Jump to content
SAU Community

Recommended Posts

if you've only got 5k it will be pretty tight. The only real option is to buy something already built.

go here and look for anything where the asking price is 10k. offer them 5 and voila you have a track car.

http://www.my105.com.au/default3.asp?id=39...sortby=PriceASC

expect it to need work but at least it will come with the wheels/suspension/cage/seats/belts that you need.

heres some, first couple are the best bet I think

http://www.my105.com.au/classified.asp?id=11481

http://www.my105.com.au/classified.asp?id=11022

http://www.my105.com.au/classified.asp?id=10241

http://www.my105.com.au/classified.asp?id=10679

not prepared but a good choice for under 2l categories if you have the extra 10k to finish it

http://www.my105.com.au/classified.asp?id=10814

http://www.my105.com.au/classified.asp?id=10996

http://www.my105.com.au/classified.asp?id=11646

R31, with vlt conversion and s13 suspension, r32 brakes. would be right on the limit of your budget but doable i think.

either that or an old corolla, be it older rwd, or later fwd model. early civics are a chance too

bike? or one of those small things that use bike engines but look like V8 supercars. how much are they worth?

Yeah 5k there isnt much out there...

Bobby's answer is the best, go kart and plenty left for a trailer and parts and fuel :laugh:

Otherwise....

If 5k is your budget, its really an r31/vl non turbo, then suspension and brakes and exhaust and intake. Strip what you dont need. might have some $ left for a seat and harness

weld the diff.

Can do the same for the KE70 rolla's.

you'd be hard pushed to buy an mx5 for 5k or under.

edit - you'll need good tyres too...that'll limit costs..

series 2 nissan bluebird 910 sedan about $1000 for a good example

-2ltr high compression L4

-5 speed manual

-elec ignition standard

-elec fuel pump standard

-therno fan standard

fit s13 coilovers and brakes to the front and coilovers to the back about $1500

r31 front brakes are a bolt for bolt mod (if s13 det brakes are not used instead - $500 from coilovers and add about $150)

r31 or s13 front sway $30

Good clutch $150

TRX and LX had the disk rear end (range from $150 - 300 if fitting afterwards)

dif is a bit weak so upgrade to the later h190 dif out a series 3 bluebird then weld it (centres for either h165 or h190 are about $75 to 100 each but need the right beam axle for centre - see above cost - less for drum of course)

save up and fit twin 45mm webers ($1000) or slot a ca18, sr20, z18 or fj20 in with nothin but a soldering iron and a spoon - you may need to fit a series 3 ca20s 910 front cross member for ease of fitment

S13 turbo 15 inch x 6 inch mags $200

all out a quick easy build will cost about $4100

factor in harness, seat, semi tyres, roll cage and strut brace... but they are irrelevant depending on racing type and most of the above can be sourced for less if you pick up a s3 trx or a less than prime example

wouldn't hurt for fresh rings and bearings in the old L20 after 25 years

subtract spare wheel, interior, sound deadening, unnecessary electrics, bumpers if necessary you will be under 1000kg easily (about 1100kg standard)

Edited by 910trx

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah I'm keeping an eye on it and might take it out as a once off if this doesn't fully charge. I did some research that said it's normal in equalisation charging. Voltage I thought was 20+ (faulty battery in multimeter) but now its on 15.9v, the max it should go to is 16.2v as per the manual. I'll provide an update once hopefully it's actually fully charged and in float mode. Waiting for it to go to 16.2v and not higher and see what happens. What I suspect has happened is that even though it's not an old battery, I did leave the car turned off for almost 4 weeks at one point then left it off for another 2 weeks which might have erroded the battery and is taking a long time to do this equlisation charge.
    • I wouldn't be using the seats a lot since it's on Historic rego and will not be driven a lot, however I also don't want to fork out 3k for something that won't last. Havent looked at BRZ seats, aiming for something of the same era I did speak to him on the phone once, and I do see your point haha. How many kms do you think you drove before they started wearing out? Just had a look at yours, certainly looking for a reclinable version. The Brides don't look too bad! I would still like to sit in one just to make sure it's what I'm after.    Thanks for the replies fellas. 
    • I bought my Bride reps from Crank Motorsport. He is, um, a trifle disorganised. I would have to look back at the e-mails to make sure I got it right, but I think he sent me normal fabric ones when I ordered the "Alcantara" ones. So he had to pay for shipping 3x and I'm sure that f**ked him off big time. And asking technical questions where nuanced English is required is a no go. It's simple English only. And....should I have bought the Alcantara ones? Well, as it turns out, they are great, feel great, etc, but the fabris wore through on the point of the waist bolster in <2 years. Must have caught a rip from a rivet on jeans or shorts, or something like that. So now I have to patch it somehow. A bit shit. My fault, ultimately, because it is Chinesium Faux Alcantara, not the real thing, and it turns ot that it has the tear resistance of a soggy tissue. But the seats and the reails are great. I probably should have gotten the R34 style ones, and now that they price is up in that ridiculous sort of number, I could have sold them for a profit!
    • Another recco is to just let it rest for a while and go back and reconnect later.
    • keep an extinguisher nearby? or even better, take it out of the car to charge?
×
×
  • Create New...