Jump to content
SAU Community

Recommended Posts

Had the same thing happen to me around 20yrs ago, early morning, going to work, wet road, crest of a hill and a truck.

I swerved missed the truck, clipped a tree and flattened off the entire l/h/s of my wagon.

No witnesses, no admission of guilt, no damage to the truck...If i'd hit him I'd have had a case, but at what cost?

I'd totally forgen about that...no rage like old rage ROAR!

cause i drive trucks every day. try driving your car for 10 hours.. im not sure if youve noticed the stop every two hours cause fatigue kills advertising.. of course not.. your too busy being very cautious on the roads.. which cause more accidents then a normal driver driving.

So have you actually done anything about it?

Col that sucks mate. Is there anything you can do when something like that happens? I've had it happen to me in my skyline as well. But it was a twit of a woman in an EL falcon driving all over the loose stuff on the highway. I was just glad it was the windscreen and not a headlight or something...

Its ok, Im just happy it did the damage to the windscreen and not the panel work...

My insurance allows for one windscreen per year with no excess or increase to policy... :/

cause i drive trucks every day. try driving your car for 10 hours.. im not sure if youve noticed the stop every two hours cause fatigue kills advertising.. of course not.. your too busy being very cautious on the roads.. which cause more accidents then a normal driver driving.

So have you actually done anything about it?

You know what, if a truck driver drives for 10 hours a day just to meet deadlines yet is falling asleep at the wheel or is too distracted due to driving for such a long period, then he is at fault, regardless of whether he has deadlines or not.

Naturally that also depends on other vehicles involved but think about it, meet deadlines vs avoid killing people, its tough yes, but at the end of the day it is in their hands.

It sucks that most truck drivers get tarred with the same brush, but at the end of the day it isn't a minority causing problems on the road, its a majority, and the sad thing is, so many truck drivers (not attacking anyone here) are dumb people and lack common sense, i can say that because i work with them everyday and it can get stupidly irritating to talk to them for more than 2 minutes at a time.

I've had my fair share of incidents with truckies, nearly gotten run into a wall coming home from bris airport becuase he didn't want to slow down and let me infront from a merging lange when i was already 3/4's of the way up the length of the truck already ( had to flat stick it to get past becuase i seriously don't think i had time to slow down, and of course the douchbags are lookin at each other laughing and crap)

<br />Come on. I'm not standing up for him. <br />If you read my reply, you'll see I agreed that he didn't see you.<br />BUT that's not much use to you if you're DEAD.<br />Wake up.<br />I'm not wasting any more time here, obvious you're on the organ donor list but you just haven't realised it.<br /><br />
<br /><br /><br />

Mate, obviously you didn't look at what times our posts were posted. I wasn't even replying to you....

And if you read my first post you would have read when I said the only reason that I was able to avoid having an accident was because I was on my BIKE. If I was in my car I may well have not been sitting here right now, but rather in a hospital bed or worse.

It seems that yourself and other truckies are a little to happy using the 'bikes are hard to spot' line as an excuse rather than being extra vigilant at all times as you are supposed to be.

Oh and secret6 - I have driven cars for 12, 14, 16 hours and more at a time on quite a few occasions. Driving interstate from Brisbane to Adelaide and other places. Damn trucks are the ones that have caused me any grief on those drives as well.... Ie me doing 105 in a 100 zone with a Semi sitting right up my ass. Not clever driving that is it? So what do I do? Pull over and let the dickhead with his 10 hour deadline and I'll smash anyone who gets in my way attitude past.

My windscreen needs to be replaced after yesterday thanks to a truck out the back of yarraman (near blackbutt)...

He strayed off the edge of the tarmac into the rocks and bang, smashed windscreen at 110kph...

I was pissed to say the least... :D

You might mean "MC" licence... :)

There are 4 levels;

* LR (Light rigid)

* MR (Medium rigid)

* HR (Heavy rigid)

* MC (Multi combination)

Correction col there are actually five type of licences.There is also HC which is heavy combination, this one comes before MC but after HR.

As with your windscreen i have heard of if you do get a truck flick up a stone they can in some instances be payed for by the truckie or the company,all you got to do is record there rego ,company details (which is written usually on the truck somewhere)and give em a call.seen this happena few times.

Jase i do feel for you when it comes to being cut off from one of these big machines , i have so a few times, but go jump in one with someone and see how easy it is to drive one,they aint that easy man, and some of them have a bad blind spots.

Its ok, Im just happy it did the damage to the windscreen and not the panel work...

My insurance allows for one windscreen per year with no excess or increase to policy... :D

The beauty of shannons :) ,Good to get a free windshield every year.

Correction col there are actually five type of licences.There is also HC which is heavy combination, etc etc

Yeah I just see that now...

Its an weird licence, its normal HR plus the following clause;

"a specially constructed vehicle weighing more than 8 t GVM with or without a trailer"

So its for over sized HR trucks with a combined weight over 8t empty...

Best I can think of is like the special single trailer trucks which carry the huge mining vechicle tyres out west...

The beauty of shannons :D ,Good to get a free windshield every year.

Im not with shannons, but yeah many insurance company's provide a wind screen replacement in their policy for free...

Like I said im just happy it didnt hit the cars bonnet first...

past two years mark.. Much better job than the last.. except have to deal with tossers on the road.. haha..

This thread has lost its novelty now.. its all about i'm so way too careful on the road, i shouldn't have to take note of what other people are doing.. cause i'm driving way to careful and they should see that, so they shouldn't have an accident with me. Sounds like you really drive a volvo honestly.

Sorry.. i should stick on topic..

SO.. did you actually do anything? or you've just kept it here..?

Edited by mtopxsecret6

I've been to the cop shop here 3 times and there hasn't been a cop there once! lol. Beauty of living in a small town I guess. I don't have loads of spare time to sit down there waiting for them to get back to their station either.

The last time I went though I did speak to the administration and was told that because I didn't have a witness to the incident that there isn't much the cops can do. I left my details and the rego of the truck and was told an officer would contact me, but that hasn't happened yet either. Seems like if there's not a buck to be made they don't really give a crap unfortunately.

I guess I'll try again after work and see how I go.

That's not a bad idea actually. I'll give the cops one more go first though. They are actually usually pretty good out here in general so I can't complain too much...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wouldn't be concerned at all, other than to suggest having them flow tested when you receive them to confirm they are reasonably similar, and then put the highest to lowest flowing ones in cylinder 6,1,5,2,4,3
    • I’m only posting this cause I thought I had seen a bad review on these somewhere before. Any feedback? Would you guys recommend that if I do buy these I send em to RC to have em checked before installing. Or any other suggestions?   https://www.ebay.com/itm/114009965865?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=JDl-15yLQ8C&sssrc=4429486&ssuid=QTzlFXB1S-S&var=&widget_ver=artemis&media=COPY
    • They see me rollin' they hatin'....... Took me most of the day to make the necessary mods to the mounts to make them fit the car.  Fortunately I was able to just use the mounts that came with the rotisserie. The rear ones are really secure, the front I feel i might reinforce a bit more as it doesn't seem like enough attachment to the vehicle. I'm sure it's fine but better to be safe than (extremely...) sorry.  I drilled and tapped thread into additional M12 holes to each car mount where it attaches to the rotisserie as an extra fail-safe. Without them the side to side movement is just restricted by the allen head pinch bolts, nothing actually goes though the beam. Does now! I still need to adjust the rotisserie to get the car centred in terms of centre of gravity. If it's too high or too low relative to the rotational centre line of the car, it will be like a turtle and roll onto its back or as it currently sits, I dont think I'd be able to rotate it as it sits as it needs to lift the whole car up as it rotates. Ain't happening... I'm going to be nervous as hell the first time I go to spin it on its side...    
    • Oh yes done this when the window started flopping around.  Turns out the guides that run along the rail chanel had crumbed way. Took off the door card and pulled out the window mech, then the window, which you have to pull out through the top. As said unbolt the guide rail and don't spend 30 minutes getting frustrated trying to find a way to slide it out upwards cause that don't frigging work. Drop it down and out through the door hole. All I did to repair it was slice some 10mm clear plastic tube, vertically, then screw it to the guide rail both sides. This tubing rolls inward on both sides and leaves a gap wide enough to hold the window. To finish all I did was lube the plastic tube with olive oil and Bob's your uncle . . . well if he has the operation he can be your Aunt ! !  10 bucks in plastic tube and another 5 minute job done again . . . . YEH BULLSH#T ! My love for Skylines knows no bounds !
    • So was there a solution to this problem? I’m having this issue now. 
×
×
  • Create New...