Jump to content
SAU Community

Recommended Posts

hi,

what are the benefits of fitting an oil catch can? i know sweet f.a. about them and what they actually do.... the general idea i got is that they effectively remove oil from the air travelling between the two breather pipes by dumping the air into the can, the oil falls to the bottom, and the clean air returns to the breather.... is that more or less what they do or am I way off :-) are they worth getting, and what positive effects do they have?

any advice would be great.

Link to comment
https://www.sau.com.au/forums/topic/26662-oil-catch-can-on-an-rb25det/
Share on other sites

r33per I use mine to remove the recirculating foul air that comes from the crankcase. Turbos get a lot of blowby the rings at high boost which is an AF mixture, exhaust gas and atomised oil from the stirring and stuff in the crankcase. These things are detonation inducers and lower potential max power and can bring on detonation. I vent mine from the catch can, through a filter, to the atmosphere and not back into the pre turbo/post airflow meter pipe. Recirculation is done for emissions so this is prolly illegal, but so should be pushrod v8's :P

Makes sense to me to get rid of the waste and I'm a Mechanical Engineer and was a Mechanic before that.

excellent, cheers man. so those little micro-pods on catch cans actually filter the air LEAVING the catch can, and without a can, the air from the crankcase just gets recirculated into the intake? ewww....... so correct me if i'm wrong.... but the two breather pipes from each side of the head both push their crap out back into the intake?

sorry for all the q's, i'm just trying to find out as much as i can about how they work, what they're good for, how to install one etc

Originally posted by grimr33per

so correct me if i'm wrong.... but the two breather pipes from each side of the head both push their crap out back into the intake?

at a guess, they should also be connected to a hose that comes from the block, and the air should go into the plenum?? im guessing. but thats whats supposed to happen for it to meet emissions regulations. dont have a car here at the moment to check for you :P

Your right about the coke bottle, keep the costs down. I race, and the only reason I keep my machines clean is to maintain cred at the track. Pretty cars generally don't get worked or have had too much spent to risk an off, while a filthy machine infers no pride, but each to their own.

Watch though if you start blowing heaps of oil out the breathers, means something bad like cracked rings, or pistons (4 of them) :P

I recall there is no crankcase hose though on a 33, but a return line from the turbo oil is there.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Most of the industry in North America either runs on Siemens or Allen Bradley. I have two redundant S7-1500's on my desk right next to me for simulation. Siemens has been losing ground though since Stuxnet, as cybersecurity is a big thing. In my line of work that is federally regulated, you must by law have a cybersecurity management program in place and its audited and inspected every so often.  I work with Emerson PLC's daily (RX3i's) and have done large biogas/refinery projects with their DCS's. Their PLC's are somewhat OK minus the way they do PLC redundancy (You have to download on both PLC's separately every time you make a change )  As for their DCS's... you'll be limited financially first before anything else stops you. Costs are exorbiant at roughly 10x what it would cost you to do with any other system (e.g AB PAC).  1990's, those suckers are brand new haha! Kraft-Heinz (An old client when I use to work for an ESP) still runs Siemens TI505 PLC's from the mid 80's. Ohh how I don't miss working with those... you could only do a certain number of online downloads until it's "Change" buffer would be full and you would then need to go offline to do a full download. There was no warning of when this was coming up and it generally would happen when you would go in at 2am to make changes before production -_-.     
    • Unfortunately, not only is that not the case, one of the main "Selling points" of safety over comms is they clearly state in writing that there's no need to segregate safety networks from non-safety networks. It always gets intermingled with everything else on an ICS/OT network. 
    • Hello. I have an a31 cefiro but since I am in Turkey we have a CA20S engine. I did some research. Then I found that I can swap with a ca18 but when I heard that it has the similar substructure as the s13. I thought I can swap with an sr20 because the sr20 was used with the s13. So can I easily swap the sr20 on my cefiro or is it difficult? 
    • I used to love stock take. I used to take f**k of a lot of stock. /Rodney Rude.
×
×
  • Create New...