Jump to content
SAU Community

Recommended Posts

Hey Everyone,

Just a quick question regarding my handling as its gettin me a little concerned.

Has anyone had this issue with their r33 as well or have any ideas what this could be?

When im driving it feels as if the rear of the car is swaying from side to side.

Appreciate any feedback guys

Regards

Michael

I suggest you check your tyres...are they too worn? I just to get heaps of rear wheel fishtails when I had worn out tyres...spend the extra cash on your tyres for safety...

I only get that problem when I'm trying to push the throttle through the firewall, I'm in 2nd gear, and it's wet.

Besides that nah haven't noticed it. Make sure your HICAS is plugged in and functional.

Try turning off HICAS all together, pull the fuse and the plugs(under car). I had this stupid prob where my HICAS was not functioning properly and felt like i was oversteering when taking corners slow on wet days(which i found out later it was acutally the HICAS doing some extra turning for me). Sometimes even "swaying" while driving straight on a wet day(whn driving alittle harder thn ususal). See if that works for ya

yeah there could be a number of things. drop by pedders for one of their 14$ checks and see what they tell you. I'm sure they won't miss anything that is worn and needs replacement

yeah it happens to me to, only in the wet and when its raining,

ill be driving along at around 70-80k's and feel the car sway side to side, feels like its loosing traction a bit, and at that speed unexpectedly; its a bit scary lol, especially when you notice all cars behind you move away and overtake =].

I think it is the tyres though, although mine are less than a year old and are pretty much bald...and for this set of tyres i havent been doing anything stupid like burnouts or anything, only thing that would of demolished them would have been doing the advance driving course.

The arse end was moving around on mine a fair bit.

It was two things.

1. Left hand rear hicas tie rod ball joint was shagged causing the rear to tramline when cruising and at WOT.

2. Subframe bushes were shagged (leaking) causing the car to feel as if it was steering from the rear under hard throttle only. On the dyno I could see the subframe pushing forward.

I locked out the hicas and removed the hicas lines to the rear of the car, if you have an R32 gtst be sure you fit a power steer cooler if you remove the hicas lines as you'll find the steering will become a little stiff as the temps increase on hot days and when giving the car a hard time.

Edited by TheRogue
  • 2 weeks later...

The exact same thing is happening to me.

I am getting and have been getting it for awhile, noticeable lateral movement over the rear tyres, only on certain uneven surfaces.

I have read on these forums of that being a hicas issue. BUT this is server swaying and only happens occasionally.

Took it to pedders, they were nice enough to hold onto my car for an hour or two, do a few 'blockies' and proceed to tell me it's all good. (Didn't surprise me when he didn't ask to be paid)

Also on a side note my rear right is toeing in with a few degrees of negative camber(can take a photo) and I am only seeming to spin the rear left wheel now too.

So it's off to a new suspension shop and try to get someone with an idea to fix my car then the diff than the......

  • 2 weeks later...
  • 2 weeks later...

+1 for HICAS issue.

I'm driving a WGNC34 and experienced same symptom. All the sudden the car's rear end becomes wobbly, it feels quite nasty especially at speed of 100km/h+.

Mine had some HICAS issues back in last winter, the dash light lit and steering became somewhat odd, hard to describe. Back then I found that the main position sensor of HICAS did have marks of damage (it's basically the lowest part of the car near the diff and can be easily damaged when driving on rough surfaces, gravel or icy snow). The main angle sensor (the one right next to HICAS motor) was cracked on the base of connector and I fixed it then and all went well for a long time but... Well, today the same problem occurred and this time it was very unpleasant. Rear wheels from left to right on random intervals and on every driving speed, usually HICAS comes on when driving something like 60km/h+ but now freaked out all the time car is moving.

As I have to drive daily I didn't have time to start checking sensors or the motor, I just disconnected the motor connector and left the whole HICAS off for now. I must continue with the fault diagnosis whenever I have the time. Luckily I have another working ECR33 HICAS to change sensors if needed. :woot:

And for the record, I have fair shocks, brand new tyres and steering angles adjusted not long time ago.

If anyone has ideas of how to continue with the inspection I would be happy to hear. :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi All, New member here, I've joined to help my son with an issue that is truly doing our heads in. I'll start with a bit of an overview. Chris carried out some modifications to the engine to try and extract just a little extra power out of the motor and make it a bit more efficient. Previous to this work, the car already had an upgraded exhaust, increased boost up to 14psi, modified standard turbo to metal impellers and slightly oversized, upgraded fuel pump, been dyno-tuned at JEM, and some other bits n bobs like coil packs etc. Before the current mods it was making 236rwkw at 14psi but after the new mods it now makes 209rwkw at 14psi. The work he carried out is as follows, timing belt service, water pump replacement, return to sump radium catch can, had oem head rebuilt and machined 0.2mm, fitted Athena cut ring head gasket 1.2mm thick, arp 2000 head studs, added rear prp head drain, added an external wastegate 40mm turbosmart welded off the stock manifold and plumbed back into a 3in dump. The car has been on the dyno and apparently the ignition is working, fuel flow and fuel pressure is fine, injectors are fine, spark plugs are working fine, Maf is working, O2 sensor is working, TPs sensor is working, VCT is working, CAS is working, boost leak test showed no boost leaks, compression test first crank cold 135psi and got to 150psi across all cylinders once cranking, timing is confirmed at tdc with a dial gauge and the cam dots line up, no blockages in intercoolerm throttle body or pre-turbo intake, no blockages in exhaust, cat conveter or down pipe, turbo looks fine and spins and wastegate looks fine and is new. Soz for all the detail but after all this, it has been in 3 times for dyno and each time comes back stating it's not going to make power. After the first (or second, can't remember now) trip to dyno we did find the timing out by one tooth and this improved things, but it is still well down. Does anyone have any ideas?  Any replies much appreciated as we're just not sure of which direction to take this. Regards Rob (Chris's Dad).
    • That's just a gauge, with a certain amount of electronic damping, and no-one cares if it is timely-accurate. I'd hesitate to use it for an ECU MAP input without knowing that it was a nice signal. Responsive but smooth. Not laggy. Not lumpy.
    • Took the dirty BMW to an actual drag meet so I could do a legit full pass on a sticky enough track and had a quiet goal to try and beat my PB in the old R33 GTS25t The time to beat:  R33 on stock RB25, Internal gate GT3076R on stock manifold tuned to about 17psi on BP98 and running on drag tyres: F20 M135i with intake, dump pipe and MHD OTS Stage 1 tune on street tyres - didn't even drop the tyre pressure: Kinda similar, and kinda way different
    • Isn't there a fitting on the back of the balance tube? That's what the OEM boost gauge uses.
    • Getting a decent signal from all 6 throats is a challenge. I don't know for sure, but I suspect that the stock balance tube is not ideal for it. I have done it on an ALFA 4 cylinder (about 35 years ago, so don't ask for too many details). We drilled 4x holes in the manifold runners, put in some fittings and ran hoses to a decent sized (I think it was about 20mm diameter) pipe that ran the length of the inlet manifold. So, it was quite a decent volume. There is a "tuning" balance to be found between the volume of the common plenum on such a thing and the diameter of the pipes running from it to the runners. You need the volume to be large enough to damp out the sharp spikes in pressure signal you get as each runner gets sucked on by its cylinder, but not so large that it becomes too slow to respond to actual changes in MAP. And you need the hoses to be small enough to transmit the signal quickly, but not so small that they delay the signal. You might have to have more than one go at it, if there isn't any actual success based wisdom to be had here. Hopefully there is. Anyway, I would not do it on only a couple of cylinders. I would also not care about "permanently modifying a part". Just bloody drill holes and make stuff better. There is nothing sacred about any GTR unless it is a genuine museum piece that you shouldn't be modifying at all anyway.
×
×
  • Create New...