Jump to content
SAU Community

Recommended Posts

hey guys the last round of the 08/09 drift series is on next sat may 2nd. hoping it to be a big one so invite every1 you kno and support your sport

i shall be debuting my 32 4 door now with rb25, will be the first tiem out since november last year so expecting a few gremlins and to be a lil rusty. hope to see you guys there anywayz.

0e199169e6.jpg

thanks rhys for waking up at 6am and taking my tyres to track, thanks to benson, scott, niksmo, and everyone who helped me out on the day,

be back next season making alot more noise,

even got a yellow sticker on way home :P

i told the cop all about my day drifitng but i dont think he cared

theres a few pics of me qualifying in dads s13/15, i got a flat front tyre in qualifying so had to use his

post-45341-1241409150_thumb.jpg

post-45341-1241409202_thumb.jpg

post-45341-1241409227_thumb.jpg

post-45341-1241409276_thumb.jpg

post-45341-1241409319_thumb.jpg

post-45341-1241409370_thumb.jpg

post-45341-1241409410_thumb.jpg

post-45341-1241409444_thumb.jpg

post-45341-1241409473_thumb.jpg

post-45341-1241409522_thumb.jpg

post-45341-1241409771_thumb.jpg

Guest
This topic is now closed to further replies.


  • Latest Posts

    • Latest round of updates on the car. I purchased and installed a SWS clutch slipper to help with 60ft times and got some second-hand good condition 275/40R17 Hoosier DR2 radials. Test and tune in November showed the tyres were an upgrade over my over 15 year old mickey Thompson's and I got a 1.8 second 60ft and pb et of 11.71 but even then, that run wasn't great due to rain and driver error (the event got called off 10 minutes later fast forward to the weekend just gone 25th of Jan and there was finally a break in the weather to let racing happen. The first run the track was slippery and only managed a 12.1@129 Second run the track was better and got a new pb et and mph: 11.54@131   Lith and I then worked out that I installed the previously mentioned clutch slipper incorrectly and its never been working, and I had just been dumping the clutch the entire time, we also noticed it was on street boost and not race boost. So I lined up for a third run with the car turned up in the first two gears, but the passengers side axle objected to clutch dumps and left the chat which stopped my weekend.   so there will be another attempt in the future once I replace the tyres as they rubbed and are stuffed now. but a low 11 should be on the cards.
    • Ceramic coating and heat shielding, you mean?
    • Turbos don't require pulling the motor apart so that's "easier". I would recommend the Nismo R3 turbos instead if you want to do stock twin turbo. It doesn't make as much power as the 2530s but it's only like ~50 whp off the mark and should have better response (ball bearing CHRA, slightly smaller turbo). A local that went with a Garrett G30 and 6boost manifold recently nearly burned his car to the ground after the hood insulator started melting and and burning so if you go single turbo I recommend doing a lot of research and validation work to make sure you don't do the same.
    • New rear lights, filler panel sprayed, cleaned and back together    before, during, after shots 😍
    • 100% is gyprock, I agree. Slip of the keyboard. Haha! I left my indicator bulbs out to save a bit of weight.
×
×
  • Create New...