Jump to content
SAU Community

Recommended Posts

I´ve used the search function, but haven´t found what I´m looking for.

I´m new to Perth (and Australia) and I´ve bought myself a Skyline a couple of months ago.

I´m looking for a shop/company that rebuilds turbos, mine has started to whine quite a bit, and I don´t want to buy a second hand turbo.

Looked through the consolidated work shop thread as well, but didn´t find anything there?

Perth is a pretty big city, someone have to be able to rebuild a turbo?

/Hampus

Link to comment
https://www.sau.com.au/forums/topic/266811-rebuild-turbo/
Share on other sites

+1 for Turbotech.

Another to try is:

MTQ Engine Systems

63 Beringarra Avenue

Malaga, WA, 6090

Phone 08 92091677

Fax 08 92091897

Email [email protected]

Web www.mtqes.com.au

Turbotech and MTQ are the two sole authorised distributors of Garrett trubos in WA. They both rebuilds tons of turbos.

Link to comment
https://www.sau.com.au/forums/topic/266811-rebuild-turbo/#findComment-4552947
Share on other sites

a gasket leak will either be a tick or a puffy type noise depending on where it is, a whine will be from your turbo developing shaft play (worn out bearing), thats assuming that the whine has been correctly diagnosed to be comming from the turbo area

+1 for perf4manz, they did the turbo on my s14a before i bought it, very reliable turbo but i dont know what work they do at the moment

+2 for mtq, they actually have a bolt on turbo for rb25's that using the gt3076 core and machined out stock housings, i have ordered one for a friends car, theres abit of a wait on these though

Edited by snozzle
Link to comment
https://www.sau.com.au/forums/topic/266811-rebuild-turbo/#findComment-4553764
Share on other sites

a gasket leak will either be a tick or a puffy type noise depending on where it is, a whine will be from your turbo developing shaft play (worn out bearing), thats assuming that the whine has been correctly diagnosed to be comming from the turbo area

+1 for perf4manz, they did the turbo on my s14a before i bought it, very reliable turbo but i dont know what work they do at the moment

+2 for mtq, they actually have a bolt on turbo for rb25's that using the gt3076 core and machined out stock housings, i have ordered one for a friends car, theres abit of a wait on these though

I know that there´s no leak, it´s definatily the turbo which is whining.

I´ve scrapped a couple of turbos before back in the days when I had Saabs :/

Never scrapped one on the Cosworth though... better quality perhaps :)

Link to comment
https://www.sau.com.au/forums/topic/266811-rebuild-turbo/#findComment-4556070
Share on other sites

Can you post up any quote/pricing you get plz? Would be good to know.

The Cossie :/

I´ve emailed them for a quote, I know that they probably can´t give me a firm price without having a look at it first, but hopefully they will be able to give me an idea of what type of coin we´re talking about...

I´ll post it when I here back from them....

Link to comment
https://www.sau.com.au/forums/topic/266811-rebuild-turbo/#findComment-4556071
Share on other sites

Can you post up any quote/pricing you get plz? Would be good to know.

The Cossie :P

1600 + GST for an original stock RB25 Turbo...

2200 + GST for an upgrade which would almost be equivalent to a GT30BB 100% bolt on with all the necessary fittings.

Link to comment
https://www.sau.com.au/forums/topic/266811-rebuild-turbo/#findComment-4566749
Share on other sites

Who was that quote from?

Was the original stock RB25 turbo, just repairing it? or was that giving it a steel wheel of same size as the ceramic ones?

The quote was from Turbotech, and that was for a original turbo with the ceramic wheel.

Link to comment
https://www.sau.com.au/forums/topic/266811-rebuild-turbo/#findComment-4569529
Share on other sites

Ouch, u can buy 2nd RB25DET turbos for 300$ on SAU. Why would u pay anymore for a turbo that is ceramic. Anything over 1000$ should be steel and preferably be ball bearing. So get a hiflo RB25 turbo for 2000$ or a GTRS for 3000$ in a kit

Link to comment
https://www.sau.com.au/forums/topic/266811-rebuild-turbo/#findComment-4569641
Share on other sites

Ouch, u can buy 2nd RB25DET turbos for 300$ on SAU. Why would u pay anymore for a turbo that is ceramic. Anything over 1000$ should be steel and preferably be ball bearing. So get a hiflo RB25 turbo for 2000$ or a GTRS for 3000$ in a kit

I've heard mixed reviews about high flow turbos. You might want to surf the forums to check out why. IMO, go for a GTRS kit, if you can't afford it now, buy a cheap replacement 2nd hand, and save up till you have enough for the GTRS.

Link to comment
https://www.sau.com.au/forums/topic/266811-rebuild-turbo/#findComment-4569814
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, that was one of the things we learned fast in the past with our MX5. When you drive with the top down, you are effectively standing out in the sun, 100% of the time, and not getting in any shade (because roads aren't shaded generally!). Just like standing out in the middle of a field on a sunny 27C day is a bit of a bad plan, so is sitting in a MX5 without sun protection.
    • I also just ordered some Frankenstein bolts and side mounts to fit a hard top Just in case I do find one, basically so it doesn't need to be fixed to the car with only the front latch.......and then gaffa tape to keep it in place for the RTN journey from wherever I get it
    • If your temps are fine now, you probably won't have any issues with where your vents are as they don't look right up at the windscreens high pressure area, so any differences when giving it the beans for extended happy laps would be minimal, but, they should vent heaps when stuck in traffic  Much like how that reverse cowl on my SS let "visible" heat out when stationary, but, because it was basically at the windscreen my coolant temps on the Hwy actually raised because air was being fed into it at speed (110kph), to only come back down to around 90° when I got off the Hwy And your 100% correct about the NC currently not needing vents, but, if I was to add a turbo, and a oil cooler and intercooler in front of the condenserand radiator, and then take it to the track???? It is apparently a recommend requirement if I don't want to worry about coolant or oil temp issues, but, any of the above are possible scenarios, over time As it sits now, with the triple pass radiator and stock air conditioning system, I have absolutely no issues with either temps or air conditioning efficiency, I've been basically daily driving thie car for the last month, both on the Hwy, and peak hour, bumper to bumper traffic, but, that's pretty much expected from basically a standard engine  Talking about no issues daily driving, it was 39° the other day and I was sitting in bumper to bumper traffic on the M5 and then M7, with the top down, and with the air conditioning blowing nice cold air on my feet, balls, and face, well, there was one issue, my head and arms got pretty sun burnt Note to self: leave a hat and sunscreen in the car for such days 🤣
    • I would agree, unless you need something specific to the HV motor/battery side repaired or investigated, any mechanic will be able to perform normal services, but if you prefer, maybe look for a mechanic who regularly services/repairs Nissans, the VQ engines are pretty common in the Nissan lineup.  Sorry, I can't make any suggestions, I don't live in Vic.
    • Some of them keep working fine. 9 out of 10 of them end up causing an absolute misery bleeding the system and get thrown on the workshop floor in a tantrum and never thought about again because they were never really needed and just added crap to the car that we could have done without. Same-same with HICAS, A-LSD, and various other stupidities that over eager 10x engineers thought we had to have.
×
×
  • Create New...