Jump to content
SAU Community

Recommended Posts

Hello everyone.

I was reading a bit on this forum and trying some searching.

I'm thinking of buying a 2009 Skyline GTR or a Series II if it'll be available soon.

My question is:

What's the most power that can be had from doing a forced induction upgrade on full time race gas, keeping all factory accessories like A/C? Tranny upgrade is ok if needed. The car won't be driven too often, just weekends.

Is 800 RWHP possible. (600KW)

Thanks.

Edited by skylinesoon
Link to comment
https://www.sau.com.au/forums/topic/267124-fi-question/
Share on other sites

Yes

Thanks.

I don't do big jobs like this myself on my cars, what company would you recommend I use to do the work? If there's one in the USA great, if not who would you recommend in Austraila to give the car to?

I live in Miami, Florida.

So how much HP can these engines handle if I wanted to go more than 600KW?

Link to comment
https://www.sau.com.au/forums/topic/267124-fi-question/#findComment-4556468
Share on other sites

You will probably spoil your warranty if you mod it!

I have a stable of cars with no warranties. Its ok.

I've really like the Skylines for many years, like 20 years to be honest. I pretty much mod everything I own, even my E55 Merc is modded. Here in Miami, its kind of a hobby to alot of us to have high hp street cars. The Skyline is a great piece of engineering and people here are starting to pop up with modded ones, so I think I'm ready to go for one, but it needs to be able to hang with the cars around here. And the cars in this area are no joke.

Link to comment
https://www.sau.com.au/forums/topic/267124-fi-question/#findComment-4556486
Share on other sites

^^ US is leading the way anyway... the best tuning solutions seem to come from there ATM... the only exception is the haltech piggy back system but i still prefer the idea of flash based us based sytems.... similar to vcm suite etc... im sure once the factory ecu is FULLY unlocked it will be force to be reckoned with.

Link to comment
https://www.sau.com.au/forums/topic/267124-fi-question/#findComment-4556508
Share on other sites

^^ US is leading the way anyway... the best tuning solutions seem to come from there ATM... the only exception is the haltech piggy back system but i still prefer the idea of flash based us based sytems.... similar to vcm suite etc... im sure once the factory ecu is FULLY unlocked it will be force to be reckoned with.

So can you point me in the right direction of a top shop here in the USA I can contact?

I'm prepared to go all out with a new GTR.

Link to comment
https://www.sau.com.au/forums/topic/267124-fi-question/#findComment-4556514
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey all, I did a voltage test with the car (video attached) not running for 3 days. And here is some interesting stuff: - Battery voltage is 12v (I had the key in the ON position) - Drops to 9.76v while cranking then quickly goes up to 14.5v - You will notice there was a sorta slow start but not as slow as it usually is. - Idle surprisingly was better at just over 1,000rpm instead of 1,100 rpm. - I turned on the A/C, radio and headlights in the video and the voltage remains the same - I haven't cleaned the grounding wires on the chassis yet, that's next. - Battery drops to 12.6v when I turn off the car and wait a bit Seems like I might have a parasitic draw? I do have an immobiliser system which does drain the battery more of course but was wondering if there is anything else I should be looking at fixing? Does the ground wires on the chassis have anything to do with the low 12v?       
    • My lord that is some low oil pressure as minimum in the manual! I guess the big part will be seeing how it changes as the engine gets more spirited use.
    • Turbotapin   so I am about to be mounting mine up been waiting for the body to get finish at paint. I had a question. I was told our Speedo sensor it originally in the transmission but the cd009 is in the diff on the z. How did you get around this? 
    • I definitely do recommend having a fab/grinding/dirty shed or area to keep all that grinding dust out of your main shed.  But you're right, it doesn't matter how much room you have you still end up filling it! I might even do a short video which will make it easier to fully take in the horrors of what I've created...
×
×
  • Create New...