id=836

Work Euroline DH BIG DISH! – were $2850, now $2400!

http://www.importmonster.com.au/shop/produ...products_id=884

18" Work Meister S2R – were $1950, now $1600!!

http://www.importmonster.com.au/shop/produ...products_id=662

18" Work Meister S2R (set 2) were $1350, now $1100 That's what these cost EACH when new!!

http://www.importmonster.com.au/shop/produ...products_id=651

SOLD SOLD 19 x 10.5 Volk Progressive ME – were $3300 – now $2900!! - these cost $5k brand new!!! SOLD SOLD

http://www.importmonster.com.au/shop/produ...products_id=706

19" Work XSA02C Wheel PORN! Bargain at $3400, sale price of $3000!

http://www.importmonster.com.au/shop/produ...products_id=680

18" Cerumo by RAYS – were $1600 – now $1000 only!!!!

http://www.importmonster.com.au/shop/produ...products_id=167

Work VS-XX nice dish! Were $2300, now only $1900!!!

http://www.importmonster.com.au/shop/produ...products_id=828

SOLD Stagea Ganadors – were $460 – now $400! SOLD

More being added soon!

STAGEA GANADORS SOLD!

SOLD SOLD 18" VOLK RE30 to suit GT-R. Regular price $3600 – Monster sale price - $3100. SAU SUPER DISCOUNT PRICE - $2900 shipped anywhere in OZ! SOLD SOLD

Is the euroline se and ls406 still for sale? What specs are the ls406?

Hi Mate

both of those sets are now sold, but if you're after those sorts of numbers, how about the Work XSA 02C?

http://www.importmonster.com.au/shop/produ...products_id=680

19" Work XSA02C Wheel PORN! Bargain at $3400, sale price of $3000!

Sale ending midday on Saturday guys, grab a bargain while they're still available!

New additions!

BNR34 GT-R Factory rims

Normal price $1900 - sale price $1700!

http://www.importmonster.com.au/shop/produ...products_id=877

19" Volk GT-C in GT-R Fitment - face 2, gold centres. Tough!

Normal price $3600 - sale price - $3100. Includes nuts and centre caps - tyres not included.

http://www.importmonster.com.au/shop/produ...products_id=876

Also just received into stock an R33 GT-R halfcut with 71000kms. This will be stripped and parted out.

So far the indicators in the guards and bumper are sold, the cam covers and cam gear covers are sold. the guards are spoken for and the bonnet is gone

The front bumper is damaged, but looks repairable - I will get detailed pics over the next few days

The centre guage cluster of three dials appears to be a Nismo item (says Nismo on the centre dial) but the dash cluster of speedo etc is just normal stock gt-r)

Major items for sale

Brembo Calipers/lines/pads - $1100 (disks are cactus)

engine/loom/ecu - complete with all ancillaries, not including cam covers etc $3800. 4 week warranty

Gearbox - $1500 - 4 week warranty

Please pm for other bits and pieces :P



  • Similar Content

  • Latest Posts

    • It only looks tidy, as most of the stuff that was on the whole back wall, is now in the trailer to go to the tip, or has been shoved in my 2.2x2.4m "Spare parts room", and now I can't get to anything in there Ha ha ha I could definitely do with a bit more space, but I'd just end up with your problems I'm going to enclose the car port beside the garage, and move a lot of stuff into it I think. OR... It will be setup as a fabrication area, and the main garage will have parts storage in it. I'm not sure yet... Need some pictures of that big shed you've got with the bikes and Skyline in
    • No. I think it's gone. 😭 I think you can get body coloured ones on eBay so I think I'll get one of those... Or just hang a red ribbon from the hole and whack a TOW sticker next to it.
    • Can't say I've had a bad experience with one on my car, then again it only gets washed once or twice a year... The wheels on the other hand, get a good spray often due to my shitty dusty pads.
    • @MBS206 thats pretty neat and tidy to me!  I'll get a photo of mine when I'm out there next. It might require multiple photos to understand the scale of the atrocities though... In total I have 4 sheds of varying sizes and layouts. Main shed is 14x8, second shed is 3x8, third shed is 11x2.5, fourth shed is around 6x4.  All are pretty much full.   The main goal of my cleaning tsunami is to make the main shed predominantly car and motorbikes only. Second shed is my metal fab room (2 x bench grinders, drill press, bench belt sander, metal band saw, scrap metal storage and some of my garden tools.  3rd shed is more bigger garden stuff, storage for engine crane, jack stands, concrete grinder, concrete mixer, air compressor lives there, and it now has two 2mx2m pallet racking shelves with itemised boxes holding building stuff, electrical stuff, plumbing stuff, etc, etc.  The 4th shed is Ryobi electric ride on mower, mini boom sprayer, ancient Kubota tractor, more garden stuff!  I have got a lot of shit....  Then there's the pool house (8mx4m) and the pool pump shed (4mx4m).  I built all of the sheds over the 11 years we've been here.  The main shed was a Ranbuild kit, the rest are all custom made to fit the areas available. Building the main shed taught me a LOT as I had no idea about building anything prior to that!  I've still got one more in me. It will be my man cave which I poured the extra concrete for way back when I poured the concrete for the main shed. The idea is the Skyline will be a centre piece of the main cave once (if...) it's finished.  I told my now 14 year old son yesterday that I will 100% drive him to his year 10 formal in 2 years. Still a long way off but at least I now have a date to work towards! 🤣
    • Modern oils are amazing. Add tyres to that as well.
×
×
  • Create New...