Jump to content
SAU Community

Recommended Posts

The passenger side window is playing up on my R34 GT, the front of it goes down faster than the back, the back seems to get stuck, and then the whole window gets stuck and i cant get it down or up. If i open the door and push the button for awhile eventually it sometimes goes back up. But then it hit the seal on the door, and i cant close it unless the door is open anyway.

I havent owned my car for very long, and to my knowledge the previous owner didnt have this problem. However i think what has happened is the previous owner got his sound system professionally installed, and they messed it up. If i take off the door panel and try to see what is going on, i cant see anything wrong with the rollers, but there is a lot of speaker wiring in the door, and i think it is getting wrapped around the front roller of the window, so when i push the button it drags the front down and then gets stuck in the roller so the window cant move anymore...

I just wanted to find out if anyone else has had a problem like this with their window, or if you think it is those speaker cables? If you do think it is the cables, does anyone know how to get the glove box out? I presume the wiring would go behind the glove box, so if i could get it out then i could pull the excess wiring through from the door and cable tie it somewhere, but i cant see how to get the glove box out, ive removed all the screws i can see and it still wont budge at all.

Cheers for any help =]

Link to comment
https://www.sau.com.au/forums/topic/267003-r34-gt-passenger-window-problem/
Share on other sites

Hey fella, i have had the same problem with my window too. When i wind it down it clicks alot and the front will go down first?? and when you wind it up the back will go up first and the front will follow?? i took my door card off to find out the problem and there is a little plastic bush on the window half scissor system and this has broken so its f**ked! i tried to glue it back together but snapped straight away again! maybe a new system will be needed?? if you get chance to look again just look where the arm meets the slider and it will be around there. hope this helps mate

found a similar problem with my 34 today, the drivers window keeps wanting to go down (i can put it up about 1/3rd of the way then it winds down again) the motor sounds fine, could be the relay i guess.. trying to figure out how to get the door skin off at the moment :D

Hey fella, i have had the same problem with my window too. When i wind it down it clicks alot and the front will go down first?? and when you wind it up the back will go up first and the front will follow?? i took my door card off to find out the problem and there is a little plastic bush on the window half scissor system and this has broken so its f**ked! i tried to glue it back together but snapped straight away again! maybe a new system will be needed?? if you get chance to look again just look where the arm meets the slider and it will be around there. hope this helps mate

Yeh that sounds pretty much like what it does. I guess it could be that, but i couldnt see anything with the actual window system that looked wrong, and my window is actually working pretty well now except that now the passenger side switch is broken and it can only be rolled up and down from the drivers side. Took the switch out and found that the little clips that hold the rocker in place have all snapped off, so i need to buy a new switch, which is f**ked!

Anyway, it appears to be working pretty well if i do it from the drivers side, it isnt going down on an angle anymore. Except the seal is coming off the door, so i have to open the door to wind it back up with the door open =[

Seriously, power windows are so shit, manual windows are so much better!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So....to find any R chassis part number, get your VIN (will be something like ER33-xxxxxx for you) and go to: https://www.amayama.com/en/genuine-catalogs/nissan and enter it. From there you have access to a web version of Nissan's part system, FAST. It is a bit tricky to get used to, so maybe have a shot and post up what you think.  You can also search by general model but note in some cases your car might have different options so VIN is safest.  On diagram 211 I got 14075-75T16 for Connector, Water Hose If I search for part 14053‑21U10 that you posted, that is also a water hose but not the one bolted to the plenum and 14075‑04U00 is the fitting where the water hose goes into the block.
    • Yeah now we are talking I much prefer coolers in the front middle because it lessens the chance of a small bump to a corner stopping the whole event. I was thinking the AT cooler can move out of the radiator, delete the AT/engine coolant interwarmer and mount a separate cooler with a thermoswitch somewhere further back as is common in racing, that would be one thing. Beyond that, the engine oil cooler is an obvious one to move to the wheel arch, potentially one on each side, but unused space is an issue. I did have a earlier pic with the bumper off but it doesn't show how busy the corners are: DS is full of the auto driving sensors and PS is totally fully of windscreen washer fluid reservoir But ultimately I was hoping to keep the AC, and the water/air heat exchanger is fundamental so it is not just the radiator that needs to be in front BTW here's airflow to the rad as it ran at the track (one horn is gone now and I'll remove the lights next time):
    • your right the maps for Australia came out in 2017 but are 2010 maps. i got the updated maps SD card put it in and it was the same. Same maps in my Brothers Nissan Patrol. 2020 i think his car is
    • Yeahhhh, the costs have killed me. Spent more than the cost of an engine rebuild and it most mostly servicing and a tune lol.
×
×
  • Create New...