Jump to content
SAU Community

Recommended Posts

Craig don't you have the Haltech installed? Is it the PS2000?

Had a Haltech Platnum series.....go rid of it a long time ago!

Now have a Nismo piggybacked with and E-Manage Ultimate......I have bugger all low end restrictions with throttle or Cam's......as seen first hand by PN-Mad both in 2WD and 4WD!

Had a Haltech Platnum series.....go rid of it a long time ago!

Now have a Nismo piggybacked with and E-Manage Ultimate......I have bugger all low end restrictions with throttle or Cam's......as seen first hand by PN-Mad both in 2WD and 4WD!

Ahh ok...I think the Etuner's site has your car there listed with haltech....that's why I asked

Had a Haltech Platnum series.....go rid of it a long time ago!

Now have a Nismo piggybacked with and E-Manage Ultimate......I have bugger all low end restrictions with throttle or Cam's......as seen first hand by PN-Mad both in 2WD and 4WD!

i still cant get over this.. mines still yuck on take off lol..

i wanna see it happen in Video form!

I had the Impul on by itself......I also had just put on the suction pipe and the fabricators had not followed my instructions correctly so I had a slight over boosting problem and as the Impul has no restrictions it helped me to melt a cylinder.

Never had a PS2000 on my car!

Ironpaw where is this Etuners site you speak of....I might have to go and update it a little!huh.gif

.....and if I remember correctly OZ is punching bigger numbers than Japan with the E-manage ultimate with a VQ25det!

You don't remember correctly.

450awps (331awkw) has been done in a street registered NM35 in Japan.

Scott isn't there yet... at least not until the new turbo is installed (if it ever fkn arrives!!).

Having said that, all the "big number" NM35's in Japan have had their capacity increased to over 3L.

Much more impressed with the 2.5L numbers Aus is producing!

i still cant get over this.. mines still yuck on take off lol..

i wanna see it happen in Video form!

I need to find someone stupid enough to sit in the car with me and film:P....where Andy when I need him...lol!....I wont do it again until the shift kit goes in either!.....then I might have to do a quarter run!

Edited by Jetwreck

So with the throttle restrictions; can someone with a stock ecu & an informeter tell me what they get as an output from the "Throttle %" if they flatten the accelerator from a stationary position? Does that corroborate the restriction or is it 'futher' along the line?

You don't remember correctly.

450awps (331awkw) has been done in a street registered NM35 in Japan.

Scott isn't there yet... at least not until the new turbo is installed (if it ever fkn arrives!!).

Having said that, all the "big number" NM35's in Japan have had their capacity increased to over 3L.

Much more impressed with the 2.5L numbers Aus is producing!

Scott's will smash that on E85......shit I recon I'll get to that with a shift kit and 100 Octane and 20PSI and no F-Con Pro!

Scott's will smash that on E85......shit I recon I'll get to that with a shift kit and 100 Octane and 20PSI and no F-Con Pro!

Take a breath Craig.

That 450awps was on pump... and yes, I know Scott will smash that power level... and yes I know that with the old turbo, his car had very little lag.

Oh, I should mention that particular car wasn't using the Fcon V-Pro... it was using the iS.

So with the throttle restrictions; can someone with a stock ecu & an informeter tell me what they get as an output from the "Throttle %" if they flatten the accelerator from a stationary position? Does that corroborate the restriction or is it 'futher' along the line?

I ran a cable throttle and still had the same takeoff, the cams go into full retard below 35? Kph to negate the need for traction control and make the car nice and friendly do drive. I will have the stock cam mapping data soon when I install the Vmanage so I will let you know exactly what it does.

Take a breath Craig.

That 450awps was on pump... and yes, I know Scott will smash that power level... and yes I know that with the old turbo, his car had very little lag.

Oh, I should mention that particular car wasn't using the Fcon V-Pro... it was using the iS.

I'm breathing just fine buddy!

Hey did they post up the dyno sheet.....I remember seeing a couple but that was a while ago.......want to compare to Scott's and mine....cannot find in in my J a p browser for some reason!

So what's that advantage of the Fcon units?

Edited by Jetwreck

I ran a cable throttle and still had the same takeoff, the cams go into full retard below 35? Kph to negate the need for traction control and make the car nice and friendly do drive. I will have the stock cam mapping data soon when I install the Vmanage so I will let you know exactly what it does.

DO WANT THIS!!!

hurry up!!! before my reno funds dry up!! :ninja:

No dyno sheet unfortunately.

Both F-con's intercept the signal from the ECU to the engine and modify it as per the tune, but they are quite different.

Fcon iS is pretty much an eManage Ultimate + Vmanage, but with a Video output... and it looks pretty (not that you'd see it :P).

That being that it add's/subtracts to the OEM ECU's signals (timing, fuel etc etc).

The problem with this is that the stock ECU is damn clever and will react to the return signal accordingly.

(ie Ecu sends signal to engine, iS intercepts signal and adds a fixed number of degrees to the timing, signal returns from engine to stock ECU, ECU takes additional timing out to bring it in line with what the stock levels "should" be, iS intercepts and adds it's fixed number again - which is now less due to the reduction in timing in the "send" signal from the ECU).

I guess the trick here is to tune outside of the stock ECU's limits :)

Fcon V-Pro intercepts the OEM ECU signal and completely replaces the them with the "tuned" information, so regardless of what the stock ECU receives and adjusts for in the return signal, the V-Pro dictates the parameters in it's "base" tune to the Engine.

Edited by iamhe77

So with the throttle restrictions; can someone with a stock ecu & an informeter tell me what they get as an output from the "Throttle %" if they flatten the accelerator from a stationary position? Does that corroborate the restriction or is it 'futher' along the line?

I think it is 79%. If no one else weighs in to say differently l can plug it in & do a test. I do know that I can't get above 87%, ever.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Ok glad you clarified on the frenchy’s options , I was worried about if my oem hoses would fit the new compressor or not if I just bought the bracket/compressor kit ,  didn’t realize they also sold a larger full conversion kit. Hmm may just go oem in that case then to make it easy only because I plan to sell this car to upgrade to a 32 GTR or 34 GTT.
    • Right, here's a video of the basic operation at least.  This is what you can expect day to day when you turn the car on and it boots from standby.  The only thing from a media point of view I haven't gotten working is for it to autoplay plexamp when it turns on from standby (it works from cold boot) but that's more of a plexamp problem as it will autoplay other music players.  Also attached is my one stray cable.  It's part of the screen's wiring adapters but there's just nowhere for it to go in my car.  I've just now done a bit of research and found a matching port on a 2010-2014 head unit with BOSE.  Mine has no BOSE so that's that case pretty much closed I think.  Plugging in the Infiniti AC panel basically did nothing for me, so that's a dead end as well.  Next port of call is to mess with this CANBUS module and see what I can find from it.  I found this resource containing the DBC files for a 2010+ G37 : https://github.com/icecube45/Dash_InfinitiG37/blob/master/InfinitiG37.dbc I'll now have something to go from when I try to extract my CANBUS data so I can see if the HVAC Mode, Fan Speed, Temperature, etc. match and also the gear shifter position.  It's a pretty big assumption that it's just mismatched CAN signals but considering all the devices in the CAN network are talking to each other (AC can be fully adjusted just with no info on screen) it might be a safe one.  I will report back WhatsApp Video 2025-02-26 at 12.49.10.mp4
    • Thanks for that Paul.  Do you think if I posted a picture you'd be able to remember where it went? 
    • Sorry Duncan, I didn't get a notification for the replies.  Thanks for responding!  It's a full Android device, but does allow you to use CarPlay/AA as well.  This is the one I bought from NaviRS on AliExpress: https://www.aliexpress.com/item/1005006368602668.html?spm=a2g0o.order_list.order_list_main.111.59aa1802JDzQ0E - the 2K 8G-256G CAM variant but it seems to have gone up by £170 since I bought it!  My purchase was £307.14.   It's not the fastest thing in the world but performs perfectly adequately.  It stays on standby unless I disconnect the battery and let it power down, then it's just a fairly standard Android bootup time from cold.  The DSP Equaliser is very nice and made the standard stereo system sound pretty decent compared to the stock screen.  Perhaps I can take a video of it when I get a sec. It *allegedly* supports the reverse camera, but I'm yet to get that working.  It has options for reverse cam (a camera unit can be bought separately) or 360 cameras (also bought separately).  To be fair it doesn't seem to detect that the shifter was put into reverse but I'm working on a theory about this as well.  At the moment I'm going without which is a bit annoying considering the car is an absolute canal barge but so far I haven't caused any damage I'll grab a picture of the wire I'm missing later today when I can get outside.  My theory, by the by, is that not only is the head unit different, but the CANBUS network has different signals for the different years.  I think this because I have a spare AC panel from a newer Infiniti G37 (as opposed to my Nissan panel) which wouldn't control anything except the volume when I had it wired up with the stock system.  I'm going to throw it back in and see if the screen will respond to it.  I've just ordered an arduino CANBUS module so I can have a look at the signals going around the car and see if I can spot anything.  I'm thinking if I can work out what it's expecting vs what it's getting I might be able to translate and relay the signal back but so far just a theory anyway. I also found this on my travels, so far the only one that specifically matches my car: https://www.aliexpress.com/item/1005002822934280.html?spm=a2g0s.imconversation.0.0.33433e5fgttovi If you look at the picture of the before, it has the card reader slot, and the picture of the head unit is exactly the same as the one pictured in my original post.  I asked if they sell the cables separately but sadly they won't.  I didn't want to just buy this one because it's a super old Android version and only dual core - likely slow as hell. 
    • As above, you did refill the coolant and burp the system before running it again didn't you?
×
×
  • Create New...