Jump to content
SAU Community

Recommended Posts

if you've only got 5k it will be pretty tight. The only real option is to buy something already built.

go here and look for anything where the asking price is 10k. offer them 5 and voila you have a track car.

http://www.my105.com.au/default3.asp?id=39...sortby=PriceASC

expect it to need work but at least it will come with the wheels/suspension/cage/seats/belts that you need.

heres some, first couple are the best bet I think

http://www.my105.com.au/classified.asp?id=11481

http://www.my105.com.au/classified.asp?id=11022

http://www.my105.com.au/classified.asp?id=10241

http://www.my105.com.au/classified.asp?id=10679

not prepared but a good choice for under 2l categories if you have the extra 10k to finish it

http://www.my105.com.au/classified.asp?id=10814

http://www.my105.com.au/classified.asp?id=10996

http://www.my105.com.au/classified.asp?id=11646

R31, with vlt conversion and s13 suspension, r32 brakes. would be right on the limit of your budget but doable i think.

either that or an old corolla, be it older rwd, or later fwd model. early civics are a chance too

bike? or one of those small things that use bike engines but look like V8 supercars. how much are they worth?

Yeah 5k there isnt much out there...

Bobby's answer is the best, go kart and plenty left for a trailer and parts and fuel :laugh:

Otherwise....

If 5k is your budget, its really an r31/vl non turbo, then suspension and brakes and exhaust and intake. Strip what you dont need. might have some $ left for a seat and harness

weld the diff.

Can do the same for the KE70 rolla's.

you'd be hard pushed to buy an mx5 for 5k or under.

edit - you'll need good tyres too...that'll limit costs..

series 2 nissan bluebird 910 sedan about $1000 for a good example

-2ltr high compression L4

-5 speed manual

-elec ignition standard

-elec fuel pump standard

-therno fan standard

fit s13 coilovers and brakes to the front and coilovers to the back about $1500

r31 front brakes are a bolt for bolt mod (if s13 det brakes are not used instead - $500 from coilovers and add about $150)

r31 or s13 front sway $30

Good clutch $150

TRX and LX had the disk rear end (range from $150 - 300 if fitting afterwards)

dif is a bit weak so upgrade to the later h190 dif out a series 3 bluebird then weld it (centres for either h165 or h190 are about $75 to 100 each but need the right beam axle for centre - see above cost - less for drum of course)

save up and fit twin 45mm webers ($1000) or slot a ca18, sr20, z18 or fj20 in with nothin but a soldering iron and a spoon - you may need to fit a series 3 ca20s 910 front cross member for ease of fitment

S13 turbo 15 inch x 6 inch mags $200

all out a quick easy build will cost about $4100

factor in harness, seat, semi tyres, roll cage and strut brace... but they are irrelevant depending on racing type and most of the above can be sourced for less if you pick up a s3 trx or a less than prime example

wouldn't hurt for fresh rings and bearings in the old L20 after 25 years

subtract spare wheel, interior, sound deadening, unnecessary electrics, bumpers if necessary you will be under 1000kg easily (about 1100kg standard)

Edited by 910trx

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This lady loved her FD for 25 years!  https://www.topspeed.com/80-year-old-woman-donates-fd-rx-7-mazda/ My brother in law. He's nice enough to let me drive it whenever. He'll likely not see this, but I'll try: @r-is-for-fun got any pics?
    • Just something I found searching for more info on Emotion R, apparently the ECR33 Skyline GTS25t was either originally black, or there were two of them, the black one being the original demo car, then building a white one which was part of the 1997-onwards (to at least 2008!) Cockpit Tatebayashi Tokyo Auto Salon booth demo cars. It appears that Emotion R closed down in 2008 and was declared bankrupt in 2010: http://bank-db.com/hasan/208365. Scan of a magazine with the black R33 from 1996: Wayback machine archived page from May, 2000: https://web.archive.org/web/20000529061027/http://www.emotion-r.co.jp/skyline.html Option magazine with a few photos from the Cockpit Tatebayashi booth at the Auto Salon from various years: 2002: http://www.jdm-option.com/photo/index.php?action=item&category_id=154&image_id=3507 2003: http://www.jdm-option.com/photo/index.php?action=item&category_id=137&image_id=3033 2005: http://www.jdm-option.com/photo/index.php?action=item&category_id=116&image_id=1831 In 2008 Cusco website mentions that the Cockpit Tatebayashi ECR33 was displayed at that year's Tokyo Auto Salon: https://www.cusco.co.jp/event/2008/12/post_735.html As of 2021 it appears that the ECR33 demo car ended up being exported to Florida, USA: https://rmcmiami.com/inventory/1996-nissan-skyline-r33-cockpit-tatebayashi-demo-car-big-te06-turbo-endless-brakes-lsd-450hp/ And finally here's Google streetview of the Emorion R garage in 2023 which is amazingly not only still there, but the showroom is still full of various parts in stock and funishings, etc.: https://maps.app.goo.gl/ttyEAZdZLyzermyT9 Apologies for nerding out a bit. I used to love doing this 20 years ago on SAU and got a bit nostalgic for a moment... 😅
    • Try fabricating something like this and install it under the pedals? Not sure if it's legal or not....
    • Even though I have some pretty good (brand) ratchet ringies, I avoid using them to break open tight bolts. A broken ratchet is very annoying.
×
×
  • Create New...