Jump to content
SAU Community

Mines Ecu For R33 Gtst


Recommended Posts

I've got my mines chipped ECU for sale which i used in my AUTO - this will suit both manual and auto series 1 r33's, im not sure if it works on series 2.

Specs are:

- Removed rev limiter

- Richer maps to handle hiflow turbo + breathing mods + ~15psi boost. AFR's were at 11.8-12 on boost and ~15.1 AFR cruising.

- Annoying boost cut/r&r removed. I'd log a 5.1v @ 4500rpm and it wouldnt even hesitate to rev.

- would give me 460km to the tank +/-30km depending on how i drove.

Im after $300 + post. by far the BEST bang for your buck mod - you'll notice the power difference instantly even on a standard setup.

I can be contacted via PM or post here.

Pics will be up soon.

Cheers,

Joe

Link to comment
Share on other sites

not sure on an actual figure mate but i would estimate around 210-215kw when i was running around 10psi, i cant comment on 15psi as i wasnt getting traction at all but it felt awesome. believe me, if you had this in your car you would be confused as to why these things are going for so cheap!

Link to comment
Share on other sites

not sure on an actual figure mate but i would estimate around 210-215kw when i was running around 10psi, i cant comment on 15psi as i wasnt getting traction at all but it felt awesome. believe me, if you had this in your car you would be confused as to why these things are going for so cheap!

Yeah mine has 201kw with standard ecu and injectors on 13psi, did yours have bigger injectors with the mines ecu?

And wats the go if u wanna go run 18psi with this ecu, is there much stuffing around?

Link to comment
Share on other sites

where ur location?

sydney west

Yeah mine has 201kw with standard ecu and injectors on 13psi, did yours have bigger injectors with the mines ecu?

And wats the go if u wanna go run 18psi with this ecu, is there much stuffing around?

nah mate it had standard injectors. to boost it up to 18psi you wont need much work - just turn up the boost lol.

either way i wouldnt do more than what i said in my first post without getting on a dyno and checking that your AFR's are ok.

im interested. Is it good @ fuel and air flow tuning?

read my first post mate, all the info is there. its not a tuneable computer hence the reason why its so cheap. you just plug it in and off you go.

if you wanted to tune it you'd strap a emanage blue or ultimate to it and you'll be sweet. it will still cost you less than getting a full aftermarket computer if you wanted to go bigger injectors etc etc later on.

Link to comment
Share on other sites

I've got my mines chipped ECU for sale which i used in my AUTO - this will suit both manual and auto series 1 r33's, im not sure if it works on series 2.

Specs are:

- Removed rev limiter

- Richer maps to handle hiflow turbo + breathing mods + ~15psi boost. AFR's were at 11.8-12 on boost and ~15.1 AFR cruising.

- Annoying boost cut/r&r removed. I'd log a 5.1v @ 4500rpm and it wouldnt even hesitate to rev.

- would give me 460km to the tank +/-30km depending on how i drove.

Im after $300 + post. by far the BEST bang for your buck mod - you'll notice the power difference instantly even on a standard setup.

I can be contacted via PM or post here.

Pics will be up soon.

Cheers,

Joe

Is it still for sale?

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • That's true. However, this problem has started since the tuning. First time with the return journey from the tuning. But yes, the pipe was clogged with dirt and rust. That was certainly due to age
    • Great info @tidi0x  Will definitely be handy for others and maybe me if I decide to keep the shit box H pattern.
    • Bumping this up one last time.... I wanted to follow up on the clutch slave issue. I realized that what the issue comes down to is the pocket is flat milled, and the cylinder does not want rest flat. So in order to mount it correctly you will need to make a spacer for the fingers so the cylinder is floating. I took two plates of aluminum, drilled some holes and was good. I did still need to make the relief cuts in the bell housing, as even with the spacer the bleed section still interferes. The OE bell housing the mounting holes are raised from the housing.       
    • If the event in USA goes ahead will be interesting as it seems the rules will get more cars over here. Apparently the track is laguna seca too. Yeah s15, if I get a the lower dash trims, centre console and change front cross member to standard LCA position will fit clubsprint. See how rules are as i would rather do complete widebody than a bolt on flare to run the 295 with proper clearance.
    • If the car is legal height I can't see it being an issue. Found a thread on reddit that might offer some insight.   I got a ticket from a copper in QLD for my S15 being too low. They had this wheel thing on a stick that they put under the car and it hit my exhaust. Anyhow went to an exhaust shop to get the exhaust tucked up/hung a little higher and I wound the coilovers up a smidge. Don't think I even had to go back to the police station unlike when I got defected for having a carbon bonnet when I brought the S15 from the ACT to QLD and had to replace it and then rock up at a police station and have a yougish female officer who knew nothing about cars confirm that I had changed bonnets. Should have just painted the carbon bonnet yellow to match the rest of the car lol
×
×
  • Create New...