Jump to content
SAU Community

Recommended Posts

hey i have recently converted my car to manual and now when the car is going to take off it feels like the clutch isn't lined up 100% and there is mad vibration going through the tailshaft! enough to hear it knock on the tunel a couple of times.

anyway i called my mechanic and explained the situation and said that the clutch couldn't be lined up incorrectly or it just won't work at all, he then explained it could be a warped fly or pressure plate also about ceramic something rather could cause vibrations, but it is an organic clutch soo that was ruled out.

just need to know if i have installed the clutch slightly out can it cause the problem? can i just get it re-aligned?

any info helpful

cheers

jason

Link to comment
https://www.sau.com.au/forums/topic/266690-clutch-issues/
Share on other sites

Your mechanic is basically correct - if the clutch assembly isn't aligned correctly, then the gearbox just will not go back on.

Did you disassemble the driveshaft during this swap? Or is it a different driveshaft from the original?

Link to comment
https://www.sau.com.au/forums/topic/266690-clutch-issues/#findComment-4551097
Share on other sites

same shaft as before,

another mechanoc mate says it could be the spigot bush? but it runs fine with clutch out.

steps i am taking now is machined flywheel, brand new clutch and getting a mech to assemble the clutch.

fingers crossed!!

any other suggestions??

Link to comment
https://www.sau.com.au/forums/topic/266690-clutch-issues/#findComment-4552119
Share on other sites

did you know the history of the gearbox you purchased?

sounds like it could be the rear main shaft bearing.

if the bearing is gone, it can allow the shaft that your tailshaft connects to to move.

hence causing movement and vibration. put it up in the air and try moving the front of the tailshaft by hand, you should get very little movement.

hope this helps.... :blush:

Link to comment
https://www.sau.com.au/forums/topic/266690-clutch-issues/#findComment-4554882
Share on other sites

  • 2 weeks later...

okay soo it is still doing it i have checked the rear main bearing and it seems to be fine.

i did however notice that when i installed the new clutch the spline/shaft (the thing at the front) had a lil movement in it like side to side,

im not sure but i dont think that it should have play, am i right?

jason

Link to comment
https://www.sau.com.au/forums/topic/266690-clutch-issues/#findComment-4572240
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I would like more noise related info for my truly uneducated guess  Does it do it at idle or when revving, clutch engaged, and disengaged? Does it only do it when the car is moving? I've heard "similar" noises from a clutch pack that left the chat room, and CV joints that have chewed themselves out But as Matt said, how's the yokes, tailshaft and centre bearing going after their last little issue Fingers crossed it is something simple  Weird noises make me cringe 
    • One other question, is there a chance that changing the idle speed can lead you down a rabbit hole and is the reason the tuner didn't touch it? Reason I ask is because if that's the reason the tuner avoided it then I probably shouldn't be touching it lol.
    • Pfft. As if I'd ever point a high pressure washer at my car.
    • The nature of my commute has changed. Way back then it was traffic lights all the way, for ~28km. It sucked. When they finally stitched the expressway together I could do a good 15+km of it at a steady 80-100 with no stopping. That alone has gotten me down to flat 10s. Prior to that it was mid-high 10s. I can't remember the delta that I saw when I got the idle down. It was only ~150 rpm, because the idle speed was never terrible, but for the delta in consumption to be noticeable it would have had to have been at least 0.2-0.3 L/100km - which is not to be sneezed at when it comes for absolute free. It's only about 50L per year, but that's ~$100. A few extra pizzas is always welcome. Note that I have a record of every tank of fuel that has ever gone through my car except for a handful put in by someone else, like my mechanic. I can show you the difference between stock RB20 and tuned RB20, stock RB5Neo and tuned, winter and summer fuel blends, winter and summer fuel blends when the ambient temperature is not appropriate for the blend, working O2 sensor, blown O2 sensor, boosting f**k out of it and frightened to boost it because it is pinging, and so on. OK, I probably can't do all that now with 100% clarity - but at the time when any of those things were in event, you could see it in the records. There's 25+ years of simple tank after tank records, so you have to look for landmarks to work out approximately how old any single record is. What's really important is the meta data and that lives in my head.
    • If you're claiming the issues are not skyline specific, then either the USA is living in the 90s / early 2000s, OR you have the issue of "survivor bias". Which is you're mainly hearing and listening to those with terrible experiences, and haven't found the guys who have cars with good decent builds and no problems. It happens in AU too, that plenty of people keep having issues, and they keep going to the workshops that are known to be shit "because I read on the internet". Even worse, are those who keep posting on the internet as though they know for a fact what something is, when they've never touched/looked at said item in their life, and again are making assumptions, based on something they read, or because it's a certain way in other cars. It's even funnier when those same people debate the facts with the people who've lived and breathed this stuff for over 15 years. Example, I've had someone tell me you can't do something with a Skyline, because they read it on the internet, except I can tell they're wrong, as I did that exact thing back in 2008 with my Skyline.
×
×
  • Create New...